/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.19.8-xm1.0.fc36.x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 970 EVO Plus 1TB Serial Number: -- Firmware Version: 2B2QEXM7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 4 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Utilization: 107,935,735,808 [107 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Mon Oct 10 09:27:04 2022 EDT Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 85 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 7.80W - - 0 0 0 0 0 0 1 + 6.00W - - 1 1 1 1 0 0 2 + 3.40W - - 2 2 2 2 0 0 3 - 0.0700W - - 3 3 3 3 210 1200 4 - 0.0100W - - 4 4 4 4 2000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 40 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 2,924,979 [1.49 TB] Data Units Written: 1,916,330 [981 GB] Host Read Commands: 30,354,419 Host Write Commands: 25,970,132 Controller Busy Time: 85 Power Cycles: 46 Power On Hours: 1,055 Unsafe Shutdowns: 30 Media and Data Integrity Errors: 0 Error Information Log Entries: 189 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 40 Celsius Temperature Sensor 2: 38 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 189 0 0x0008 0x4004 - 0 0 - /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.19.8-xm1.0.fc36.x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 PRO 256GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EXM04B6Q User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Oct 10 09:27:04 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 091 091 000 - 41869 12 Power_Cycle_Count -O--CK 099 099 000 - 420 177 Wear_Leveling_Count PO--C- 099 099 000 - 45 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 064 047 000 - 36 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 206 241 Total_LBAs_Written -O--CK 099 099 000 - 10853716920 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 30/44 Celsius Lifetime Min/Max Temperature: 22/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (33) Index Estimated Time Temperature Celsius 34 2022-10-09 12:10 32 ************* 35 2022-10-09 12:20 33 ************** ... ..( 3 skipped). .. ************** 39 2022-10-09 13:00 33 ************** 40 2022-10-09 13:10 32 ************* 41 2022-10-09 13:20 32 ************* 42 2022-10-09 13:30 33 ************** 43 2022-10-09 13:40 33 ************** 44 2022-10-09 13:50 33 ************** 45 2022-10-09 14:00 34 *************** 46 2022-10-09 14:10 34 *************** 47 2022-10-09 14:20 34 *************** 48 2022-10-09 14:30 35 **************** ... ..( 5 skipped). .. **************** 54 2022-10-09 15:30 35 **************** 55 2022-10-09 15:40 34 *************** 56 2022-10-09 15:50 33 ************** 57 2022-10-09 16:00 34 *************** 58 2022-10-09 16:10 34 *************** 59 2022-10-09 16:20 35 **************** 60 2022-10-09 16:30 35 **************** 61 2022-10-09 16:40 34 *************** 62 2022-10-09 16:50 34 *************** 63 2022-10-09 17:00 35 **************** 64 2022-10-09 17:10 36 ***************** ... ..( 8 skipped). .. ***************** 73 2022-10-09 18:40 36 ***************** 74 2022-10-09 18:50 35 **************** ... ..( 2 skipped). .. **************** 77 2022-10-09 19:20 35 **************** 78 2022-10-09 19:30 36 ***************** ... ..( 3 skipped). .. ***************** 82 2022-10-09 20:10 36 ***************** 83 2022-10-09 20:20 35 **************** 84 2022-10-09 20:30 34 *************** 85 2022-10-09 20:40 33 ************** 86 2022-10-09 20:50 32 ************* ... ..( 16 skipped). .. ************* 103 2022-10-09 23:40 32 ************* 104 2022-10-09 23:50 31 ************ 105 2022-10-10 00:00 31 ************ 106 2022-10-10 00:10 32 ************* 107 2022-10-10 00:20 31 ************ ... ..( 23 skipped). .. ************ 3 2022-10-10 04:20 31 ************ 4 2022-10-10 04:30 30 *********** ... ..( 24 skipped). .. *********** 29 2022-10-10 08:40 30 *********** 30 2022-10-10 08:50 31 ************ 31 2022-10-10 09:00 31 ************ 32 2022-10-10 09:10 32 ************* 33 2022-10-10 09:20 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 65535+ Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 47 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.19.8-xm1.0.fc36.x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate BarraCuda 3.5 (CMR) Device Model: ST4000DM006-2G5107 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: DN02 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Oct 10 09:27:04 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 567) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: (1633) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 080 064 044 - 100320144 3 Spin_Up_Time PO---- 096 089 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 236 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 096 060 045 - 3732661434 9 Power_On_Hours -O--CK 054 054 000 - 41164 (66 220 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 238 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 098 000 - 4 4 5 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 060 042 040 - 40 (Min/Max 38/48) 191 G-Sense_Error_Rate -O--CK 051 051 000 - 98273 192 