Probe #dc9766965e of Dell Precision M6600

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar Z5K500 Device Model: HGST HTS545050A7E680 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GG2OAH10 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jul 1 16:56:39 2020 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 114) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 2 Throughput_Performance P-S--K 198 100 040 - 124 3 Spin_Up_Time PO---K 253 100 033 - 1 4 Start_Stop_Count -O--CK 099 099 000 - 1976 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 107 097 040 - 37 9 Power_On_Hours -O--CK 097 097 000 - 1320 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1929 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 098 000 - 720898 188 Command_Timeout -O--CK 100 099 000 - 34360328193 190 Airflow_Temperature_Cel -O---K 057 052 045 - 43 (Min/Max 41/43) 191 G-Sense_Error_Rate -O--CK 098 098 000 - 573 192 Power-Off_Retract_Count -O--CK 098 098 000 - 29229502 193 Load_Cycle_Count -O--CK 094 094 000 - 68008 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 979 hours (40 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 68 00 00 3a 38 5f 88 0a 00 Error: WP at LBA = 0x3a385f88 = 976773000 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 02 b8 00 88 00 00 3a 38 5f 38 4a 00 00:02:21.485 WRITE FPDMA QUEUED 61 05 40 00 80 00 00 00 00 31 10 40 00 00:02:21.485 WRITE FPDMA QUEUED 61 02 c0 00 58 00 00 00 00 2e 50 40 00 00:02:21.485 WRITE FPDMA QUEUED 61 05 40 00 50 00 00 00 00 29 10 40 00 00:02:21.485 WRITE FPDMA QUEUED 60 00 08 00 78 00 00 3a 38 5f f8 40 00 00:02:21.481 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 979 hours (40 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 0a 00 00 00 0b f4 08 00 0b 00 Error: WP at LBA = 0x0bf40800 = 200542208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 05 40 00 58 00 00 0c 19 83 80 40 00 00:09:36.350 WRITE FPDMA QUEUED 61 05 40 00 50 00 00 0c 19 7e 40 40 00 00:09:36.342 WRITE FPDMA QUEUED 61 05 40 00 48 00 00 0c 19 79 00 40 00 00:09:36.336 WRITE FPDMA QUEUED 61 05 40 00 40 00 00 0c 19 73 c0 40 00 00:09:36.328 WRITE FPDMA QUEUED 61 05 40 00 38 00 00 0c 19 6e 80 40 00 00:09:36.319 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1291 - # 2 Short offline Completed without error 00% 1286 - # 3 Short offline Completed without error 00% 1264 - # 4 Extended offline Completed without error 00% 1194 - # 5 Short offline Completed without error 00% 1192 - # 6 Short offline Completed without error 00% 1024 - # 7 Short offline Aborted by host 50% 1024 - # 8 Short offline Completed without error 00% 999 - # 9 Short offline Completed without error 00% 976 - #10 Short offline Completed without error 00% 947 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 43 Celsius Power Cycle Min/Max Temperature: 41/43 Celsius Lifetime Min/Max Temperature: 8/48 Celsius Specified Max Operating Temperature: 33 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (58) Index Estimated Time Temperature Celsius 59 2020-07-01 14:49 41 ********************** ... ..( 18 skipped). .. ********************** 78 2020-07-01 15:08 41 ********************** 79 2020-07-01 15:09 42 *********************** ... ..( 7 skipped). .. *********************** 87 2020-07-01 15:17 42 *********************** 88 2020-07-01 15:18 41 ********************** 89 2020-07-01 15:19 42 *********************** 90 2020-07-01 15:20 ? - 91 2020-07-01 15:21 32 ************* 92 2020-07-01 15:22 ? - 93 2020-07-01 15:23 ? - 94 2020-07-01 15:24 40 ********************* 95 2020-07-01 15:25 41 ********************** 96 2020-07-01 15:26 41 ********************** 97 2020-07-01 15:27 42 *********************** ... ..( 11 skipped). .. *********************** 109 2020-07-01 15:39 42 *********************** 110 2020-07-01 15:40 41 ********************** ... ..( 6 skipped). .. ********************** 117 2020-07-01 15:47 41 ********************** 118 2020-07-01 15:48 40 ********************* ... ..( 6 skipped). .. ********************* 125 2020-07-01 15:55 40 ********************* 126 2020-07-01 15:56 39 ******************** 127 2020-07-01 15:57 40 ********************* 0 2020-07-01 15:58 40 ********************* 1 2020-07-01 15:59 40 ********************* 2 2020-07-01 16:00 39 ******************** 3 2020-07-01 16:01 40 ********************* 4 2020-07-01 16:02 39 ******************** 5 2020-07-01 16:03 40 ********************* 6 2020-07-01 16:04 40 ********************* 7 2020-07-01 16:05 40 ********************* 8 2020-07-01 16:06 41 ********************** 9 2020-07-01 16:07 41 ********************** 10 2020-07-01 16:08 41 ********************** 11 2020-07-01 16:09 42 *********************** ... ..( 2 skipped). .. *********************** 14 2020-07-01 16:12 42 *********************** 15 2020-07-01 16:13 43 ************************ ... ..( 3 skipped). .. ************************ 19 2020-07-01 16:17 43 ************************ 20 2020-07-01 16:18 44 ************************* 21 2020-07-01 16:19 44 ************************* 22 2020-07-01 16:20 43 ************************ 23 2020-07-01 16:21 44 ************************* 24 2020-07-01 16:22 43 ************************ ... ..( 4 skipped). .. ************************ 29 2020-07-01 16:27 43 ************************ 30 2020-07-01 16:28 42 *********************** ... ..( 5 skipped). .. *********************** 36 2020-07-01 16:34 42 *********************** 37 2020-07-01 16:35 41 ********************** ... ..( 8 skipped). .. ********************** 46 2020-07-01 16:44 41 ********************** 47 2020-07-01 16:45 ? - 48 2020-07-01 16:46 41 ********************** ... ..( 2 skipped). .. ********************** 51 2020-07-01 16:49 41 ********************** 52 2020-07-01 16:50 42 *********************** ... ..( 4 skipped). .. *********************** 57 2020-07-01 16:55 42 *********************** 58 2020-07-01 16:56 43 ************************ SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD1600BEVT-60ZCT1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 13.01A13 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Wed Jul 1 16:56:40 2020 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4980) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 61) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 14 3 Spin_Up_Time POS--K 159 158 021 - 1016 4 Start_Stop_Count -O--CK 096 096 000 - 4513 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-K 100 253 051 - 0 9 Power_On_Hours -O--CK 092 092 000 - 5873 10 Spin_Retry_Count PO--CK 100 099 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4066 187 Reported_Uncorrect -O--CK 100 094 000 - 6 188 Command_Timeout -O--CK 100 096 000 - 12885098539 190 Airflow_Temperature_Cel -O---K 056 027 040 Past 44 192 Power-Off_Retract_Count -O--CK 200 200 000 - 697 193 Load_Cycle_Count -O--CK 179 179 000 - 64349 194 Temperature_Celsius -O---K 099 070 000 - 44 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 7 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7 [6] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 5e 61 ea f6 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 08 68 58 00 00 ea 58 00 f6 61 00 00 08 00:00:00.112 DEVICE RESET 00 42 61 ea f6 00 60 08 00 c0 00 00 00 04:16:38.479 NOP [Reserved subcommand] [OBS-ACS-2] 08 50 20 00 00 ea 37 00 f6 61 00 00 08 00:00:00.088 DEVICE RESET Error 6 [5] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 78 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 05 29 00 de 00 00 00 00 00 00 00 02 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 78 ff 00 f8 00 6c 02 d0 25 00 00 00 00:01:03.608 NOP [Reserved subcommand] [OBS-ACS-2] 02 be 25 00 b6 00 78 00 f8 ff 00 00 02 00:00:50.075 [RESERVED] 00 78 ff 00 f8 00 68 02 a9 29 00 00 00 00:01:03.608 NOP [Reserved subcommand] [OBS-ACS-2] Error 5 [4] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 78 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 6c 25 00 d0 00 00 00 00 00 00 00 02 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 78 ff 00 f8 00 9b 02 c3 29 00 00 00 00:01:03.608 NOP [Reserved subcommand] [OBS-ACS-2] 02 68 29 00 a9 00 78 00 f8 ff 00 00 02 00:00:46.782 [RESERVED] 00 78 ff 00 f8 00 25 02 9b 25 00 00 00 00:01:03.608 NOP [Reserved subcommand] [OBS-ACS-2] Error 4 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 78 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 9b 29 00 c3 00 00 00 00 00 00 00 02 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 78 ff 00 f8 00 be 02 b6 25 00 00 00 00:01:03.608 NOP [Reserved subcommand] [OBS-ACS-2] 02 25 25 00 9b 00 78 00 f8 ff 00 00 02 00:00:43.368 [RESERVED] 00 78 ff 00 80 00 23 02 9b 25 00 00 00 00:01:03.608 NOP [Reserved subcommand] [OBS-ACS-2] Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 78 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 be 25 00 b6 00 00 00 00 00 00 00 02 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 78 ff 00 f8 00 68 02 a9 29 00 00 00 00:01:03.608 NOP [Reserved subcommand] [OBS-ACS-2] 02 23 25 00 9b 00 78 00 f8 ff 00 00 02 00:00:39.717 [RESERVED] 00 78 ff 00 08 00 21 02 9b 25 00 00 00 00:00:32.888 NOP [Reserved subcommand] [OBS-ACS-2] Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 78 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 68 29 00 a9 00 00 00 00 00 00 00 02 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 78 ff 00 f8 00 25 02 9b 25 00 00 00 00:01:03.608 NOP [Reserved subcommand] [OBS-ACS-2] 02 21 25 00 9b 00 78 00 80 ff 00 00 02 00:00:39.715 [RESERVED] 00 78 ff 00 90 00 1f 02 9b 25 00 00 00 00:00:02.168 NOP [Reserved subcommand] [OBS-ACS-2] Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 00 01 78 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 25 25 00 9b 00 00 00 00 00 00 00 02 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 78 ff 00 80 00 23 02 9b 25 00 00 00 00:01:03.608 NOP [Reserved subcommand] [OBS-ACS-2] 02 1f 25 00 9b 00 78 00 08 ff 00 00 02 00:00:39.713 [RESERVED] 00 78 ff 00 18 00 1d 02 9b 25 00 00 00 00:00:36.984 NOP [Reserved subcommand] [OBS-ACS-2] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 90% 5750 - # 2 Short offline Aborted by host 90% 5698 - # 3 Extended offline Aborted by host 90% 5606 - # 4 Short offline Completed without error 00% 5606 - # 5 Extended offline Aborted by host 90% 5556 - # 6 Short offline Completed without error 00% 5556 - # 7 Short offline Aborted by host 90% 5492 - # 8 Extended offline Aborted by host 80% 5489 - # 9 Short offline Completed without error 00% 5489 - #10 Short offline Aborted by host 30% 5486 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 44 Celsius Power Cycle Min/Max Temperature: 42/44 Celsius Lifetime Min/Max Temperature: 24/73 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (52) Index Estimated Time Temperature Celsius 53 2020-07-01 14:49 44 ************************* ... ..( 15 skipped). .. ************************* 69 2020-07-01 15:05 44 ************************* 70 2020-07-01 15:06 ? - 71 2020-07-01 15:07 32 ************* 72 2020-07-01 15:08 32 ************* 73 2020-07-01 15:09 33 ************** 74 2020-07-01 15:10 34 *************** 75 2020-07-01 15:11 35 **************** 76 2020-07-01 15:12 37 ****************** 77 2020-07-01 15:13 37 ****************** 78 2020-07-01 15:14 ? - 79 2020-07-01 15:15 38 ******************* 80 2020-07-01 15:16 ? - 81 2020-07-01 15:17 38 ******************* 82 2020-07-01 15:18 38 ******************* 83 2020-07-01 15:19 39 ******************** 84 2020-07-01 15:20 40 ********************* 85 2020-07-01 15:21 41 ********************** 86 2020-07-01 15:22 41 ********************** 87 2020-07-01 15:23 41 ********************** 88 2020-07-01 15:24 42 *********************** ... ..( 2 skipped). .. *********************** 91 2020-07-01 15:27 42 *********************** 92 2020-07-01 15:28 43 ************************ ... ..( 7 skipped). .. ************************ 100 2020-07-01 15:36 43 ************************ 101 2020-07-01 15:37 42 *********************** ... ..( 20 skipped). .. *********************** 122 2020-07-01 15:58 42 *********************** 123 2020-07-01 15:59 41 ********************** 124 2020-07-01 16:00 41 ********************** 125 2020-07-01 16:01 41 ********************** 126 2020-07-01 16:02 42 *********************** 127 2020-07-01 16:03 42 *********************** 0 2020-07-01 16:04 42 *********************** 1 2020-07-01 16:05 43 ************************ ... ..( 14 skipped). .. ************************ 16 2020-07-01 16:20 43 ************************ 17 2020-07-01 16:21 42 *********************** ... ..( 20 skipped). .. *********************** 38 2020-07-01 16:42 42 *********************** 39 2020-07-01 16:43 43 ************************ 40 2020-07-01 16:44 ? - 41 2020-07-01 16:45 42 *********************** ... ..( 3 skipped). .. *********************** 45 2020-07-01 16:49 42 *********************** 46 2020-07-01 16:50 43 ************************ ... ..( 3 skipped). .. ************************ 50 2020-07-01 16:54 43 ************************ 51 2020-07-01 16:55 44 ************************* 52 2020-07-01 16:56 44 ************************* SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x8000 4 701 Vendor specific


Hardware for Linux and BSD

GitHub