/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.1-desktop-1omv2490] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar P7K500 Device Model: Hitachi HDP725032GLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GM3OA52A User Capacity: 320,071,851,520 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Jan 17 22:47:11 2025 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5908) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 98) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 128 128 054 - 160 3 Spin_Up_Time POS--- 115 115 024 - 342 (Average 325) 4 Start_Stop_Count -O--C- 100 100 000 - 3709 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 131 131 020 - 29 9 Power_On_Hours -O--C- 099 099 000 - 11512 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 3575 192 Power-Off_Retract_Count -O--CK 097 097 000 - 3717 193 Load_Cycle_Count -O--C- 097 097 000 - 3717 194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 1/46) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 22 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 21/37 Celsius Lifetime Min/Max Temperature: 1/46 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (100) Index Estimated Time Temperature Celsius 101 2025-01-17 20:40 37 ****************** 102 2025-01-17 20:41 37 ****************** 103 2025-01-17 20:42 37 ****************** 104 2025-01-17 20:43 36 ***************** 105 2025-01-17 20:44 36 ***************** 106 2025-01-17 20:45 37 ****************** 107 2025-01-17 20:46 36 ***************** ... ..( 10 skipped). .. ***************** 118 2025-01-17 20:57 36 ***************** 119 2025-01-17 20:58 37 ****************** 120 2025-01-17 20:59 37 ****************** 121 2025-01-17 21:00 37 ****************** 122 2025-01-17 21:01 36 ***************** ... ..( 4 skipped). .. ***************** 127 2025-01-17 21:06 36 ***************** 0 2025-01-17 21:07 37 ****************** 1 2025-01-17 21:08 36 ***************** 2 2025-01-17 21:09 36 ***************** 3 2025-01-17 21:10 37 ****************** ... ..( 7 skipped). .. ****************** 11 2025-01-17 21:18 37 ****************** 12 2025-01-17 21:19 36 ***************** ... ..( 4 skipped). .. ***************** 17 2025-01-17 21:24 36 ***************** 18 2025-01-17 21:25 35 **************** ... ..( 8 skipped). .. **************** 27 2025-01-17 21:34 35 **************** 28 2025-01-17 21:35 34 *************** ... ..( 7 skipped). .. *************** 36 2025-01-17 21:43 34 *************** 37 2025-01-17 21:44 35 **************** 38 2025-01-17 21:45 34 *************** ... ..( 27 skipped). .. *************** 66 2025-01-17 22:13 34 *************** 67 2025-01-17 22:14 35 **************** ... ..( 7 skipped). .. **************** 75 2025-01-17 22:22 35 **************** 76 2025-01-17 22:23 34 *************** ... ..( 23 skipped). .. *************** 100 2025-01-17 22:47 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 92 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS