/dev/sda === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" HDD DT01ACA... Device Model: TOSHIBA DT01ACA050 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MS1OA750 User Capacity: 500 107 862 016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Sep 24 02:34:34 2015 FET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 3644) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 61) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 65536 2 Throughput_Performance P-S--- 141 141 054 - 73 3 Spin_Up_Time POS--- 125 125 024 - 186 (Average 180) 4 Start_Stop_Count -O--C- 100 100 000 - 43 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 118 118 020 - 33 9 Power_On_Hours -O--C- 100 100 000 - 46 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 43 192 Power-Off_Retract_Count -O--CK 100 100 000 - 44 193 Load_Cycle_Count -O--C- 100 100 000 - 44 194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 20/42) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 34/34 Celsius Lifetime Min/Max Temperature: 20/42 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (25) Index Estimated Time Temperature Celsius 26 2015-09-24 00:27 33 ************** ... ..( 12 skipped). .. ************** 39 2015-09-24 00:40 33 ************** 40 2015-09-24 00:41 34 *************** ... ..( 7 skipped). .. *************** 48 2015-09-24 00:49 34 *************** 49 2015-09-24 00:50 35 **************** 50 2015-09-24 00:51 34 *************** ... ..( 4 skipped). .. *************** 55 2015-09-24 00:56 34 *************** 56 2015-09-24 00:57 35 **************** 57 2015-09-24 00:58 34 *************** 58 2015-09-24 00:59 35 **************** ... ..( 8 skipped). .. **************** 67 2015-09-24 01:08 35 **************** 68 2015-09-24 01:09 36 ***************** ... ..( 3 skipped). .. ***************** 72 2015-09-24 01:13 36 ***************** 73 2015-09-24 01:14 35 **************** ... ..( 4 skipped). .. **************** 78 2015-09-24 01:19 35 **************** 79 2015-09-24 01:20 36 ***************** ... ..( 8 skipped). .. ***************** 88 2015-09-24 01:29 36 ***************** 89 2015-09-24 01:30 35 **************** ... ..( 5 skipped). .. **************** 95 2015-09-24 01:36 35 **************** 96 2015-09-24 01:37 34 *************** ... ..( 43 skipped). .. *************** 12 2015-09-24 02:21 34 *************** 13 2015-09-24 02:22 ? - 14 2015-09-24 02:23 34 *************** ... ..( 10 skipped). .. *************** 25 2015-09-24 02:34 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Description 1 ===== = = == General Statistics (rev 1) == 1 0x008 4 43 Lifetime Power-On Resets 1 0x010 4 46 Power-on Hours 1 0x018 6 1598178269 Logical Sectors Written 1 0x020 6 6661258 Number of Write Commands 1 0x028 6 1276724483 Logical Sectors Read 1 0x030 6 2385068 Number of Read Commands 3 ===== = = == Rotating Media Statistics (rev 1) == 3 0x008 4 46 Spindle Motor Power-on Hours 3 0x010 4 46 Head Flying Hours 3 0x018 4 44 Head Load Events 3 0x020 4 0 Number of Reallocated Logical Sectors 3 0x028 4 0 Read Recovery Attempts 3 0x030 4 2 Number of Mechanical Start Failures 4 ===== = = == General Errors Statistics (rev 1) == 4 0x008 4 0 Number of Reported Uncorrectable Errors 4 0x010 4 0 Resets Between Cmd Acceptance and Completion 5 ===== = = == Temperature Statistics (rev 1) == 5 0x008 1 34 Current Temperature 5 0x010 1 32~ Average Short Term Temperature 5 0x018 1 -~ Average Long Term Temperature 5 0x020 1 42 Highest Temperature 5 0x028 1 20 Lowest Temperature 5 0x030 1 39~ Highest Average Short Term Temperature 5 0x038 1 25~ Lowest Average Short Term Temperature 5 0x040 1 -~ Highest Average Long Term Temperature 5 0x048 1 -~ Lowest Average Long Term Temperature 5 0x050 4 0 Time in Over-Temperature 5 0x058 1 60 Specified Maximum Operating Temperature 5 0x060 4 0 Time in Under-Temperature 5 0x068 1 0 Specified Minimum Operating Temperature 6 ===== = = == Transport Statistics (rev 1) == 6 0x008 4 423 Number of Hardware Resets 6 0x010 4 263 Number of ASR Events 6 0x018 4 0 Number of Interface CRC Errors |_ ~ normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS