/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.4.3-arch1-2] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WDS100T1X0E-00AFY0 Serial Number: -- Firmware Version: 614900WD PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 8224 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Thu Jul 20 13:02:27 2023 PST Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x00df): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Verify Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 84 Celsius Critical Comp. Temp. Threshold: 88 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.00W 9.00W - 0 0 0 0 0 0 1 + 4.10W 4.10W - 0 0 0 0 0 0 2 + 3.50W 3.50W - 0 0 0 0 0 0 3 - 0.0250W - - 3 3 3 3 5000 10000 4 - 0.0050W - - 4 4 4 4 3900 45700 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 48 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 1% Data Units Read: 47,768,665 [24.4 TB] Data Units Written: 41,885,717 [21.4 TB] Host Read Commands: 209,474,345 Host Write Commands: 76,843,599 Controller Busy Time: 402 Power Cycles: 578 Power On Hours: 6,011 Unsafe Shutdowns: 54 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/nvme1n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.4.3-arch1-2] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WDS500G3X0C-00SJG0 Serial Number: -- Firmware Version: 102000WD PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 8215 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Thu Jul 20 13:02:27 2023 PST Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Log Page Attributes (0x02): Cmd_Eff_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 80 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.50W - - 0 0 0 0 0 0 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 48 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 129,260,100 [66.1 TB] Data Units Written: 84,715,263 [43.3 TB] Host Read Commands: 601,785,366 Host Write Commands: 519,995,906 Controller Busy Time: 1,479 Power Cycles: 2,798 Power On Hours: 23,083 Unsafe Shutdowns: 303 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.4.3-arch1-2] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVT02B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jul 20 13:02:27 2023 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 6131 12 Power_Cycle_Count -O--CK 099 099 000 - 525 177 Wear_Leveling_Count PO--C- 099 099 000 - 9 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 064 043 000 - 36 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 31 241 Total_LBAs_Written -O--CK 099 099 000 - 6837124471 252 Unknown_Attribute -O--CK 100 100 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 31/40 Celsius Lifetime Min/Max Temperature: 26/57 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (99) Index Estimated Time Temperature Celsius 100 2023-07-19 15:50 34 *************** ... ..( 3 skipped). .. *************** 104 2023-07-19 16:30 34 *************** 105 2023-07-19 16:40 33 ************** 106 2023-07-19 16:50 34 *************** 107 2023-07-19 17:00 33 ************** ... ..( 9 skipped). .. ************** 117 2023-07-19 18:40 33 ************** 118 2023-07-19 18:50 ? - 119 2023-07-19 19:00 31 ************ 120 2023-07-19 19:10 33 ************** 121 2023-07-19 19:20 34 *************** 122 2023-07-19 19:30 35 **************** ... ..( 2 skipped). .. **************** 125 2023-07-19 20:00 35 **************** 126 2023-07-19 20:10 36 ***************** 127 2023-07-19 20:20 36 ***************** 0 2023-07-19 20:30 35 **************** 1 2023-07-19 20:40 36 ***************** ... ..( 12 skipped). .. ***************** 14 2023-07-19 22:50 36 ***************** 15 2023-07-19 23:00 37 ****************** 16 2023-07-19 23:10 37 ****************** 17 2023-07-19 23:20 36 ***************** 18 2023-07-19 23:30 37 ****************** 19 2023-07-19 23:40 36 ***************** 20 2023-07-19 23:50 36 ***************** 21 2023-07-20 00:00 37 ****************** 22 2023-07-20 00:10 37 ****************** 23 2023-07-20 00:20 36 ***************** 24 2023-07-20 00:30 36 ***************** 25 2023-07-20 00:40 37 ****************** 26 2023-07-20 00:50 37 ****************** 27 2023-07-20 01:00 36 ***************** 28 2023-07-20 01:10 35 **************** 29 2023-07-20 01:20 35 **************** 30 2023-07-20 01:30 35 **************** 31 2023-07-20 01:40 34 *************** ... ..( 2 skipped). .. *************** 34 2023-07-20 02:10 34 *************** 35 2023-07-20 02:20 33 ************** 36 2023-07-20 02:30 34 *************** ... ..( 6 skipped). .. *************** 43 2023-07-20 03:40 34 *************** 44 2023-07-20 03:50 33 ************** 45 2023-07-20 04:00 34 *************** ... ..( 2 skipped). .. *************** 48 2023-07-20 04:30 34 *************** 49 2023-07-20 04:40 33 ************** ... ..( 22 skipped). .. ************** 72 2023-07-20 08:30 33 ************** 73 2023-07-20 08:40 32 ************* ... ..