/dev/sda smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.17.3-1-ARCH] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile Device Model: WDC WD5000LPCX-24C6HT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 02.01A02 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Jul 4 14:26:48 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9000) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 104) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 151 146 021 - 1425 4 Start_Stop_Count -O--CK 093 093 000 - 7781 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-K 200 200 051 - 0 9 Power_On_Hours -O--CK 095 095 000 - 4314 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1297 192 Power-Off_Retract_Count -O--CK 200 200 000 - 176 193 Load_Cycle_Count -O--CK 193 193 000 - 23142 194 Temperature_Celsius -O---K 113 097 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 240 Head_Flying_Hours -O--CK 095 095 000 - 3871 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 30/30 Celsius Lifetime Min/Max Temperature: 16/46 Celsius Lifetime Average Temperature: 30 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (124) Index Estimated Time Temperature Celsius 125 2018-07-04 12:19 ? - 126 2018-07-04 12:20 35 **************** 127 2018-07-04 12:21 35 **************** 0 2018-07-04 12:22 ? - 1 2018-07-04 12:23 35 **************** 2 2018-07-04 12:24 35 **************** 3 2018-07-04 12:25 ? - 4 2018-07-04 12:26 35 **************** 5 2018-07-04 12:27 35 **************** 6 2018-07-04 12:28 ? - 7 2018-07-04 12:29 35 **************** 8 2018-07-04 12:30 35 **************** 9 2018-07-04 12:31 ? - 10 2018-07-04 12:32 35 **************** 11 2018-07-04 12:33 35 **************** 12 2018-07-04 12:34 ? - 13 2018-07-04 12:35 35 **************** 14 2018-07-04 12:36 35 **************** 15 2018-07-04 12:37 35 **************** 16 2018-07-04 12:38 ? - 17 2018-07-04 12:39 35 **************** 18 2018-07-04 12:40 35 **************** 19 2018-07-04 12:41 35 **************** 20 2018-07-04 12:42 ? - 21 2018-07-04 12:43 35 **************** 22 2018-07-04 12:44 35 **************** 23 2018-07-04 12:45 ? - 24 2018-07-04 12:46 35 **************** 25 2018-07-04 12:47 35 **************** 26 2018-07-04 12:48 ? - 27 2018-07-04 12:49 35 **************** 28 2018-07-04 12:50 35 **************** 29 2018-07-04 12:51 ? - 30 2018-07-04 12:52 35 **************** 31 2018-07-04 12:53 35 **************** 32 2018-07-04 12:54 ? - 33 2018-07-04 12:55 35 **************** 34 2018-07-04 12:56 35 **************** 35 2018-07-04 12:57 ? - 36 2018-07-04 12:58 35 **************** 37 2018-07-04 12:59 35 **************** 38 2018-07-04 13:00 35 **************** 39 2018-07-04 13:01 ? - 40 2018-07-04 13:02 35 **************** 41 2018-07-04 13:03 35 **************** 42 2018-07-04 13:04 ? - 43 2018-07-04 13:05 35 **************** ... ..( 2 skipped). .. **************** 46 2018-07-04 13:08 35 **************** 47 2018-07-04 13:09 ? - 48 2018-07-04 13:10 35 **************** ... ..( 3 skipped). .. **************** 52 2018-07-04 13:14 35 **************** 53 2018-07-04 13:15 36 ***************** ... ..( 10 skipped). .. ***************** 64 2018-07-04 13:26 36 ***************** 65 2018-07-04 13:27 37 ****************** 66 2018-07-04 13:28 36 ***************** ... ..( 13 skipped). .. ***************** 80 2018-07-04 13:42 36 ***************** 81 2018-07-04 13:43 ? - 82 2018-07-04 13:44 24 ***** 83 2018-07-04 13:45 25 ****** 84 2018-07-04 13:46 26 ******* 85 2018-07-04 13:47 27 ******** 86 2018-07-04 13:48 27 ******** 87 2018-07-04 13:49 28 ********* 88 2018-07-04 13:50 29 ********** 89 2018-07-04 13:51 30 *********** 90 2018-07-04 13:52 30 *********** 91 2018-07-04 13:53 30 *********** 92 2018-07-04 13:54 31 ************ 93 2018-07-04 13:55 32 ************* 94 2018-07-04 13:56 32 ************* 95 2018-07-04 13:57 33 ************** 96 2018-07-04 13:58 34 *************** ... ..( 5 skipped). .. *************** 102 2018-07-04 14:04 34 *************** 103 2018-07-04 14:05 35 **************** ... ..( 2 skipped). .. **************** 106 2018-07-04 14:08 35 **************** 107 2018-07-04 14:09 36 ***************** ... ..( 2 skipped). .. ***************** 110 2018-07-04 14:12 36 ***************** 111 2018-07-04 14:13 35 **************** ... ..( 6 skipped). .. **************** 118 2018-07-04 14:20 35 **************** 119 2018-07-04 14:21 ? - 120 2018-07-04 14:22 30 *********** 121 2018-07-04 14:23 ? - 122 2018-07-04 14:24 30 *********** 123 2018-07-04 14:25 ? - 124 2018-07-04 14:26 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 151 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 61 Vendor specific