/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.6-desktop-1omv2390] (OpenMandriva Lx 7.3-3) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Video 3.5 HDD Device Model: ST2000VM003-1CT164 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: ES22 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5900 rpm Form Factor: 3.5 inches Device is: In smartctl database ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Apr 30 15:25:01 2023 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 192 (intermediate level without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 117) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 259) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10b9) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 117 093 006 - 155291656 3 Spin_Up_Time PO---- 096 095 000 - 0 4 Start_Stop_Count -O--CK 097 097 020 - 3147 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 084 060 030 - 325245116 9 Power_On_Hours -O--CK 086 086 000 - 12541 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 1180 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 001 001 000 - 299 188 Command_Timeout -O--CK 100 096 000 - 120260919325 189 High_Fly_Writes -O-RCK 001 001 000 - 766 190 Airflow_Temperature_Cel -O---K 070 035 045 Past 30 (73 89 30 29 0) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 769 193 Load_Cycle_Count -O--CK 099 099 000 - 3150 194 Temperature_Celsius -O---K 030 065 000 - 30 (0 14 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbd GPL VS 512 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 590 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 590 [9] occurred at disk power-on lifetime: 2244 hours (93 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 2e e5 48 00 00 Error: UNC at LBA = 0x022ee548 = 36627784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 02 2e e5 48 40 00 00:05:53.147 READ FPDMA QUEUED 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:05:53.147 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ef 00 07 00 00 00 00 00 00 00 00 a0 00 00:05:53.147 SET FEATURES [Set device spin-up] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:05:53.147 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:05:53.147 SET FEATURES [Set transfer mode] Error 589 [8] occurred at disk power-on lifetime: 2244 hours (93 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 2e e5 48 00 00 Error: UNC at LBA = 0x022ee548 = 36627784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 02 2e e5 48 40 00 00:05:49.595 READ FPDMA QUEUED 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:05:49.595 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ef 00 07 00 00 00 00 00 00 00 00 a0 00 00:05:49.595 SET FEATURES [Set device spin-up] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:05:49.595 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:05:49.594 SET FEATURES [Set transfer mode] Error 588 [7] occurred at disk power-on lifetime: 2244 hours (93 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 2e e5 48 00 00 Error: UNC at LBA = 0x022ee548 = 36627784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 02 2e e5 48 40 00 00:05:46.018 READ FPDMA QUEUED 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:05:46.018 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ef 00 07 00 00 00 00 00 00 00 00 a0 00 00:05:46.018 SET FEATURES [Set device spin-up] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:05:46.018 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:05:46.017 SET FEATURES [Set transfer mode] Error 587 [6] occurred at disk power-on lifetime: 2244 hours (93 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 2e e5 48 00 00 Error: UNC at LBA = 0x022ee548 = 36627784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 02 2e e5 48 40 00 00:05:42.447 READ FPDMA QUEUED 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:05:42.446 