( 12 skipped). .. ************* 86 2023-07-20 10:50 32 ************* 87 2023-07-20 11:00 33 ************** 88 2023-07-20 11:10 ? - 89 2023-07-20 11:20 31 ************ 90 2023-07-20 11:30 32 ************* 91 2023-07-20 11:40 34 *************** 92 2023-07-20 11:50 35 **************** ... ..( 6 skipped). .. **************** 99 2023-07-20 13:00 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 525 --- Lifetime Power-On Resets 0x01 0x010 4 6131 --- Power-on Hours 0x01 0x018 6 6837124471 --- Logical Sectors Written 0x01 0x020 6 70884697 --- Number of Write Commands 0x01 0x028 6 18294289898 --- Logical Sectors Read 0x01 0x030 6 144419171 --- Number of Read Commands 0x01 0x038 6 1425000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 36 --- Current Temperature 0x05 0x020 1 57 --- Highest Temperature 0x05 0x028 1 26 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 4321 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 117 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 22 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.4.3-arch1-2] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Black Device Model: WDC WD1003FZEX-00K3CA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jul 20 13:02:27 2023 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11100) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 115) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 172 172 021 - 2366 4 Start_Stop_Count -O--CK 091 091 000 - 9823 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 051 051 000 - 36197 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4953 192 Power-Off_Retract_Count -O--CK 200 200 000 - 617 193 Load_Cycle_Count -O--CK 185 185 000 - 46763 194 Temperature_Celsius -O---K 101 090 000 - 42 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 35432 - # 2 Short offline Completed without error 00% 31247 - # 3 Short offline Completed without error 00% 31247 - # 4 Short offline Completed without error 00% 13039 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 43 Celsius Power Cycle Min/Max Temperature: 31/43 Celsius Lifetime Min/Max Temperature: 26/53 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (461) Index Estimated Time Temperature Celsius 462 2023-07-20 05:05 38 ******************* ... ..( 51 skipped). .. ******************* 36 2023-07-20 05:57 38 ******************* 37 2023-07-20 05:58 39 ******************** ... ..( 44 skipped). .. ******************** 82 2023-07-20 06:43 39 ******************** 83 2023-07-20 06:44 38 ******************* 84 2023-07-20 06:45 38 ******************* 85 2023-07-20 06:46 38 ******************* 86 2023-07-20 06:47 ? - 87 2023-07-20 06:48 31 ************ 88 2023-07-20 06:49 31 ************ 89 2023-07-20 06:50 31 ************ 90 2023-07-20 06:51 32 ************* 91 2023-07-20 06:52 32 ************* 92 2023-07-20 06:53 33 ************** 93 2023-07-20 06:54 33 ************** 94 2023-07-20 06:55 35 **************** 95 2023-07-20 06:56 35 **************** 96 2023-07-20 06:57 35 **************** 97 2023-07-20 06:58 36 ***************** 98 2023-07-20 06:59 36 ***************** 99 2023-07-20 07:00 36 ***************** 100 2023-07-20 07:01 37 ****************** 101 2023-07-20 07:02 36 ***************** 102 2023-07-20 07:03 37 ****************** 103 2023-07-20 07:04 37 ****************** 104 2023-07-20 07:05 37 ****************** 105 2023-07-20 07:06 38 ******************* 106 2023-07-20 07:07 38 ******************* 107 2023-07-20 07:08 38 ******************* 108 2023-07-20 07:09 39 ******************** 109 2023-07-20 07:10 39 ******************** 110 2023-07-20 07:11 39 ******************** 111 2023-07-20 07:12 40 ********************* 112 2023-07-20 07:13 40 ********************* 113 2023-07-20 07:14 40 ********************* 114 2023-07-20 07:15 41 ********************** ... ..( 3 skipped). .. ********************** 118 2023-07-20 07:19 41 ********************** 119 2023-07-20 07:20 42 *********************** ... ..( 10 skipped). .. *********************** 130 2023-07-20 07:31 42 *********************** 131 2023-07-20 07:32 43 ************************ ... ..( 7 skipped). .. ************************ 139 2023-07-20 07:40 43 ************************ 140 2023-07-20 07:41 42 *********************** ... ..( 51 skipped). .. *********************** 192 2023-07-20 08:33 42 *********************** 193 2023-07-20 08:34 43 ************************ 194 2023-07-20 08:35 42 *********************** 195 2023-07-20 08:36 43 ************************ ... ..( 3 skipped). .. ************************ 199 2023-07-20 08:40 43 ************************ 200 2023-07-20 08:41 39 ******************** ... ..(252 skipped). .. ******************** 453 2023-07-20 12:54 39 ******************** 454 2023-07-20 12:55 38 ******************* ... ..( 6 skipped). .. ******************* 461 2023-07-20 13:02 38 ******************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 16 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 39 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 7102 Vendor specific