/dev/sda,megaraid_disk_00 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-11-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SAMSUNG Product: MZILS3T8HMLH0D4 Revision: CQL8 Compliance: SPC-4 User Capacity: 3,840,755,982,336 bytes [3.84 TB] Logical block size: 512 bytes Physical block size: 4096 bytes LU is resource provisioned, LBPRZ=1 Rotation Rate: Solid State Device Form Factor: 2.5 inches Logical Unit id: 0x5002538a071e7bf0 Serial number: -- Device type: disk Transport protocol: SAS (SPL-4) Local Time is: Sat Jul 12 17:38:22 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled Read Cache is: Enabled Writeback Cache is: Disabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Percentage used endurance indicator: 5% Current Drive Temperature: 38 C Drive Trip Temperature: 70 C Manufactured in week 03 of year 2017 Accumulated start-stop cycles: 46 Specified load-unload count over device lifetime: 0 Accumulated load-unload cycles: 0 Elements in grown defect list: 0 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 0 16 0 16 16 3993440.357 0 write: 0 0 0 0 0 1723870.377 0 verify: 0 0 0 0 0 120963.666 0 Non-medium error count: 24 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed 96 53129 - [- - -] # 2 Default Completed 96 39662 - [- - -] # 3 Default Completed 96 39643 - [- - -] # 4 Default Completed 96 39643 - [- - -] # 5 Default Completed 96 32992 - [- - -] # 6 Default Completed 96 32992 - [- - -] # 7 Default Completed 96 32991 - [- - -] # 8 Default Completed 96 32991 - [- - -] # 9 Default Completed 96 20466 - [- - -] #10 Default Completed 96 20466 - [- - -] #11 Default Completed 96 20465 - [- - -] #12 Default Completed 96 20465 - [- - -] #13 Default Completed 96 12496 - [- - -] #14 Default Completed 96 12496 - [- - -] #15 Default Completed 96 6214 - [- - -] #16 Default Completed 96 6214 - [- - -] #17 Default Completed 96 6214 - [- - -] #18 Default Completed 96 999 - [- - -] #19 Default Completed 96 16 - [- - -] #20 Default Completed 96 15 - [- - -] Long (extended) Self-test duration: 3600 seconds [60.0 minutes] Background scan results log Status: scan is active Accumulated power on time, hours:minutes 66004:41 [3960281 minutes] Number of background scans performed: 14, scan progress: 52.92% Number of background medium scans performed: 14 Protocol Specific port log page for SAS SSP relative target port id = 1 generation code = 9 number of phys = 1 phy identifier = 0 attached device type: SAS or SATA device attached reason: unknown reason: loss of dword synchronization negotiated logical link rate: phy enabled; 12 Gbps attached initiator port: ssp=1 stp=1 smp=1 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5002538a071e7bf2 attached SAS address = 0x51866da09ea1ef01 attached phy identifier = 4 Invalid DWORD count = 75435 Running disparity error count = 78219 Loss of DWORD synchronization count = 16 Phy reset problem count = 1 Phy event descriptors: Received ERROR count: 4 Received address frame error count: 0 Received abandon-class OPEN_REJECT count: 0 Received retry-class OPEN_REJECT count: 13161970 Received SSP frame error count: 0 relative target port id = 2 generation code = 9 number of phys = 1 phy identifier = 1 attached device type: no device attached attached reason: unknown reason: power on negotiated logical link rate: phy enabled; unknown attached initiator port: ssp=0 stp=0 smp=0 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5002538a071e7bf3 attached SAS address = 0x0 attached phy identifier = 0 Invalid DWORD count = 10531 Running disparity error count = 10106 Loss of DWORD synchronization count = 3 Phy reset problem count = 0 Phy event descriptors: Received ERROR count: 0 Received address frame error count: 0 Received abandon-class OPEN_REJECT count: 0 Received retry-class OPEN_REJECT count: 0 Received SSP frame error count: 0 /dev/sda,megaraid_disk_01 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-11-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SAMSUNG Product: MZILS3T8HMLH0D4 Revision: CQL8 Compliance: SPC-4 User Capacity: 3,840,755,982,336 bytes [3.84 TB] Logical block size: 512 bytes Physical block size: 4096 bytes LU is resource provisioned, LBPRZ=1 Rotation Rate: Solid State Device Form Factor: 2.5 inches Logical Unit id: 0x5002538a071a6c50 Serial number: -- Device type: disk Transport protocol: SAS (SPL-4) Local Time is: Sat Jul 12 17:38:22 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled Read Cache is: Enabled Writeback Cache is: Disabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Percentage used endurance indicator: 5% Current Drive Temperature: 38 C Drive Trip Temperature: 70 C Manufactured in week 03 of year 2017 Accumulated start-stop cycles: 45 Specified load-unload count over device lifetime: 0 Accumulated load-unload cycles: 0 Elements in grown defect list: 0 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 0 240 0 240 250 4710282.887 10 write: 0 32 0 32 32 1983482.599 0 verify: 0 0 0 0 0 122569.803 0 Non-medium error count: 24 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed 96 53130 - [- - -] # 2 Default Completed 96 39662 - [- - -] # 3 Default Completed 96 39643 - [- - -] # 4 Default Completed 96 39643 - [- - -] # 5 Default Completed 96 32992 - [- - -] # 6 Default Completed 96 32992 - [- - -] # 7 Default Completed 96 32991 - [- - -] # 8 Default Completed 96 32991 - [- - -] # 9 Default Completed 96 20466 - [- - -] #10 Default Completed 96 20466 - [- - -] #11 Default Completed 96 20466 - [- - -] #12 Default Completed 96 20466 - [- - -] #13 Default Completed 96 12497 - [- - -] #14 Default Completed 96 12496 - [- - -] #15 Default Completed 96 6214 - [- - -] #16 Default Completed 96 6214 - [- - -] #17 Default Completed 96 6214 - [- - -] #18 Default Completed 96 999 - [- - -] #19 Default Completed 96 15 - [- - -] #20 Default Completed 96 15 - [- - -] Long (extended) Self-test duration: 3600 seconds [60.0 minutes] Background scan results log Status: scan is active Accumulated power on time, hours:minutes 66005:33 [3960333 minutes] Number of background scans performed: 2, scan progress: 55.77% Number of background medium scans performed: 2 Protocol Specific port log page for SAS SSP relative target port id = 1 generation code = 5 number of phys = 1 phy identifier = 0 attached device type: SAS or SATA device attached reason: power on reason: loss of dword synchronization negotiated logical link rate: phy enabled; 12 Gbps attached initiator port: ssp=1 stp=1 smp=1 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5002538a071a6c52 attached SAS address = 0x51866da09ea1ef00 attached phy identifier = 0 Invalid DWORD count = 76865 Running disparity error count = 76942 Loss of DWORD synchronization count = 16 Phy reset problem count = 1 Phy event descriptors: Received ERROR count: 1 Received address frame error count: 0 Received abandon-class OPEN_REJECT count: 0 Received retry-class OPEN_REJECT count: 13181729 Received SSP frame error count: 0 relative target port id = 2 generation code = 5 number of phys = 1 phy identifier = 1 attached device type: no device attached attached reason: unknown reason: power on negotiated logical link rate: phy enabled; unknown attached initiator port: ssp=0 stp=0 smp=0 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5002538a071a6c53 attached SAS address = 0x0 attached phy identifier = 0 Invalid DWORD count = 123 Running disparity error count = 121 Loss of DWORD synchronization count = 3 Phy reset problem count = 0 Phy event descriptors: Received ERROR count: 0 Received address frame error count: 0 Received abandon-class OPEN_REJECT count: 0 Received retry-class OPEN_REJECT count: 0 Received SSP frame error count: 0