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ef 00 07 00 00 00 00 00 00 00 00 a0 00 00:05:42.446 SET FEATURES [Set device spin-up] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:05:42.446 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:05:42.446 SET FEATURES [Set transfer mode] Error 586 [5] occurred at disk power-on lifetime: 2244 hours (93 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 2e e5 48 00 00 Error: UNC at LBA = 0x022ee548 = 36627784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 02 2e e5 48 40 00 00:05:38.886 READ FPDMA QUEUED 61 00 00 00 08 00 00 02 e9 18 e8 40 00 00:05:38.165 WRITE FPDMA QUEUED 61 00 00 01 c0 00 00 08 bb 70 60 40 00 00:05:37.105 WRITE FPDMA QUEUED 61 00 00 04 00 00 00 08 bb 6c 60 40 00 00:05:37.105 WRITE FPDMA QUEUED 61 00 00 04 00 00 00 08 bb 68 60 40 00 00:05:37.105 WRITE FPDMA QUEUED Error 585 [4] occurred at disk power-on lifetime: 2244 hours (93 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 2e e5 48 00 00 Error: UNC at LBA = 0x022ee548 = 36627784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 02 2e e5 48 40 00 00:05:30.297 READ FPDMA QUEUED 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:05:30.297 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ef 00 07 00 00 00 00 00 00 00 00 a0 00 00:05:30.297 SET FEATURES [Set device spin-up] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:05:30.297 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:05:30.297 SET FEATURES [Set transfer mode] Error 584 [3] occurred at disk power-on lifetime: 2244 hours (93 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 2e e5 48 00 00 Error: UNC at LBA = 0x022ee548 = 36627784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 02 2e e5 48 40 00 00:05:26.756 READ FPDMA QUEUED 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:05:26.756 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ef 00 07 00 00 00 00 00 00 00 00 a0 00 00:05:26.756 SET FEATURES [Set device spin-up] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:05:26.755 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:05:26.755 SET FEATURES [Set transfer mode] Error 583 [2] occurred at disk power-on lifetime: 2244 hours (93 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 2e e5 48 00 00 Error: UNC at LBA = 0x022ee548 = 36627784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 02 2e e5 48 40 00 00:05:23.179 READ FPDMA QUEUED 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:05:23.179 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ef 00 07 00 00 00 00 00 00 00 00 a0 00 00:05:23.178 SET FEATURES [Set device spin-up] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:05:23.178 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:05:23.178 SET FEATURES [Set transfer mode] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 12464 - # 2 Short offline Completed without error 00% 12457 - # 3 Extended offline Interrupted (host reset) 00% 12316 - # 4 Extended offline Interrupted (host reset) 00% 12257 - # 5 Extended offline Interrupted (host reset) 00% 12252 - # 6 Short offline Completed without error 00% 12232 - # 7 Short offline Completed without error 00% 12147 - # 8 Extended offline Interrupted (host reset) 80% 12116 - # 9 Short offline Completed without error 00% 12115 - #10 Vendor (0x7c) Completed without error 00% 2378 - #11 Vendor (0x7c) Interrupted (host reset) 00% 2376 - #12 Vendor (0x7c) Completed without error 00% 2252 - #13 Vendor (0x7c) Completed without error 00% 2251 - #14 Short offline Completed without error 00% 2250 - #15 Short offline Completed without error 00% 2250 - #16 Vendor (0x7c) Interrupted (host reset) 90% 2243 - #17 Short offline Completed without error 00% 2241 - #18 Short offline Completed without error 00% 2241 - #19 Short offline Completed without error 00% 2241 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 