Power-Off_Retract_Count -O--CK 100 100 000 - 122 193 Load_Cycle_Count -O--CK 089 089 000 - 23585 194 Temperature_Celsius -O---K 040 058 000 - 40 (0 18 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 029 001 000 - 100320144 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1 240 Head_Flying_Hours ------ 100 253 000 - 40518h+18m+18.023s 241 Total_LBAs_Written ------ 100 253 000 - 85451310655 242 Total_LBAs_Read ------ 100 253 000 - 48500430457 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa6 GPL VS 192 Device vendor specific log 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xad GPL VS 16 Device vendor specific log 0xb0 GPL VS 9048 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xd1 GPL VS 264 Device vendor specific log 0xd2 GPL VS 10000 Device vendor specific log 0xd4 GPL VS 2048 Device vendor specific log 0xda GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 00% 4 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 38/48 Celsius Lifetime Min/Max Temperature: 18/58 Celsius Under/Over Temperature Limit Count: 0/3203 SCT Temperature History Version: 2 Temperature Sampling Period: 3 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (43) Index Estimated Time Temperature Celsius 44 2022-10-05 04:13 42 *********************** 45 2022-10-05 05:12 42 *********************** 46 2022-10-05 06:11 42 *********************** 47 2022-10-05 07:10 41 ********************** 48 2022-10-05 08:09 41 ********************** 49 2022-10-05 09:08 41 ********************** 50 2022-10-05 10:07 40 ********************* 51 2022-10-05 11:06 40 ********************* 52 2022-10-05 12:05 40 ********************* 53 2022-10-05 13:04 39 ******************** ... ..( 2 skipped). .. ******************** 56 2022-10-05 16:01 39 ******************** 57 2022-10-05 17:00 41 ********************** 58 2022-10-05 17:59 41 ********************** 59 2022-10-05 18:58 42 *********************** 60 2022-10-05 19:57 42 *********************** 61 2022-10-05 20:56 41 ********************** 62 2022-10-05 21:55 41 ********************** 63 2022-10-05 22:54 43 ************************ 64 2022-10-05 23:53 42 *********************** ... ..( 2 skipped). .. *********************** 67 2022-10-06 02:50 42 *********************** 68 2022-10-06 03:49 41 ********************** ... ..( 2 skipped). .. ********************** 71 2022-10-06 06:46 41 ********************** 72 2022-10-06 07:45 40 ********************* ... ..( 2 skipped). .. ********************* 75 2022-10-06 10:42 40 ********************* 76 2022-10-06 11:41 39 ******************** ... ..( 3 skipped). .. ******************** 80 2022-10-06 15:37 39 ******************** 81 2022-10-06 16:36 42 *********************** ... ..( 3 skipped). .. *********************** 85 2022-10-06 20:32 42 *********************** 86 2022-10-06 21:31 43 ************************ 87 2022-10-06 22:30 43 ************************ 88 2022-10-06 23:29 42 *********************** 89 2022-10-07 00:28 42 *********************** 90 2022-10-07 01:27 41 ********************** ... ..( 3 skipped). .. ********************** 94 2022-10-07 05:23 41 ********************** 95 2022-10-07 06:22 40 ********************* ... ..( 3 skipped). .. ********************* 99 2022-10-07 10:18 40 ********************* 100 2022-10-07 11:17 39 ******************** ... ..( 3 skipped). .. ******************** 104 2022-10-07 15:13 39 ******************** 105 2022-10-07 16:12 40 ********************* 106 2022-10-07 17:11 42 *********************** 107 2022-10-07 18:10 43 ************************ 108 2022-10-07 19:09 43 ************************ 109 2022-10-07 20:08 44 ************************* 110 2022-10-07 21:07 44 ************************* 111 2022-10-07 22:06 44 ************************* 112 2022-10-07 23:05 43 ************************ 113 2022-10-08 00:04 42 *********************** ... ..( 3 skipped). .. *********************** 117 2022-10-08 04:00 42 *********************** 118 2022-10-08 04:59 41 ********************** ... ..( 3 skipped). .. ********************** 122 2022-10-08 08:55 41 ********************** 123 2022-10-08 09:54 42 *********************** 124 2022-10-08 10:53 43 ************************ ... ..( 2 skipped). .. ************************ 127 2022-10-08 13:50 43 ************************ 0 2022-10-08 14:49 44 ************************* ... ..( 2 skipped). .. ************************* 3 2022-10-08 17:46 44 ************************* 4 2022-10-08 18:45 45 ************************** 5 2022-10-08 19:44 44 ************************* 6 2022-10-08 20:43 43 ************************ 7 2022-10-08 21:42 44 ************************* 8 2022-10-08 22:41 42 *********************** ... ..( 2 skipped). .. *********************** 11 2022-10-09 01:38 42 *********************** 12 2022-10-09 02:37 41 ********************** 13 2022-10-09 03:36 41 ********************** 14 2022-10-09 04:35 40 ********************* 15 2022-10-09 05:34 40 ********************* 16 2022-10-09 06:33 40 ********************* 17 2022-10-09 07:32 39 ******************** 18 2022-10-09 08:31 39 ******************** 19 2022-10-09 09:30 38 ******************* 20 2022-10-09 10:29 38 ******************* 21 2022-10-09 11:28 39 ******************** 22 2022-10-09 12:27 41 ********************** ... ..( 2 skipped). .. ********************** 25 2022-10-09 15:24 41 ********************** 26 2022-10-09 16:23 42 *********************** ... ..( 4 skipped). .. *********************** 31 2022-10-09 21:18 42 *********************** 32 2022-10-09 22:17 41 ********************** 33 2022-10-09 23:16 40 ********************* ... ..( 3 skipped). .. ********************* 37 2022-10-10 03:12 40 ********************* 38 2022-10-10 04:11 39 ******************** ... ..( 4 skipped). .. ******************** 43 2022-10-10 09:06 39 ******************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 238 --- Lifetime Power-On Resets 0x01 0x010 4 41164 --- Power-on Hours 0x01 0x018 6 85461230041 --- Logical Sectors Written 0x01 0x020 6 773185842 --- Number of Write Commands 0x01 0x028 6 48471348375 --- Logical Sectors Read 0x01 0x030 6 316118916 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 770861264 N-- Spindle Motor Power-on Hours 0x03 0x010 4 770822263 N-- Head Flying Hours 0x03 0x018 4 23585 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 122 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 40 --- Current Temperature 0x05 0x010 1 40 --- Average Short Term Temperature 0x05 0x018 1 42 --- Average Long Term Temperature 0x05 0x020 1 58 --- Highest Temperature 0x05 0x028 1 0 --- Lowest Temperature 0x05 0x030 1 47 --- Highest Average Short Term Temperature 0x05 0x038 1 32 --- Lowest Average Short Term Temperature 0x05 0x040 1 44 --- Highest Average Long Term Temperature 0x05 0x048 1 33 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 390 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 2099 --- Number of Hardware Resets 0x06 0x010 4 638 --- Number of ASR Events 0x06 0x018 4 1 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 36 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.19.8-xm1.0.fc36.x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 PRO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EXM04B6Q User Capacity: 1,024,209,543,168 bytes [1.02 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Oct 10 09:27:05 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0x0001 (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 543) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 091 091 000 - 44234 12 Power_Cycle_Count -O--CK 098 098 000 - 2013 177 Wear_Leveling_Count PO--C- 098 098 000 - 97 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 073 047 000 - 27 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 132 241 Total_LBAs_Written -O--CK 099 099 000 - 62803672085 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 16 Device vendor specific log 0xa5 GPL,SL VS 16 Device vendor specific log 0xce GPL,SL VS 16 Device vendor specific log 0xde SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/264696 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (76) Index Estimated Time Temperature Celsius 77 2022-10-09 12:10 27 ******** 78 2022-10-09 12:20 28 ********* ... ..( 3 skipped). .. ********* 82 2022-10-09 13:00 28 ********* 83 2022-10-09 13:10 27 ******** 84 2022-10-09 13:20 27 ******** 85 2022-10-09 13:30 28 ********* 86 2022-10-09 13:40 28 ********* 87 2022-10-09 13:50 28 ********* 88 2022-10-09 14:00 29 ********** ... ..( 2 skipped). .. ********** 91 2022-10-09 14:30 29 ********** 92 2022-10-09 14:40 30 *********** ... ..( 4 skipped). .. *********** 97 2022-10-09 15:30 30 *********** 98 2022-10-09 15:40 29 ********** 99 2022-10-09 15:50 28 ********* 100 2022-10-09 16:00 29 ********** 101 2022-10-09 16:10 29 ********** 102 2022-10-09 16:20 30 *********** 103 2022-10-09 16:30 30 *********** 104 2022-10-09 16:40 29 ********** 105 2022-10-09 16:50 29 ********** 106 2022-10-09 17:00 30 *********** ... ..( 6 skipped). .. *********** 113 2022-10-09 18:10 30 *********** 114 2022-10-09 18:20 31 ************ 115 2022-10-09 18:30 31 ************ 116 2022-10-09 18:40 31 ************ 117 2022-10-09 18:50 30 *********** 118 2022-10-09 19:00 29 ********** 119 2022-10-09 19:10 30 *********** 120 2022-10-09 19:20 30 *********** 121 2022-10-09 19:30 30 *********** 122 2022-10-09 19:40 31 ************ 123 2022-10-09 19:50 31 ************ 124 2022-10-09 20:00 30 *********** 125 2022-10-09 20:10 30 *********** 126 2022-10-09 20:20 30 *********** 127 2022-10-09 20:30 29 ********** 0 2022-10-09 20:40 28 ********* 1 2022-10-09 20:50 28 ********* 2 2022-10-09 21:00 27 ******** ... ..( 17 skipped). .. ******** 20 2022-10-10 00:00 27 ******** 21 2022-10-10 00:10 30 *********** 22 2022-10-10 00:20 27 ******** 23 2022-10-10 00:30 27 ******** 24 2022-10-10 00:40 27 ******** 25 2022-10-10 00:50 26 ******* ... ..( 24 skipped). .. ******* 50 2022-10-10 05:00 26 ******* 51 2022-10-10 05:10 25 ****** ... ..( 20 skipped). .. ****** 72 2022-10-10 08:40 25 ****** 73 2022-10-10 08:50 26 ******* 74 2022-10-10 09:00 27 ******** 75 2022-10-10 09:10 27 ******** 76 2022-10-10 09:20 27 ******** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 65535+ Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 44 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC