[ 128.368] (--) Log file renamed from "/var/log/Xorg.pid-4387.log" to "/var/log/Xorg.0.log" [ 128.369] X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 [ 128.369] Current Operating System: Linux XXX 6.11.0-107009-tuxedo #9tuxnoble1 SMP PREEMPT_DYNAMIC Fri Nov 8 19:23:20 UTC 2024 x86_64 [ 128.369] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.11.0-107009-tuxedo boot=fll rootwait quiet splash systemd.show_status=false i915.enable_psr=0 [ 128.369] xorg-server 2:21.1.12-1ubuntu1.1 (For technical support please see http://www.ubuntu.com/support) [ 128.369] Current version of pixman: 0.42.2 [ 128.369] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 128.369] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 128.369] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 26 18:55:07 2024 [ 128.369] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 128.369] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 128.369] (==) No Layout section. Using the first Screen section. [ 128.369] (==) No screen section available. Using defaults. [ 128.369] (**) |-->Screen "Default Screen Section" (0) [ 128.369] (**) | |-->Monitor "<default monitor>" [ 128.369] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 128.369] (**) Allowing byte-swapped clients [ 128.369] (==) Automatically adding devices [ 128.369] (==) Automatically enabling devices [ 128.369] (==) Automatically adding GPU devices [ 128.369] (==) Automatically binding GPU devices [ 128.369] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 128.369] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 128.369] Entry deleted from font path. [ 128.369] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 128.369] Entry deleted from font path. [ 128.369] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 128.369] Entry deleted from font path. [ 128.369] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 128.369] Entry deleted from font path. [ 128.369] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 128.369] Entry deleted from font path. [ 128.369] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 128.369] (==) ModulePath set to "/usr/lib/xorg/modules" [ 128.369] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 128.369] (II) Loader magic: 0x5a21d3ebf020 [ 128.369] (II) Module ABI versions: [ 128.369] X.Org ANSI C Emulation: 0.4 [ 128.369] X.Org Video Driver: 25.2 [ 128.369] X.Org XInput driver : 24.4 [ 128.369] X.Org Server Extension : 10.0 [ 128.369] (++) using VT number 2 [ 128.369] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 128.370] (II) xfree86: Adding drm device (/dev/dri/card1) [ 128.370] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1 [ 128.388] (--) PCI:*(0@0:2:0) 8086:46b3:8086:3024 rev 12, Mem @ 0x603c000000/16777216, 0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072 [ 128.388] (II) LoadModule: "glx" [ 128.389] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 128.390] (II) Module glx: vendor="X.Org Foundation" [ 128.390] compiled for 1.21.1.11, module version = 1.0.0 [ 128.390] ABI class: X.Org Server Extension, version 10.0 [ 128.390] (==) Matched modesetting as autoconfigured driver 0 [ 128.390] (==) Matched fbdev as autoconfigured driver 1 [ 128.390] (==) Matched vesa as autoconfigured driver 2 [ 128.390] (==) Assigned the driver to the xf86ConfigLayout [ 128.390] (II) LoadModule: "modesetting" [ 128.390] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 128.390] (II) Module modesetting: vendor="X.Org Foundation" [ 128.390] compiled for 1.21.1.11, module version = 1.21.1 [ 128.390] Module class: X.Org Video Driver [ 128.390] ABI class: X.Org Video Driver, version 25.2 [ 128.390] (II) LoadModule: "fbdev" [ 128.390] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 128.390] (II) Module fbdev: vendor="X.Org Foundation" [ 128.390] compiled for 1.21.1.11, module version = 0.5.0 [ 128.390] Module class: X.Org Video Driver [ 128.390] ABI class: X.Org Video Driver, version 25.2 [ 128.390] (II) LoadModule: "vesa" [ 128.390] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 128.390] (II) Module vesa: vendor="X.Org Foundation" [ 128.390] compiled for 1.21.1.7, module version = 2.6.0 [ 128.390] Module class: X.Org Video Driver [ 128.390] ABI class: X.Org Video Driver, version 25.2 [ 128.390] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 128.390] (II) FBDEV: driver for framebuffer: fbdev [ 128.390] (II) VESA: driver for VESA chipsets: vesa [ 128.402] (II) modeset(0): using drv /dev/dri/card1 [ 128.402] (WW) Falling back to old probe method for fbdev [ 128.402] (II) Loading sub module "fbdevhw" [ 128.402] (II) LoadModule: "fbdevhw" [ 128.402] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 128.402] (II) Module fbdevhw: vendor="X.Org Foundation" [ 128.402] compiled for 1.21.1.11, module version = 0.0.2 [ 128.402] ABI class: X.Org Video Driver, version 25.2 [ 128.403] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 128.403] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 128.403] (==) modeset(0): RGB weight 888 [ 128.403] (==) modeset(0): Default visual is TrueColor [ 128.403] (II) Loading sub module "glamoregl" [ 128.403] (II) LoadModule: "glamoregl" [ 128.403] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 128.419] (II) Module glamoregl: vendor="X.Org Foundation" [ 128.419] compiled for 1.21.1.11, module version = 1.0.1 [ 128.419] ABI class: X.Org ANSI C Emulation, version 0.4 [ 128.426] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Graphics (ADL GT2) [ 128.426] (II) modeset(0): glamor initialized [ 128.426] (==) modeset(0): VariableRefresh: disabled [ 128.426] (==) modeset(0): AsyncFlipSecondaries: disabled [ 128.431] (II) modeset(0): Output HDMI-1 has no monitor section [ 128.458] (II) modeset(0): Output HDMI-2 has no monitor section [ 128.458] (II) modeset(0): Output DP-1 has no monitor section [ 128.458] (II) modeset(0): Output DP-2 has no monitor section [ 128.458] (II) modeset(0): Output DP-3 has no monitor section [ 128.458] (II) modeset(0): Output DP-4 has no monitor section [ 128.464] (II) modeset(0): EDID for output HDMI-1 [ 128.491] (II) modeset(0): EDID for output HDMI-2 [ 128.491] (II) modeset(0): Manufacturer: AUS Model: 27ef Serial#: ... [ 128.491] (II) modeset(0): Year: 2024 Week: 37 [ 128.491] (II) modeset(0): EDID Version: 1.3 [ 128.491] (II) modeset(0): Digital Display Input [ 128.491] (II) modeset(0): Max Image Size [cm]: horiz.: 60 vert.: 34 [ 128.491] (II) modeset(0): Gamma: 2.20 [ 128.491] (II) modeset(0): DPMS capabilities: StandBy Suspend Off [ 128.491] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 128.491] (II) modeset(0): Default color space is primary color space [ 128.491] (II) modeset(0): First detailed timing is preferred mode [ 128.491] (II) modeset(0): redX: 0.674 redY: 0.314 greenX: 0.273 greenY: 0.670 [ 128.491] (II) modeset(0): blueX: 0.149 blueY: 0.048 whiteX: 0.313 whiteY: 0.329 [ 128.491] (II) modeset(0): Supported established timings: [ 128.491] (II) modeset(0): 720x400@70Hz [ 128.491] (II) modeset(0): 640x480@60Hz [ 128.491] (II) modeset(0): 640x480@67Hz [ 128.491] (II) modeset(0): 640x480@72Hz [ 128.491] (II) modeset(0): 640x480@75Hz [ 128.491] (II) modeset(0): 800x600@56Hz [ 128.491] (II) modeset(0): 800x600@60Hz [ 128.491] (II) modeset(0): 800x600@72Hz [ 128.491] (II) modeset(0): 800x600@75Hz [ 128.491] (II) modeset(0): 1024x768@60Hz [ 128.491] (II) modeset(0): 1024x768@70Hz [ 128.491] (II) modeset(0): 1024x768@75Hz [ 128.491] (II) modeset(0): 1280x1024@75Hz [ 128.491] (II) modeset(0): Manufacturer's mask: 0 [ 128.491] (II) modeset(0): Supported standard timings: [ 128.491] (II) modeset(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 [ 128.491] (II) modeset(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 128.491] (II) modeset(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 128.491] (II) modeset(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 128.491] (II) modeset(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 128.491] (II) modeset(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 128.491] (II) modeset(0): #6: hsize: 1152 vsize 864 refresh: 60 vid: 16497 [ 128.491] (II) modeset(0): Supported detailed timing: [ 128.491] (II) modeset(0): clock: 241.7 MHz Image Size: 597 x 336 mm [ 128.491] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 128.491] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0 [ 128.491] (II) modeset(0): Ranges: V min: 48 V max: 144 Hz, H min: 30 H max: 223 kHz, PixClock max 605 MHz [ 128.491] (II) modeset(0): Monitor name: VG27AQ3A [ 128.491] (II) modeset(0): Serial No: S9LMAS009485 [ 128.491] (II) modeset(0): Supported detailed timing: [ 128.491] (II) modeset(0): clock: 593.8 MHz Image Size: 597 x 336 mm [ 128.491] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2713 h_border: 0 [ 128.491] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1520 v_border: 0 [ 128.491] (II) modeset(0): Supported detailed timing: [ 128.491] (II) modeset(0): clock: 497.8 MHz Image Size: 597 x 336 mm [ 128.491] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 128.491] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1525 v_border: 0 [ 128.491] (II) modeset(0): Supported detailed timing: [ 128.491] (II) modeset(0): clock: 410.7 MHz Image Size: 597 x 336 mm [ 128.491] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 128.491] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1510 v_border: 0 [ 128.491] (II) modeset(0): Number of EDID sections to follow: 1 [ 128.491] (II) modeset(0): EDID (in hex): [ 128.491] (II) modeset(0): 00ffffffffffff0006b3ef2701010101 [ 128.491] (II) modeset(0): 25220103803c2278eea255ac5046ab26 [ 128.491] (II) modeset(0): 0c5054bfcf00d1c0b300950081408180 [ 128.491] (II) modeset(0): 81c0714001016a5e00a0a0a029503020 [ 128.491] (II) modeset(0): 350055502100001a000000fd0030901e [ 128.491] (II) modeset(0): df3c000a202020202020000000fc0056 [ 128.491] (II) modeset(0): 473237415133410a20202020000000ff [ 128.491] (II) modeset(0): 0053394c4d41533030393438350a01f8 [ 128.491] (II) modeset(0): 02034871496103049012131f3f402309 [ 128.491] (II) modeset(0): 07078301000067030c00100038446ad8 [ 128.491] (II) modeset(0): 5dc4017880030030906d1a0000020130 [ 128.491] (II) modeset(0): 90f00000000000e305df01e20f01e606 [ 128.491] (II) modeset(0): 0501505044e200eaf6e70099a0a05050 [ 128.491] (II) modeset(0): 3020350055502100001a70c200a0a0a0 [ 128.491] (II) modeset(0): 55503020350055502100001a70a000a0 [ 128.491] (II) modeset(0): a0a046503020350055502100001a0007 [ 128.491] (--) modeset(0): HDMI max TMDS frequency 340000KHz [ 128.491] (II) modeset(0): Printing probed modes for output HDMI-2 [ 128.491] (II) modeset(0): Modeline "2560x1440"x60.0 241.70 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.9 kHz eP) [ 128.491] (II) modeset(0): Modeline "3840x2160"x60.0 594.00 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (135.0 kHz e) [ 128.491] (II) modeset(0): Modeline "3840x2160"x59.9 593.41 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (134.9 kHz e) [ 128.491] (II) modeset(0): Modeline "2560x1440"x144.0 593.82 2560 2608 2640 2713 1440 1443 1448 1520 +hsync -vsync (218.9 kHz e) [ 128.491] (II) modeset(0): Modeline "2560x1440"x120.0 497.76 2560 2608 2640 2720 1440 1443 1448 1525 +hsync -vsync (183.0 kHz e) [ 128.491] (II) modeset(0): Modeline "2560x1440"x100.0 410.72 2560 2608 2640 2720 1440 1443 1448 1510 +hsync -vsync (151.0 kHz e) [ 128.491] (II) modeset(0): Modeline "1920x1080"x120.0 297.00 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (135.0 kHz e) [ 128.491] (II) modeset(0): Modeline "1920x1080"x100.0 297.00 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (112.5 kHz e) [ 128.491] (II) modeset(0): Modeline "1920x1080"x119.9 296.70 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (134.9 kHz e) [ 128.491] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 128.491] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 128.491] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 128.491] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e) [ 128.491] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 128.491] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 128.491] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 128.491] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 128.491] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 128.491] (II) modeset(0): Modeline "1152x864"x60.0 81.58 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) [ 128.491] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 128.491] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 128.491] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 128.491] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 128.491] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 128.491] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 