/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-16-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Black Device Model: WDC WD3200BEKT-75PVMT1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Aug 10 04:18:56 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6060) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 63) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 3 Spin_Up_Time POS--K 142 134 021 - 1875 4 Start_Stop_Count -O--CK 096 096 000 - 4141 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 094 094 000 - 4849 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3847 191 G-Sense_Error_Rate -O--CK 001 001 000 - 1287 192 Power-Off_Retract_Count -O--CK 200 200 000 - 616 193 Load_Cycle_Count -O--CK 188 188 000 - 38244 194 Temperature_Celsius -O---K 101 088 000 - 42 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 240 Head_Flying_Hours -O--CK 094 094 000 - 4631 241 Total_LBAs_Written -O--CK 200 200 000 - 40715705414 242 Total_LBAs_Read -O--CK 200 200 000 - 21174254313 254 Free_Fall_Sensor -O--CK 192 192 000 - 8 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 1240 hours (51 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 12 9b a0 9e 40 00 Error: UNC at LBA = 0x129ba09e = 312189086 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 28 00 98 00 00 12 9b a0 b8 40 08 00:00:26.264 READ FPDMA QUEUED 60 00 18 00 90 00 00 12 9b a0 98 40 08 00:00:26.264 READ FPDMA QUEUED 60 00 50 00 88 00 00 12 9b 9e e0 40 08 00:00:26.263 READ FPDMA QUEUED 60 00 40 00 80 00 00 12 9b 9e a0 40 08 00:00:26.262 READ FPDMA QUEUED 60 00 88 00 78 00 00 12 9b 9d b0 40 08 00:00:26.261 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1255 - # 2 Short offline Completed without error 00% 873 - # 3 Short offline Completed without error 00% 587 - # 4 Short offline Completed without error 00% 585 - # 5 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: 38/47 Celsius Lifetime Min/Max Temperature: 0/55 Celsius Specified Max Operating Temperature: 38 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (26) Index Estimated Time Temperature Celsius 27 2022-08-10 02:11 45 ************************** ... ..( 4 skipped). .. ************************** 32 2022-08-10 02:16 45 ************************** 33 2022-08-10 02:17 46 *************************** ... ..( 5 skipped). .. *************************** 39 2022-08-10 02:23 46 *************************** 40 2022-08-10 02:24 47 **************************** ... ..( 11 skipped). .. **************************** 52 2022-08-10 02:36 47 **************************** 53 2022-08-10 02:37 46 *************************** 54 2022-08-10 02:38 45 ************************** 55 2022-08-10 02:39 45 ************************** 56 2022-08-10 02:40 44 ************************* 57 2022-08-10 02:41 43 ************************ ... ..( 3 skipped). .. ************************ 61 2022-08-10 02:45 43 ************************ 62 2022-08-10 02:46 42 *********************** 63 2022-08-10 02:47 42 *********************** 64 2022-08-10 02:48 42 *********************** 65 2022-08-10 02:49 41 ********************** ... ..( 2 skipped). .. ********************** 68 2022-08-10 02:52 41 ********************** 69 2022-08-10 02:53 40 ********************* ... ..( 3 skipped). .. ********************* 73 2022-08-10 02:57 40 ********************* 74 2022-08-10 02:58 39 ******************** ... ..( 2 skipped). .. ******************** 77 2022-08-10 03:01 39 ******************** 78 2022-08-10 03:02 38 ******************* ... ..( 7 skipped). .. ******************* 86 2022-08-10 03:10 38 ******************* 87 2022-08-10 03:11 39 ******************** 88 2022-08-10 03:12 39 ******************** 89 2022-08-10 03:13 40 ********************* 90 2022-08-10 03:14 39 ******************** ... ..( 3 skipped). .. ******************** 94 2022-08-10 03:18 39 ******************** 95 2022-08-10 03:19 38 ******************* ... ..( 16 skipped). .. ******************* 112 2022-08-10 03:36 38 ******************* 113 2022-08-10 03:37 39 ******************** 114 2022-08-10 03:38 39 ******************** 115 2022-08-10 03:39 40 ********************* ... ..( 5 skipped). .. ********************* 121 2022-08-10 03:45 40 ********************* 122 2022-08-10 03:46 41 ********************** ... ..( 16 skipped). .. ********************** 11 2022-08-10 04:03 41 ********************** 12 2022-08-10 04:04 42 *********************** ... ..( 6 skipped). .. *********************** 19 2022-08-10 04:11 42 *********************** 20 2022-08-10 04:12 41 ********************** 21 2022-08-10 04:13 42 *********************** 22 2022-08-10 04:14 42 *********************** 23 2022-08-10 04:15 42 *********************** 24 2022-08-10 04:16 41 ********************** 25 2022-08-10 04:17 42 *********************** 26 2022-08-10 04:18 42 *********************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 12745 Vendor specific /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-16-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org Read Device Identity failed: scsi error unsupported field in scsi command A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.