29/30 Celsius Lifetime Min/Max Temperature: 14/65 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 2 minutes Temperature Logging Interval: 94 minutes Min/Max recommended Temperature: 1/61 Celsius Min/Max Temperature Limit: 2/60 Celsius Temperature History Size (Index): 128 (108) Index Estimated Time Temperature Celsius 109 2023-04-22 08:18 ? - 110 2023-04-22 09:52 31 ************ 111 2023-04-22 11:26 ? - 112 2023-04-22 13:00 31 ************ 113 2023-04-22 14:34 ? - 114 2023-04-22 16:08 31 ************ 115 2023-04-22 17:42 ? - 116 2023-04-22 19:16 18 - 117 2023-04-22 20:50 ? - 118 2023-04-22 22:24 19 - 119 2023-04-22 23:58 ? - 120 2023-04-23 01:32 20 * 121 2023-04-23 03:06 ? - 122 2023-04-23 04:40 21 ** 123 2023-04-23 06:14 ? - 124 2023-04-23 07:48 22 *** 125 2023-04-23 09:22 ? - 126 2023-04-23 10:56 23 **** 127 2023-04-23 12:30 ? - 0 2023-04-23 14:04 22 *** 1 2023-04-23 15:38 ? - 2 2023-04-23 17:12 24 ***** 3 2023-04-23 18:46 ? - 4 2023-04-23 20:20 24 ***** 5 2023-04-23 21:54 ? - 6 2023-04-23 23:28 25 ****** 7 2023-04-24 01:02 ? - 8 2023-04-24 02:36 25 ****** 9 2023-04-24 04:10 ? - 10 2023-04-24 05:44 27 ******** 11 2023-04-24 07:18 ? - 12 2023-04-24 08:52 27 ******** 13 2023-04-24 10:26 ? - 14 2023-04-24 12:00 28 ********* 15 2023-04-24 13:34 ? - 16 2023-04-24 15:08 28 ********* 17 2023-04-24 16:42 ? - 18 2023-04-24 18:16 21 ** 19 2023-04-24 19:50 ? - 20 2023-04-24 21:24 29 ********** 21 2023-04-24 22:58 ? - 22 2023-04-25 00:32 29 ********** 23 2023-04-25 02:06 ? - 24 2023-04-25 03:40 29 ********** 25 2023-04-25 05:14 ? - 26 2023-04-25 06:48 29 ********** 27 2023-04-25 08:22 ? - 28 2023-04-25 09:56 29 ********** 29 2023-04-25 11:30 ? - 30 2023-04-25 13:04 29 ********** 31 2023-04-25 14:38 ? - 32 2023-04-25 16:12 29 ********** 33 2023-04-25 17:46 ? - 34 2023-04-25 19:20 29 ********** 35 2023-04-25 20:54 ? - 36 2023-04-25 22:28 29 ********** 37 2023-04-26 00:02 ? - 38 2023-04-26 01:36 29 ********** 39 2023-04-26 03:10 ? - 40 2023-04-26 04:44 29 ********** 41 2023-04-26 06:18 ? - 42 2023-04-26 07:52 18 - 43 2023-04-26 09:26 ? - 44 2023-04-26 11:00 19 - 45 2023-04-26 12:34 ? - 46 2023-04-26 14:08 20 * 47 2023-04-26 15:42 ? - 48 2023-04-26 17:16 21 ** 49 2023-04-26 18:50 ? - 50 2023-04-26 20:24 26 ******* 51 2023-04-26 21:58 ? - 52 2023-04-26 23:32 27 ******** 53 2023-04-27 01:06 ? - 54 2023-04-27 02:40 27 ******** 55 2023-04-27 04:14 ? - 56 2023-04-27 05:48 28 ********* 57 2023-04-27 07:22 ? - 58 2023-04-27 08:56 23 **** 59 2023-04-27 10:30 ? - 60 2023-04-27 12:04 23 **** 61 2023-04-27 13:38 ? - 62 2023-04-27 15:12 24 ***** 63 2023-04-27 16:46 ? - 64 2023-04-27 18:20 25 ****** 65 2023-04-27 19:54 ? - 66 2023-04-27 21:28 25 ****** 67 2023-04-27 23:02 ? - 68 2023-04-28 00:36 26 ******* 69 2023-04-28 02:10 ? - 70 2023-04-28 03:44 30 *********** 71 2023-04-28 05:18 ? - 72 2023-04-28 06:52 31 ************ 73 2023-04-28 08:26 ? - 74 2023-04-28 10:00 31 ************ 75 2023-04-28 11:34 ? - 76 2023-04-28 13:08 18 - 77 2023-04-28 14:42 ? - 78 2023-04-28 16:16 18 - 79 2023-04-28 17:50 ? - 80 2023-04-28 19:24 22 *** 81 2023-04-28 20:58 ? - 82 2023-04-28 22:32 24 ***** 83 2023-04-29 00:06 ? - 84 2023-04-29 01:40 18 - 85 2023-04-29 03:14 ? - 86 2023-04-29 04:48 19 - 87 2023-04-29 06:22 ? - 88 2023-04-29 07:56 28 ********* 89 2023-04-29 09:30 ? - 90 2023-04-29 11:04 28 ********* 91 2023-04-29 12:38 ? - 92 2023-04-29 14:12 29 ********** 93 2023-04-29 15:46 ? - 94 2023-04-29 17:20 29 ********** 95 2023-04-29 18:54 ? - 96 2023-04-29 20:28 30 *********** 97 2023-04-29 22:02 ? - 98 2023-04-29 23:36 20 * 99 2023-04-30 01:10 ? - 100 2023-04-30 02:44 20 * 101 2023-04-30 04:18 ? - 102 2023-04-30 05:52 26 ******* 103 2023-04-30 07:26 ? - 104 2023-04-30 09:00 24 ***** 105 2023-04-30 10:34 ? - 106 2023-04-30 12:08 25 ****** 107 2023-04-30 13:42 ? - 108 2023-04-30 15:16 29 ********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS