/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.2.0-39-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WDC PC SN520 SDAPNUW-256G-1006 Serial Number: -- Firmware Version: 20110006 PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 256,060,514,304 [256 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Thu Jan 4 15:45:10 2024 CET Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Log Page Attributes (0x02): Cmd_Eff_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 86 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 2.60W - - 0 0 0 0 0 0 1 + 2.60W - - 1 1 1 1 0 0 2 + 1.70W - - 2 2 2 2 0 0 3 - 0.0250W - - 3 3 3 3 5000 9000 4 - 0.0025W - - 4 4 4 4 5000 44000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 51 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 16% Data Units Read: 60,134,899 [30.7 TB] Data Units Written: 51,502,897 [26.3 TB] Host Read Commands: 924,894,791 Host Write Commands: 958,498,669 Controller Busy Time: 2,530 Power Cycles: 5,867 Power On Hours: 19,555 Unsafe Shutdowns: 194 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.2.0-39-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Travelstar 7K1000 Device Model: HGST HTS721010A9E630 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JB0OA3T0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jan 4 15:45:10 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 169) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 2 Throughput_Performance P-S--K 100 100 040 - 0 3 Spin_Up_Time PO---K 130 100 033 - 2 4 Start_Stop_Count -O--CK 087 087 000 - 20884 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 100 100 040 - 0 9 Power_On_Hours -O--CK 055 055 000 - 19767 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 5765 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 12884901888 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 071 058 045 - 29 (Min/Max 15/31) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 27 192 Power-Off_Retract_Count -O--CK 100 100 000 - 2752554 193 Load_Cycle_Count -O--CK 081 081 000 - 194329 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 19743 - # 2 Short offline Completed without error 00% 19743 - # 3 Short offline Completed without error 00% 19657 - # 4 Short offline Completed without error 00% 16336 - # 5 Short offline Completed without error 00% 16168 - # 6 Short offline Completed without error 00% 16115 - # 7 Short offline Completed without error 00% 16051 - # 8 Short offline Completed without error 00% 15986 - # 9 Short offline Completed without error 00% 15930 - #10 Short offline Completed without error 00% 15869 - #11 Short offline Completed without error 00% 15809 - #12 Short offline Completed without error 00% 15747 - #13 Short offline Completed without error 00% 15685 - #14 Short offline Completed without error 00% 15631 - #15 Short offline Completed without error 00% 15585 - #16 Short offline Completed without error 00% 15533 - #17 Short offline Completed without error 00% 15489 - #18 Short offline Completed without error 00% 15443 - #19 Short offline Completed without error 00% 15419 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 15/31 Celsius Lifetime Min/Max Temperature: 13/42 Celsius Specified Max Operating Temperature: 25 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (54) Index Estimated Time Temperature Celsius 55 2024-01-04 13:38 29 ********** 56 2024-01-04 13:39 29 ********** 57 2024-01-04 13:40 28 ********* 58 2024-01-04 13:41 29 ********** 59 2024-01-04 13:42 28 ********* ... ..( 10 skipped). .. ********* 70 2024-01-04 13:53 28 ********* 71 2024-01-04 13:54 27 ******** 72 2024-01-04 13:55 28 ********* 73 2024-01-04 13:56 28 ********* 74 2024-01-04 13:57 27 ******** 75 2024-01-04 13:58 28 ********* 76 2024-01-04 13:59 27 ******** ... ..( 33 skipped). .. ******** 110 2024-01-04 14:33 27 ******** 111 2024-01-04 14:34 26 ******* 112 2024-01-04 14:35 27 ******** 113 2024-01-04 14:36 26 ******* 114 2024-01-04 14:37 27 ******** 115 2024-01-04 14:38 26 ******* 116 2024-01-04 14:39 27 ******** ... ..( 4 skipped). .. ******** 121 2024-01-04 14:44 27 ******** 122 2024-01-04 14:45 26 ******* 123 2024-01-04 14:46 27 ******** 124 2024-01-04 14:47 26 ******* 125 2024-01-04 14:48 27 ******** 126 2024-01-04 14:49 26 ******* ... ..( 23 skipped). .. ******* 22 2024-01-04 15:13 26 ******* 23 2024-01-04 15:14 27 ******** ... ..( 4 skipped). .. ******** 28 2024-01-04 15:19 27 ******** 29 2024-01-04 15:20 28 ********* 30 2024-01-04 15:21 27 ******** ... ..( 2 skipped). .. ******** 33 2024-01-04 15:24 27 ******** 34 2024-01-04 15:25 28 ********* ... ..( 12 skipped). .. ********* 47 2024-01-04 15:38 28 ********* 48 2024-01-04 15:39 29 ********** ... ..( 5 skipped). .. ********** 54 2024-01-04 15:45 29 ********** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS