Probe #dbcc1fa778 of ASUSTek PRIME B350M-A Desktop Computer

Log: smartctl

/dev/nvme0n1 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.8-100.fc30.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 960 EVO 500GB Serial Number: -- Firmware Version: 3B7QCXE7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 2 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Utilization: 307,503,325,184 [307 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Mon Mar 16 18:47:59 2020 CET Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0007): Security Format Frmw_DL Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 83 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.04W - - 0 0 0 0 0 0 1 + 5.09W - - 1 1 1 1 0 0 2 + 4.08W - - 2 2 2 2 0 0 3 - 0.0400W - - 3 3 3 3 210 1500 4 - 0.0050W - - 4 4 4 4 2200 6000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 35 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 8,912,938 [4.56 TB] Data Units Written: 5,462,858 [2.79 TB] Host Read Commands: 141,196,667 Host Write Commands: 71,277,081 Controller Busy Time: 351 Power Cycles: 1,787 Power On Hours: 1,524 Unsafe Shutdowns: 176 Media and Data Integrity Errors: 0 Error Information Log Entries: 1 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 35 Celsius Temperature Sensor 2: 52 Celsius Error Information (NVMe Log 0x01, max 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 1 0 0x0002 0x4004 0x028 0 0 - /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.8-100.fc30.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 2TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT03B6Q User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Mar 16 18:47:59 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 160) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 779 12 Power_Cycle_Count -O--CK 099 099 000 - 869 177 Wear_Leveling_Count PO--C- 099 099 000 - 1 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 074 048 000 - 26 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 79 241 Total_LBAs_Written -O--CK 099 099 000 - 5257291875 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 22/28 Celsius Lifetime Min/Max Temperature: 23/51 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (83) Index Estimated Time Temperature Celsius 84 2020-03-15 21:30 26 ******* 85 2020-03-15 21:40 28 ********* ... ..( 2 skipped). .. ********* 88 2020-03-15 22:10 28 ********* 89 2020-03-15 22:20 ? - 90 2020-03-15 22:30 ? - 91 2020-03-15 22:40 ? - 92 2020-03-15 22:50 23 **** 93 2020-03-15 23:00 24 ***** 94 2020-03-15 23:10 24 ***** 95 2020-03-15 23:20 24 ***** 96 2020-03-15 23:30 25 ****** 97 2020-03-15 23:40 ? - 98 2020-03-15 23:50 ? - 99 2020-03-16 00:00 24 ***** 100 2020-03-16 00:10 25 ****** 101 2020-03-16 00:20 25 ****** 102 2020-03-16 00:30 27 ******** 103 2020-03-16 00:40 28 ********* ... ..( 2 skipped). .. ********* 106 2020-03-16 01:10 28 ********* 107 2020-03-16 01:20 29 ********** ... ..( 7 skipped). .. ********** 115 2020-03-16 02:40 29 ********** 116 2020-03-16 02:50 27 ******** 117 2020-03-16 03:00 27 ******** 118 2020-03-16 03:10 28 ********* 119 2020-03-16 03:20 26 ******* 120 2020-03-16 03:30 29 ********** 121 2020-03-16 03:40 29 ********** 122 2020-03-16 03:50 28 ********* 123 2020-03-16 04:00 27 ******** 124 2020-03-16 04:10 27 ******** 125 2020-03-16 04:20 27 ******** 126 2020-03-16 04:30 26 ******* 127 2020-03-16 04:40 ? - 0 2020-03-16 04:50 25 ****** 1 2020-03-16 05:00 25 ****** 2 2020-03-16 05:10 25 ****** 3 2020-03-16 05:20 ? - 4 2020-03-16 05:30 ? - 5 2020-03-16 05:40 24 ***** 6 2020-03-16 05:50 24 ***** 7 2020-03-16 06:00 ? - 8 2020-03-16 06:10 24 ***** 9 2020-03-16 06:20 25 ****** 10 2020-03-16 06:30 25 ****** 11 2020-03-16 06:40 26 ******* 12 2020-03-16 06:50 28 ********* 13 2020-03-16 07:00 29 ********** ... ..( 2 skipped). .. ********** 16 2020-03-16 07:30 29 ********** 17 2020-03-16 07:40 27 ******** 18 2020-03-16 07:50 27 ******** 19 2020-03-16 08:00 27 ******** 20 2020-03-16 08:10 ? - 21 2020-03-16 08:20 25 ****** 22 2020-03-16 08:30 25 ****** 23 2020-03-16 08:40 26 ******* 24 2020-03-16 08:50 28 ********* 25 2020-03-16 09:00 26 ******* 26 2020-03-16 09:10 26 ******* 27 2020-03-16 09:20 ? - 28 2020-03-16 09:30 24 ***** 29 2020-03-16 09:40 25 ****** 30 2020-03-16 09:50 ? - 31 2020-03-16 10:00 23 **** 32 2020-03-16 10:10 24 ***** 33 2020-03-16 10:20 25 ****** ... ..( 2 skipped). .. ****** 36 2020-03-16 10:50 25 ****** 37 2020-03-16 11:00 26 ******* 38 2020-03-16 11:10 26 ******* 39 2020-03-16 11:20 29 ********** 40 2020-03-16 11:30 30 *********** 41 2020-03-16 11:40 ? - 42 2020-03-16 11:50 28 ********* 43 2020-03-16 12:00 ? - 44 2020-03-16 12:10 24 ***** 45 2020-03-16 12:20 24 ***** 46 2020-03-16 12:30 25 ****** 47 2020-03-16 12:40 25 ****** 48 2020-03-16 12:50 25 ****** 49 2020-03-16 13:00 ? - 50 2020-03-16 13:10 26 ******* 51 2020-03-16 13:20 26 ******* 52 2020-03-16 13:30 28 ********* 53 2020-03-16 13:40 29 ********** 54 2020-03-16 13:50 29 ********** 55 2020-03-16 14:00 ? - 56 2020-03-16 14:10 24 ***** 57 2020-03-16 14:20 25 ****** 58 2020-03-16 14:30 25 ****** 59 2020-03-16 14:40 26 ******* ... ..( 7 skipped). .. ******* 67 2020-03-16 16:00 26 ******* 68 2020-03-16 16:10 27 ******** 69 2020-03-16 16:20 28 ********* ... ..( 2 skipped). .. ********* 72 2020-03-16 16:50 28 ********* 73 2020-03-16 17:00 27 ******** 74 2020-03-16 17:10 27 ******** 75 2020-03-16 17:20 27 ******** 76 2020-03-16 17:30 26 ******* ... ..( 2 skipped). .. ******* 79 2020-03-16 18:00 26 ******* 80 2020-03-16 18:10 27 ******** 81 2020-03-16 18:20 26 ******* 82 2020-03-16 18:30 26 ******* 83 2020-03-16 18:40 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 869 --- Lifetime Power-On Resets 0x01 0x010 4 779 --- Power-on Hours 0x01 0x018 6 5257291875 --- Logical Sectors Written 0x01 0x020 6 36198609 --- Number of Write Commands 0x01 0x028 6 2759397187 --- Logical Sectors Read 0x01 0x030 6 46310502 --- Number of Read Commands 0x01 0x038 6 3475000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 98 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 26 --- Current Temperature 0x05 0x020 1 51 --- Highest Temperature 0x05 0x028 1 23 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1446 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub