/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.2.0-35-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA A100 Serial Number: -- LU WWN Device Id: 5 00080d ... Firmware Version: SBFA10.1 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Oct 26 11:15:46 2023 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 9 Power_On_Hours -O--C- 100 100 000 - 6035 12 Power_Cycle_Count -O--C- 100 100 000 - 56730 167 Unknown_Attribute -O---K 100 100 000 - 0 168 Unknown_Attribute -O--C- 100 100 000 - 0 169 Unknown_Attribute PO---- 100 100 010 - 0 173 Unknown_Attribute -O--C- 173 173 000 - 0 192 Power-Off_Retract_Count -O--C- 100 100 000 - 161 194 Temperature_Celsius PO---K 074 064 020 - 26 (Min/Max 11/36) ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 654 (device log contains only the most recent 256 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 654 [141] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 d5 e8 10 e3 08 Error: UNC 8 sectors at LBA = 0x03d5e810 = 64350224 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 d5 e8 10 e3 08 00:00:00.000 READ DMA 47 00 00 00 01 00 00 00 00 08 30 a0 08 00:00:00.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 30 a0 08 00:00:00.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 00 a0 08 00:00:00.000 READ LOG DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.000 SET FEATURES [Enable SATA feature] Error 653 [140] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 d5 e8 10 e3 08 Error: UNC 8 sectors at LBA = 0x03d5e810 = 64350224 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 d5 e8 10 e3 08 00:00:00.000 READ DMA 47 00 00 00 01 00 00 00 00 08 30 a0 08 00:00:00.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 30 a0 08 00:00:00.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 00 a0 08 00:00:00.000 READ LOG DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.000 SET FEATURES [Enable SATA feature] Error 652 [139] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 d5 e8 10 e3 08 Error: UNC 8 sectors at LBA = 0x03d5e810 = 64350224 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 d5 e8 10 e3 08 00:00:00.000 READ DMA c8 00 00 00 08 00 00 00 d5 e8 08 e3 08 00:00:00.000 READ DMA c8 00 00 00 08 00 00 00 d5 e8 00 e3 08 00:00:00.000 READ DMA 47 00 00 00 01 00 00 00 00 08 30 a0 08 00:00:00.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 30 a0 08 00:00:00.000 READ LOG DMA EXT Error 651 [138] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 40 00 00 00 d5 e8 00 e3 08 Error: UNC 64 sectors at LBA = 0x03d5e800 = 64350208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 40 00 00 00 d5 e8 00 e3 08 00:00:00.000 READ DMA c8 00 00 00 40 00 00 00 f6 db 40 e1 08 00:00:00.000 READ DMA c8 00 00 00 40 00 00 00 b2 59 c0 e5 08 00:00:00.000 READ DMA c8 00 00 00 40 00 00 00 20 e9 40 e0 08 00:00:00.000 READ DMA c8 00 00 00 40 00 00 00 d5 fa 80 e3 08 00:00:00.000 READ DMA Error 650 [137] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 06 00 00 00 d5 eb 9a e3 08 Error: UNC 6 sectors at LBA = 0x03d5eb9a = 64351130 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 06 00 00 00 d5 eb 9a e3 08 00:00:00.000 READ DMA 47 00 00 00 01 00 00 00 00 08 30 a0 08 00:00:00.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 30 a0 08 00:00:00.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 00 a0 08 00:00:00.000 READ LOG DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.000 SET FEATURES [Enable SATA feature] Error 649 [136] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 d5 eb 99 e3 08 Error: UNC 1 sectors at LBA = 0x03d5eb99 = 64351129 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 01 00 00 00 d5 eb 99 e3 08 00:00:00.000 READ DMA 47 00 00 00 01 00 00 00 00 08 30 a0 08 00:00:00.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 30 a0 08 00:00:00.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 00 a0 08 00:00:00.000 READ LOG DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.000 SET FEATURES [Enable SATA feature] Error 648 [135] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 d5 eb 98 e3 08 Error: UNC 1 sectors at LBA = 0x03d5eb98 = 64351128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 01 00 00 00 d5 eb 98 e3 08 00:00:00.000 READ DMA c8 00 00 00 08 00 00 00 b2 5f 20 e5 08 00:00:00.000 READ DMA c8 00 00 00 08 00 00 00 b2 5f 18 e5 08 00:00:00.000 READ DMA c8 00 00 00 08 00 00 00 b2 5f 10 e5 08 00:00:00.000 READ DMA c8 00 00 00 08 00 00 00 b2 5f 08 e5 08 00:00:00.000 READ DMA Error 647 [134] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 06 00 00 00 d5 f2 f2 e3 08 Error: UNC 6 sectors at LBA = 0x03d5f2f2 = 64353010 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 06 00 00 00 d5 f2 f2 e3 08 00:00:00.000 READ DMA 47 00 00 00 01 00 00 00 00 08 30 a0 08 00:00:00.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 30 a0 08 00:00:00.000 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 00 a0 08 00:00:00.000 READ LOG DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.000 SET FEATURES [Enable SATA feature] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 56730 --- Lifetime Power-On Resets 0x01 0x010 4 6035 --- Power-on Hours 0x01 0x018 6 80345907852 --- Logical Sectors Written 0x01 0x028 6 8579798814 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 707 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 26 --- Current Temperature 0x05 0x020 1 36 --- Highest Temperature 0x05 0x028 1 11 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 19 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 7 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC