Probe #e692fe97cb of Gigabyte GA-MA790FXT-UD5P Desktop Computer

Log: smartctl

/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-46-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.C Device Model: Hitachi HDS721010CLA332 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JP4OA39C User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Aug 28 19:54:49 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10458) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 174) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 085 085 016 - 196843 2 Throughput_Performance P-S--- 135 135 054 - 99 3 Spin_Up_Time POS--- 117 117 024 - 324 (Average 325) 4 Start_Stop_Count -O--C- 097 097 000 - 15182 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 3 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 132 132 020 - 34 9 Power_On_Hours -O--C- 099 099 000 - 10360 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 15100 192 Power-Off_Retract_Count -O--CK 088 088 000 - 15193 193 Load_Cycle_Count -O--C- 088 088 000 - 15193 194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 15/53) 196 Reallocated_Event_Count -O--CK 100 100 000 - 3 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 490 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 604 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 604 [3] occurred at disk power-on lifetime: 10360 hours (431 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 03 db 8f 37 00 00 Error: ICRC, ABRT at LBA = 0x03db8f37 = 64720695 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 08 00 00 03 db 8e 37 40 08 03:44:29.984 READ FPDMA QUEUED 60 01 00 00 00 00 00 03 db 8d 37 40 08 03:44:29.968 READ FPDMA QUEUED 60 01 00 00 f8 00 00 03 db 8c 37 40 08 03:44:29.951 READ FPDMA QUEUED 60 01 00 00 b8 00 00 03 db 8b 37 40 08 03:44:29.934 READ FPDMA QUEUED 60 01 00 00 b0 00 00 03 db 8a 37 40 08 03:44:29.918 READ FPDMA QUEUED Error 603 [2] occurred at disk power-on lifetime: 10360 hours (431 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 03 64 19 37 00 00 Error: ICRC, ABRT at LBA = 0x03641937 = 56891703 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 50 00 48 00 00 03 64 18 e7 40 08 03:42:10.966 READ FPDMA QUEUED 60 00 08 00 40 00 00 03 64 18 bf 40 08 03:42:10.966 READ FPDMA QUEUED 60 00 08 00 38 00 00 1f df 77 0f 40 08 03:42:10.965 READ FPDMA QUEUED 60 00 f8 00 30 00 00 03 6c 1a 3f 40 08 03:42:10.961 READ FPDMA QUEUED 60 00 08 00 28 00 00 03 6c 4a 37 40 08 03:42:10.960 READ FPDMA QUEUED Error 602 [1] occurred at disk power-on lifetime: 10360 hours (431 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 d0 00 00 09 c9 46 7f 00 00 Error: ICRC, ABRT at LBA = 0x09c9467f = 164185727 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 08 00 00 09 c9 46 4f 40 08 03:07:53.474 READ FPDMA QUEUED 60 01 00 00 00 00 00 09 c9 45 4f 40 08 03:07:53.472 READ FPDMA QUEUED 60 01 00 00 f8 00 00 09 c9 44 4f 40 08 03:07:53.468 READ FPDMA QUEUED 60 01 00 00 b8 00 00 09 c9 43 4f 40 08 03:07:53.464 READ FPDMA QUEUED 60 01 00 00 b0 00 00 09 c9 42 4f 40 08 03:07:53.460 READ FPDMA QUEUED Error 601 [0] occurred at disk power-on lifetime: 10360 hours (431 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 30 00 00 09 c7 f6 1f 00 00 Error: ICRC, ABRT at LBA = 0x09c7f61f = 164099615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 a8 00 00 09 c7 f5 4f 40 08 03:07:46.933 READ FPDMA QUEUED 60 01 00 00 a0 00 00 09 c7 f4 4f 40 08 03:07:46.927 READ FPDMA QUEUED 60 01 00 00 98 00 00 09 c7 f3 4f 40 08 03:07:46.922 READ FPDMA QUEUED 60 01 00 00 90 00 00 09 c7 f2 4f 40 08 03:07:46.917 READ FPDMA QUEUED 60 01 00 00 88 00 00 09 c7 f1 4f 40 08 03:07:46.904 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1311 - # 2 Short offline Completed without error 00% 693 - # 3 Short offline Completed without error 00% 61 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 24/32 Celsius Lifetime Min/Max Temperature: 15/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (68) Index Estimated Time Temperature Celsius 69 2022-08-28 17:47 38 ******************* ... ..( 7 skipped). .. ******************* 77 2022-08-28 17:55 38 ******************* 78 2022-08-28 17:56 39 ******************** ... ..( 3 skipped). .. ******************** 82 2022-08-28 18:00 39 ******************** 83 2022-08-28 18:01 40 ********************* ... ..( 6 skipped). .. ********************* 90 2022-08-28 18:08 40 ********************* 91 2022-08-28 18:09 41 ********************** ... ..( 9 skipped). .. ********************** 101 2022-08-28 18:19 41 ********************** 102 2022-08-28 18:20 42 *********************** ... ..( 9 skipped). .. *********************** 112 2022-08-28 18:30 42 *********************** 113 2022-08-28 18:31 41 ********************** ... ..( 3 skipped). .. ********************** 117 2022-08-28 18:35 41 ********************** 118 2022-08-28 18:36 40 ********************* ... ..( 3 skipped). .. ********************* 122 2022-08-28 18:40 40 ********************* 123 2022-08-28 18:41 41 ********************** ... ..( 19 skipped). .. ********************** 15 2022-08-28 19:01 41 ********************** 16 2022-08-28 19:02 42 *********************** ... ..( 9 skipped). .. *********************** 26 2022-08-28 19:12 42 *********************** 27 2022-08-28 19:13 43 ************************ ... ..( 3 skipped). .. ************************ 31 2022-08-28 19:17 43 ************************ 32 2022-08-28 19:18 42 *********************** 33 2022-08-28 19:19 43 ************************ ... ..( 7 skipped). .. ************************ 41 2022-08-28 19:27 43 ************************ 42 2022-08-28 19:28 44 ************************* ... ..( 10 skipped). .. ************************* 53 2022-08-28 19:39 44 ************************* 54 2022-08-28 19:40 ? - 55 2022-08-28 19:41 25 ****** 56 2022-08-28 19:42 25 ****** 57 2022-08-28 19:43 26 ******* 58 2022-08-28 19:44 26 ******* 59 2022-08-28 19:45 27 ******** 60 2022-08-28 19:46 28 ********* 61 2022-08-28 19:47 28 ********* 62 2022-08-28 19:48 29 ********** 63 2022-08-28 19:49 29 ********** 64 2022-08-28 19:50 29 ********** 65 2022-08-28 19:51 30 *********** 66 2022-08-28 19:52 31 ************ 67 2022-08-28 19:53 31 ************ 68 2022-08-28 19:54 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 15100 --- Lifetime Power-On Resets 0x01 0x010 4 10360 --- Power-on Hours 0x01 0x018 6 23899294422 --- Logical Sectors Written 0x01 0x020 6 175409556 --- Number of Write Commands 0x01 0x028 6 156575978908 --- Logical Sectors Read 0x01 0x030 6 329145891 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 10304 --- Spindle Motor Power-on Hours 0x03 0x010 4 10304 --- Head Flying Hours 0x03 0x018 4 15193 --- Head Load Events 0x03 0x020 4 3 --- Number of Reallocated Logical Sectors 0x03 0x028 4 7509 --- Read Recovery Attempts 0x03 0x030 4 4294967295 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 16431 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x010 1 34 N-- Average Short Term Temperature 0x05 0x018 1 35 N-- Average Long Term Temperature 0x05 0x020 1 53 --- Highest Temperature 0x05 0x028 1 15 --- Lowest Temperature 0x05 0x030 1 46 N-- Highest Average Short Term Temperature 0x05 0x038 1 0 N-- Lowest Average Short Term Temperature 0x05 0x040 1 43 N-- Highest Average Long Term Temperature 0x05 0x048 1 0 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 158610508 --- Number of Hardware Resets 0x06 0x010 4 26262 --- Number of ASR Events 0x06 0x018 4 490 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 4 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-46-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.C Device Model: Hitachi HDS721050CLA362 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JP2OA39C User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Aug 28 19:54:50 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4978) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 83) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 136 136 054 - 94 3 Spin_Up_Time POS--- 119 119 024 - 191 (Average 195) 4 Start_Stop_Count -O--C- 097 097 000 - 15138 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 132 132 020 - 34 9 Power_On_Hours -O--C- 099 099 000 - 10357 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 15100 192 Power-Off_Retract_Count -O--CK 088 088 000 - 15156 193 Load_Cycle_Count -O--C- 088 088 000 - 15156 194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 14/54) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 20216 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 32973 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 32973 [0] occurred at disk power-on lifetime: 10357 hours (431 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 16 23 29 3d 00 00 Error: ICRC, ABRT at LBA = 0x1623293d = 371403069 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 16 23 29 35 e0 00 49d+01:30:26.998 READ DMA EXT 25 00 00 00 08 00 00 16 1f 29 35 e0 00 49d+01:30:26.948 READ DMA EXT 25 00 00 00 08 00 00 16 1b 29 35 e0 00 49d+01:30:26.903 READ DMA EXT 25 00 00 00 08 00 00 16 17 29 35 e0 00 49d+01:30:26.859 READ DMA EXT 25 00 00 00 08 00 00 16 13 29 35 e0 00 49d+01:30:26.745 READ DMA EXT Error 32972 [3] occurred at disk power-on lifetime: 10346 hours (431 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 30 00 00 0e 9c 1b e5 00 00 Error: ICRC, ABRT 48 sectors at LBA = 0x0e9c1be5 = 245111781 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 70 00 00 00 9c 1b a5 ee 00 46d+10:00:26.375 READ DMA c8 00 00 00 88 00 00 00 9c 1b 15 ee 00 46d+10:00:26.373 READ DMA c8 00 00 00 e0 00 00 00 9c 1a 35 ee 00 46d+10:00:26.218 READ DMA c8 00 00 00 20 00 00 00 9c 2f 15 ee 00 46d+10:00:26.217 READ DMA c8 00 00 00 e0 00 00 00 9c 2e 35 ee 00 46d+10:00:26.124 READ DMA Error 32971 [2] occurred at disk power-on lifetime: 10346 hours (431 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 60 00 00 0e a4 63 b5 00 00 Error: ICRC, ABRT 96 sectors at LBA = 0x0ea463b5 = 245654453 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 00 00 00 00 a4 63 15 ee 00 46d+10:00:19.630 READ DMA c8 00 00 00 00 00 00 00 a4 62 15 ee 00 46d+10:00:19.371 READ DMA c8 00 00 00 e0 00 00 00 a4 61 35 ee 00 46d+10:00:19.085 READ DMA c8 00 00 00 20 00 00 00 a4 60 15 ee 00 46d+10:00:19.084 READ DMA c8 00 00 00 00 00 00 00 a4 5f 15 ee 00 46d+10:00:18.702 READ DMA Error 32970 [1] occurred at disk power-on lifetime: 10346 hours (431 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 d0 00 00 0e b3 5c 85 00 00 Error: ICRC, ABRT 464 sectors at LBA = 0x0eb35c85 = 246635653 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 20 00 00 0e b3 5a 35 ee 00 46d+08:32:01.652 READ DMA EXT 25 00 00 05 20 00 00 0e b3 55 15 e0 00 46d+08:32:01.484 READ DMA EXT 35 00 00 00 08 00 00 24 33 89 7d e4 00 46d+08:31:55.607 WRITE DMA EXT 35 00 00 00 08 00 00 24 33 50 05 e4 00 46d+08:31:55.604 WRITE DMA EXT 35 00 00 00 08 00 00 24 33 2a 25 e4 00 46d+08:31:55.602 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7270 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 24/31 Celsius Lifetime Min/Max Temperature: 14/54 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (97) Index Estimated Time Temperature Celsius 98 2022-08-28 17:47 37 ****************** ... ..( 11 skipped). .. ****************** 110 2022-08-28 17:59 37 ****************** 111 2022-08-28 18:00 38 ******************* ... ..( 11 skipped). .. ******************* 123 2022-08-28 18:12 38 ******************* 124 2022-08-28 18:13 39 ******************** ... ..( 38 skipped). .. ******************** 35 2022-08-28 18:52 39 ******************** 36 2022-08-28 18:53 40 ********************* 37 2022-08-28 18:54 39 ******************** 38 2022-08-28 18:55 40 ********************* 39 2022-08-28 18:56 39 ******************** ... ..( 4 skipped). .. ******************** 44 2022-08-28 19:01 39 ******************** 45 2022-08-28 19:02 40 ********************* ... ..( 17 skipped). .. ********************* 63 2022-08-28 19:20 40 ********************* 64 2022-08-28 19:21 41 ********************** ... ..( 17 skipped). .. ********************** 82 2022-08-28 19:39 41 ********************** 83 2022-08-28 19:40 ? - 84 2022-08-28 19:41 24 ***** 85 2022-08-28 19:42 25 ****** 86 2022-08-28 19:43 26 ******* 87 2022-08-28 19:44 26 ******* 88 2022-08-28 19:45 27 ******** 89 2022-08-28 19:46 28 ********* 90 2022-08-28 19:47 28 ********* 91 2022-08-28 19:48 29 ********** 92 2022-08-28 19:49 29 ********** 93 2022-08-28 19:50 30 *********** 94 2022-08-28 19:51 30 *********** 95 2022-08-28 19:52 30 *********** 96 2022-08-28 19:53 31 ************ 97 2022-08-28 19:54 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 15100 --- Lifetime Power-On Resets 0x01 0x010 4 10357 --- Power-on Hours 0x01 0x018 6 13758869217 --- Logical Sectors Written 0x01 0x020 6 81063324 --- Number of Write Commands 0x01 0x028 6 190331173471 --- Logical Sectors Read 0x01 0x030 6 147406819 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 10330 --- Spindle Motor Power-on Hours 0x03 0x010 4 10330 --- Head Flying Hours 0x03 0x018 4 15156 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 43 --- Read Recovery Attempts 0x03 0x030 4 4 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 12175 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 --- Current Temperature 0x05 0x010 1 33 N-- Average Short Term Temperature 0x05 0x018 1 34 N-- Average Long Term Temperature 0x05 0x020 1 54 --- Highest Temperature 0x05 0x028 1 14 --- Lowest Temperature 0x05 0x030 1 46 N-- Highest Average Short Term Temperature 0x05 0x038 1 0 N-- Lowest Average Short Term Temperature 0x05 0x040 1 44 N-- Highest Average Long Term Temperature 0x05 0x048 1 0 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 22413 --- Number of Hardware Resets 0x06 0x010 4 7314 --- Number of ASR Events 0x06 0x018 4 20216 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-46-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Mobile HDD Device Model: ST2000LM007-1R8174 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SBK2 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Aug 28 19:54:52 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 331) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 082 055 006 - 148052573 3 Spin_Up_Time PO---- 099 097 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 211 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 066 060 045 - 4421853 9 Power_On_Hours -O--CK 095 095 000 - 4810 (72 122 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 65 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 098 098 000 - 2 188 Command_Timeout -O--CK 100 099 000 - 4295032834 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 073 054 040 - 27 (Min/Max 25/36) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 1 192 Power-Off_Retract_Count -O--CK 100 100 000 - 12 193 Load_Cycle_Count -O--CK 100 100 000 - 635 194 Temperature_Celsius -O---K 027 046 000 - 27 (0 16 0 0 0) 197 Current_Pending_Sector -O--C- 100 099 000 - 0 198 Offline_Uncorrectable ----C- 100 099 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 62 (127 156 0) 241 Total_LBAs_Written ------ 100 253 000 - 2256715445 242 Total_LBAs_Read ------ 100 253 000 - 1065481814 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa8 GPL,SL VS 136 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 8920 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc2 GPL,SL VS 240 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 24 Device vendor specific log 0xc9 GPL,SL VS 1 Device vendor specific log 0xca GPL,SL VS 16 Device vendor specific log 0xd3 GPL VS 1920 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 654 hours (27 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 04 9a 4d 50 00 00 Error: UNC at LBA = 0x049a4d50 = 77221200 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 03 00 f0 00 00 04 9a 4c e0 40 00 00:24:44.195 READ DMA EXT 25 00 03 00 10 00 00 04 9a 4c d0 40 00 00:24:44.193 READ DMA EXT 25 00 03 00 f0 00 00 04 9a 4b e0 40 00 00:24:44.189 READ DMA EXT 25 00 03 00 10 00 00 04 9a 4b d0 40 00 00:24:44.189 READ DMA EXT 25 00 03 00 f0 00 00 04 9a 4a e0 40 00 00:24:44.185 READ DMA EXT Error 1 [0] occurred at disk power-on lifetime: 654 hours (27 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 f6 d0 68 00 00 Error: UNC at LBA = 0x03f6d068 = 66506856 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 da 00 f0 00 00 03 f6 d0 58 40 00 00:18:29.028 READ DMA EXT 25 00 da 00 10 00 00 03 f6 d0 48 40 00 00:18:29.027 READ DMA EXT 25 00 da 00 f0 00 00 03 f6 cf 58 40 00 00:18:29.023 READ DMA EXT 25 00 da 00 10 00 00 03 f6 cf 48 40 00 00:18:29.023 READ DMA EXT 25 00 da 00 f0 00 00 03 f6 ce 58 40 00 00:18:29.019 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 25/36 Celsius Lifetime Min/Max Temperature: 16/49 Celsius Specified Max Operating Temperature: 35 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 30 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (73) Index Estimated Time Temperature Celsius 74 2022-08-26 04:00 38 ******************* 75 2022-08-26 04:30 39 ******************** 76 2022-08-26 05:00 39 ******************** 77 2022-08-26 05:30 ? - 78 2022-08-26 06:00 29 ********** 79 2022-08-26 06:30 ? - 80 2022-08-26 07:00 20 * 81 2022-08-26 07:30 ? - 82 2022-08-26 08:00 18 - 83 2022-08-26 08:30 ? - 84 2022-08-26 09:00 21 ** 85 2022-08-26 09:30 ? - 86 2022-08-26 10:00 20 * 87 2022-08-26 10:30 ? - 88 2022-08-26 11:00 23 **** 89 2022-08-26 11:30 ? - 90 2022-08-26 12:00 19 - 91 2022-08-26 12:30 20 * 92 2022-08-26 13:00 21 ** 93 2022-08-26 13:30 34 *************** 94 2022-08-26 14:00 33 ************** 95 2022-08-26 14:30 ? - 96 2022-08-26 15:00 21 ** 97 2022-08-26 15:30 34 *************** 98 2022-08-26 16:00 35 **************** 99 2022-08-26 16:30 22 *** 100 2022-08-26 17:00 35 **************** 101 2022-08-26 17:30 25 ****** 102 2022-08-26 18:00 33 ************** 103 2022-08-26 18:30 23 **** 104 2022-08-26 19:00 37 ****************** 105 2022-08-26 19:30 20 * 106 2022-08-26 20:00 31 ************ 107 2022-08-26 20:30 23 **** 108 2022-08-26 21:00 37 ****************** 109 2022-08-26 21:30 38 ******************* 110 2022-08-26 22:00 23 **** 111 2022-08-26 22:30 30 *********** 112 2022-08-26 23:00 31 ************ 113 2022-08-26 23:30 22 *** 114 2022-08-27 00:00 25 ****** 115 2022-08-27 00:30 28 ********* 116 2022-08-27 01:00 33 ************** 117 2022-08-27 01:30 24 ***** 118 2022-08-27 02:00 27 ******** 119 2022-08-27 02:30 20 * 120 2022-08-27 03:00 22 *** 121 2022-08-27 03:30 23 **** 122 2022-08-27 04:00 31 ************ 123 2022-08-27 04:30 22 *** 124 2022-08-27 05:00 28 ********* 125 2022-08-27 05:30 21 ** 126 2022-08-27 06:00 27 ******** 127 2022-08-27 06:30 25 ****** 0 2022-08-27 07:00 30 *********** 1 2022-08-27 07:30 24 ***** 2 2022-08-27 08:00 27 ******** 3 2022-08-27 08:30 24 ***** 4 2022-08-27 09:00 27 ******** 5 2022-08-27 09:30 21 ** 6 2022-08-27 10:00 28 ********* 7 2022-08-27 10:30 24 ***** 8 2022-08-27 11:00 28 ********* 9 2022-08-27 11:30 22 *** 10 2022-08-27 12:00 28 ********* 11 2022-08-27 12:30 21 ** 12 2022-08-27 13:00 32 ************* 13 2022-08-27 13:30 22 *** 14 2022-08-27 14:00 27 ******** 15 2022-08-27 14:30 22 *** 16 2022-08-27 15:00 27 ******** 17 2022-08-27 15:30 32 ************* 18 2022-08-27 16:00 ? - 19 2022-08-27 16:30 25 ****** 20 2022-08-27 17:00 26 ******* 21 2022-08-27 17:30 21 ** 22 2022-08-27 18:00 27 ******** 23 2022-08-27 18:30 18 - 24 2022-08-27 19:00 29 ********** 25 2022-08-27 19:30 ? - 26 2022-08-27 20:00 19 - 27 2022-08-27 20:30 27 ******** 28 2022-08-27 21:00 30 *********** 29 2022-08-27 21:30 30 *********** 30 2022-08-27 22:00 22 *** 31 2022-08-27 22:30 22 *** 32 2022-08-27 23:00 24 ***** 33 2022-08-27 23:30 21 ** 34 2022-08-28 00:00 28 ********* 35 2022-08-28 00:30 23 **** 36 2022-08-28 01:00 31 ************ 37 2022-08-28 01:30 32 ************* 38 2022-08-28 02:00 24 ***** 39 2022-08-28 02:30 31 ************ 40 2022-08-28 03:00 27 ******** 41 2022-08-28 03:30 28 ********* 42 2022-08-28 04:00 25 ****** 43 2022-08-28 04:30 33 ************** 44 2022-08-28 05:00 25 ****** 45 2022-08-28 05:30 34 *************** 46 2022-08-28 06:00 35 **************** 47 2022-08-28 06:30 25 ****** 48 2022-08-28 07:00 30 *********** 49 2022-08-28 07:30 22 *** 50 2022-08-28 08:00 30 *********** 51 2022-08-28 08:30 ? - 52 2022-08-28 09:00 26 ******* 53 2022-08-28 09:30 31 ************ 54 2022-08-28 10:00 26 ******* 55 2022-08-28 10:30 29 ********** 56 2022-08-28 11:00 26 ******* 57 2022-08-28 11:30 31 ************ 58 2022-08-28 12:00 33 ************** 59 2022-08-28 12:30 27 ******** 60 2022-08-28 13:00 34 *************** 61 2022-08-28 13:30 27 ******** 62 2022-08-28 14:00 29 ********** 63 2022-08-28 14:30 27 ******** 64 2022-08-28 15:00 33 ************** 65 2022-08-28 15:30 33 ************** 66 2022-08-28 16:00 34 *************** 67 2022-08-28 16:30 25 ****** 68 2022-08-28 17:00 31 ************ 69 2022-08-28 17:30 26 ******* 70 2022-08-28 18:00 32 ************* 71 2022-08-28 18:30 33 ************** 72 2022-08-28 19:00 35 **************** 73 2022-08-28 19:30 26 ******* SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 65 --- Lifetime Power-On Resets 0x01 0x010 4 4810 --- Power-on Hours 0x01 0x018 6 2246496613 --- Logical Sectors Written 0x01 0x020 6 14047318 --- Number of Write Commands 0x01 0x028 6 1065482002 --- Logical Sectors Read 0x01 0x030 6 37331369 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 91 --- Spindle Motor Power-on Hours 0x03 0x010 4 20 --- Head Flying Hours 0x03 0x018 4 635 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 477 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS


Hardware for Linux and BSD

GitHub