128.491] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 128.491] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 128.491] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 128.491] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 128.491] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 128.491] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 128.491] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 128.491] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 128.491] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 128.491] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 128.491] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 128.491] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 128.491] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 128.491] (II) modeset(0): EDID for output DP-1 [ 128.491] (II) modeset(0): EDID for output DP-2 [ 128.491] (II) modeset(0): EDID for output DP-3 [ 128.491] (II) modeset(0): EDID for output DP-4 [ 128.491] (II) modeset(0): Output HDMI-1 disconnected [ 128.491] (II) modeset(0): Output HDMI-2 connected [ 128.491] (II) modeset(0): Output DP-1 disconnected [ 128.491] (II) modeset(0): Output DP-2 disconnected [ 128.491] (II) modeset(0): Output DP-3 disconnected [ 128.491] (II) modeset(0): Output DP-4 disconnected [ 128.491] (II) modeset(0): Using exact sizes for initial modes [ 128.491] (II) modeset(0): Output HDMI-2 using initial mode 2560x1440 +0+0 [ 128.491] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 128.491] (++) modeset(0): DPI set to (144, 144) [ 128.491] (II) Loading sub module "fb" [ 128.491] (II) LoadModule: "fb" [ 128.491] (II) Module "fb" already built-in [ 128.491] (II) UnloadModule: "fbdev" [ 128.491] (II) Unloading fbdev [ 128.491] (II) UnloadSubModule: "fbdevhw" [ 128.491] (II) Unloading fbdevhw [ 128.491] (II) UnloadModule: "vesa" [ 128.491] (II) Unloading vesa [ 128.498] (==) modeset(0): Backing store enabled [ 128.498] (==) modeset(0): Silken mouse enabled [ 128.637] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 128.637] (==) modeset(0): DPMS enabled [ 128.637] (II) modeset(0): [DRI2] Setup complete [ 128.637] (II) modeset(0): [DRI2] DRI driver: iris [ 128.637] (II) modeset(0): [DRI2] VDPAU driver: va_gl [ 128.637] (II) Initializing extension Generic Event Extension [ 128.638] (II) Initializing extension SHAPE [ 128.638] (II) Initializing extension MIT-SHM [ 128.638] (II) Initializing extension XInputExtension [ 128.639] (II) Initializing extension XTEST [ 128.639] (II) Initializing extension BIG-REQUESTS [ 128.639] (II) Initializing extension SYNC [ 128.639] (II) Initializing extension XKEYBOARD [ 128.640] (II) Initializing extension XC-MISC [ 128.640] (II) Initializing extension SECURITY [ 128.640] (II) Initializing extension XFIXES [ 128.640] (II) Initializing extension RENDER [ 128.641] (II) Initializing extension RANDR [ 128.641] (II) Initializing extension COMPOSITE [ 128.641] (II) Initializing extension DAMAGE [ 128.641] (II) Initializing extension MIT-SCREEN-SAVER [ 128.641] (II) Initializing extension DOUBLE-BUFFER [ 128.641] (II) Initializing extension RECORD [ 128.641] (II) Initializing extension DPMS [ 128.641] (II) Initializing extension Present [ 128.641] (II) Initializing extension DRI3 [ 128.641] (II) Initializing extension X-Resource [ 128.641] (II) Initializing extension XVideo [ 128.641] (II) Initializing extension XVideo-MotionCompensation [ 128.641] (II) Initializing extension SELinux [ 128.641] (II) SELinux: Disabled on system [ 128.641] (II) Initializing extension GLX [ 128.662] (II) AIGLX: Loaded and initialized iris [ 128.662] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 128.662] (II) Initializing extension XFree86-VidModeExtension [ 128.663] (II) Initializing extension XFree86-DGA [ 128.663] (II) Initializing extension XFree86-DRI [ 128.663] (II) Initializing extension DRI2 [ 128.663] (II) modeset(0): Damage tracking initialized [ 128.663] (II) modeset(0): Setting screen physical size to 451 x 254 [ 128.685] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 128.685] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 128.685] (**) Power Button: Applying InputClass "system-keyboard" [ 128.685] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 128.685] (II) LoadModule: "libinput" [ 128.685] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 128.686] (II) Module libinput: vendor="X.Org Foundation" [ 128.686] compiled for 1.21.1.11, module version = 1.4.0 [ 128.686] Module class: X.Org XInput Driver [ 128.686] ABI class: X.Org XInput driver, version 24.4 [ 128.686] (II) Using input driver 'libinput' for 'Power Button' [ 128.686] (**) Power Button: always reports core events [ 128.686] (**) Option "Device" "/dev/input/event2" [ 128.687] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 128.687] (II) event2 - Power Button: device is a keyboard [ 128.687] (II) event2 - Power Button: device removed [ 128.706] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 128.706] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 128.706] (**) Option "xkb_model" "pc105" [ 128.706] (**) Option "xkb_layout" "de" [ 128.706] (WW) Option "xkb_variant" requires a string value [ 128.719] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 128.719] (II) event2 - Power Button: device is a keyboard [ 128.719] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 128.719] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 128.719] (**) Video Bus: Applying InputClass "system-keyboard" [ 128.719] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 128.719] (II) Using input driver 'libinput' for 'Video Bus' [ 128.719] (**) Video Bus: always reports core events [ 128.719] (**) Option "Device" "/dev/input/event7" [ 128.720] (II) event7 - Video Bus: is tagged by udev as: Keyboard [ 128.720] (II) event7 - Video Bus: device is a keyboard [ 128.720] (II) event7 - Video Bus: device removed [ 128.759] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7" [ 128.759] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 128.759] (**) Option "xkb_model" "pc105" [ 128.759] (**) Option "xkb_layout" "de" [ 128.759] (WW) Option "xkb_variant" requires a string value [ 128.760] (II) event7 - Video Bus: is tagged by udev as: Keyboard [ 128.760] (II) event7 - Video Bus: device is a keyboard [ 128.761] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 128.761] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 128.762] (**) Power Button: Applying InputClass "system-keyboard" [ 128.762] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 128.762] (II) Using input driver 'libinput' for 'Power Button' [ 128.762] (**) Power Button: always reports core events [ 128.762] (**) Option "Device" "/dev/input/event1" [ 128.763] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 128.763] (II) event1 - Power Button: device is a keyboard [ 128.763] (II) event1 - Power Button: device removed [ 128.774] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 128.774] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 128.774] (**) Option "xkb_model" "pc105" [ 128.774] (**) Option "xkb_layout" "de" [ 128.774] (WW) Option "xkb_variant" requires a string value [ 128.775] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 128.775] (II) event1 - Power Button: device is a keyboard [ 128.776] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 128.776] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 128.776] (**) Sleep Button: Applying InputClass "system-keyboard" [ 128.776] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 128.776] (II) Using input driver 'libinput' for 'Sleep Button' [ 128.776] (**) Sleep Button: always reports core events [ 128.776] (**) Option "Device" "/dev/input/event0" [ 128.777] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 128.777] (II) event0 - Sleep Button: device is a keyboard [ 128.777] (II) event0 - Sleep Button: device removed [ 128.794] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 128.794] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 128.794] (**) Option "xkb_model" "pc105" [ 128.794] (**) Option "xkb_layout" "de" [ 128.794] (WW) Option "xkb_variant" requires a string value [ 128.795] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 128.795] (II) event0 - Sleep Button: device is a keyboard [ 128.797] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3) [ 128.797] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall" [ 128.797] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall" [ 128.797] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse' [ 128.797] (**) Logitech USB Optical Mouse: always reports core events [ 128.797] (**) Option "Device" "/dev/input/event3" [ 128.799] (II) event3 - Logitech USB Optical Mouse: is tagged by udev as: Mouse [ 128.799] (II) event3 - Logitech USB Optical Mouse: device is a pointer [ 128.799] (II) event3 - Logitech USB Optical Mouse: device removed [ 128.826] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 128.826] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 128.826] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 128.826] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:046D:C077.0001/input/input3/event3" [ 128.826] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10) [ 128.826] (**) Option "AccelerationScheme" "none" [ 128.826] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0 [ 128.826] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 128.826] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 128.828] (II) event3 - Logitech USB Optical Mouse: is tagged by udev as: Mouse [ 128.828] (II) event3 - Logitech USB Optical Mouse: device is a pointer [ 128.830] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 128.830] (II) No input driver specified, ignoring this device. [ 128.830] (II) This device may have been added with another device file. [ 128.831] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4) [ 128.831] (**) Microsoft Wired Keyboard 600: Applying InputClass "libinput keyboard catchall" [ 128.831] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard" [ 128.831] (**) Microsoft Wired Keyboard 600: Applying InputClass "libinput keyboard catchall" [ 128.831] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600' [ 128.831] (**) Microsoft Wired Keyboard 600: always reports core events [ 128.831] (**) Option "Device" "/dev/input/event4" [ 128.832] (II) event4 - Microsoft Wired Keyboard 600: is tagged by udev as: Keyboard [ 128.833] (II) event4 - Microsoft Wired Keyboard 600: device is a keyboard [ 128.833] (II) event4 - Microsoft Wired Keyboard 600: device removed [ 128.854] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/0003:045E:07F8.0002/input/input4/event4" [ 128.854] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 11) [ 128.854] (**) Option "xkb_model" "pc105" [ 128.854] (**) Option "xkb_layout" "de" [ 128.854] (WW) Option "xkb_variant" requires a string value [ 128.856] (II) event4 - Microsoft Wired Keyboard 600: is tagged by udev as: Keyboard [ 128.857] (II) event4 - Microsoft Wired Keyboard 600: device is a keyboard [ 128.859] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 Consumer Control (/dev/input/event5) [ 128.859] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 128.859] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "system-keyboard" [ 128.859] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 128.859] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600 Consumer Control' [ 128.859] (**) Microsoft Wired Keyboard 600 Consumer Control: always reports core events [ 128.859] (**) Option "Device" "/dev/input/event5" [ 128.860] (II) event5 - Microsoft Wired Keyboard 600 Consumer Control: is tagged by udev as: Keyboard [ 128.860] (II) event5 - Microsoft Wired Keyboard 600 Consumer Control: device is a keyboard [ 128.861] (II) event5 - Microsoft Wired Keyboard 600 Consumer Control: device removed [ 128.878] (II) libinput: Microsoft Wired Keyboard 600 Consumer Control: needs a virtual subdevice [ 128.878] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.1/0003:045E:07F8.0003/input/input5/event5" [ 128.878] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600 Consumer Control" (type: MOUSE, id 12) [ 128.878] (**) Option "AccelerationScheme" "none" [ 128.878] (**) Microsoft Wired Keyboard 600 Consumer Control: (accel) selected scheme none/0 [ 128.878] (**) Microsoft Wired Keyboard 600 Consumer Control: (accel) acceleration factor: 2.000 [ 128.878] (**) Microsoft Wired Keyboard 600 Consumer Control: (accel) acceleration threshold: 4 [ 128.880] (II) event5 - Microsoft Wired Keyboard 600 Consumer Control: is tagged by udev as: Keyboard [ 128.880] (II) event5 - Microsoft Wired Keyboard 600 Consumer Control: device is a keyboard [ 128.881] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 System Control (/dev/input/event6) [ 128.881] (**) Microsoft Wired Keyboard 600 System Control: Applying InputClass "libinput keyboard catchall" [ 128.881] (**) Microsoft Wired Keyboard 600 System Control: Applying InputClass "system-keyboard" [ 128.881] (**) Microsoft Wired Keyboard 600 System Control: Applying InputClass "libinput keyboard catchall" [ 128.881] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600 System Control' [ 128.881] (**) Microsoft Wired Keyboard 600 System Control: always reports core events [ 128.881] (**) Option "Device" "/dev/input/event6" [ 128.883] (II) event6 - Microsoft Wired Keyboard 600 System Control: is tagged by udev as: Keyboard [ 128.883] (II) event6 - Microsoft Wired Keyboard 600 System Control: device is a keyboard [ 128.883] (II) event6 - Microsoft Wired Keyboard 600 System Control: device removed [ 128.905] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.1/0003:045E:07F8.0003/input/input6/event6" [ 128.905] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600 System Control" (type: KEYBOARD, id 13) [ 128.905] (**) Option "xkb_model" "pc105" [ 128.905] (**) Option "xkb_layout" "de" [ 128.905] (WW) Option "xkb_variant" requires a string value [ 128.907] (II) event6 - Microsoft Wired Keyboard 600 System Control: is tagged by udev as: Keyboard [ 128.907] (II) event6 - Microsoft Wired Keyboard 600 System Control: device is a keyboard [ 128.908] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10) [ 128.908] (II) No input driver specified, ignoring this device. [ 128.908] (II) This device may have been added with another device file. [ 128.909] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11) [ 128.909] (II) No input driver specified, ignoring this device. [ 128.909] (II) This device may have been added with another device file. [ 128.909] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12) [ 128.909] (II) No input driver specified, ignoring this device. [ 128.909] (II) This device may have been added with another device file. [ 128.910] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event13) [ 128.910] (II) No input driver specified, ignoring this device. [ 128.910] (II) This device may have been added with another device file. [ 128.910] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8) [ 128.910] (II) No input driver specified, ignoring this device. [ 128.910] (II) This device may have been added with another device file. [ 128.911] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9) [ 128.911] (II) No input driver specified, ignoring this device. [ 128.911] (II) This device may have been added with another device file. [ 128.919] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 128.919] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "system-keyboard" [ 128.919] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 128.919] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600 Consumer Control' [ 128.919] (**) Microsoft Wired Keyboard 600 Consumer Control: always reports core events [ 128.919] (**) Option "Device" "/dev/input/event5" [ 128.919] (II) libinput: Microsoft Wired Keyboard 600 Consumer Control: is a virtual subdevice [ 128.919] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.1/0003:045E:07F8.0003/input/input5/event5" [ 128.919] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600 Consumer Control" (type: KEYBOARD, id 14) [ 128.919] (**) Option "xkb_model" "pc105" [ 128.919] (**) Option "xkb_layout" "de" [ 128.919] (WW) Option "xkb_variant" requires a string value [ 130.719] (II) modeset(0): EDID vendor "AUS", prod id 10223 [ 130.719] (II) modeset(0): Using EDID range info for horizontal sync [ 130.719] (II) modeset(0): Using EDID range info for vertical refresh [ 130.719] (II) modeset(0): Printing DDC gathered Modelines: [ 130.719] (II) modeset(0): Modeline "2560x1440"x0.0 241.70 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.9 kHz eP) [ 130.719] (II) modeset(0): Modeline "2560x1440"x0.0 593.82 2560 2608 2640 2713 1440 1443 1448 1520 +hsync -vsync (218.9 kHz e) [ 130.719] (II) modeset(0): Modeline "2560x1440"x0.0 497.76 2560 2608 2640 2720 1440 1443 1448 1525 +hsync -vsync (183.0 kHz e) [ 130.719] (II) modeset(0): Modeline "2560x1440"x0.0 410.72 2560 2608 2640 2720 1440 1443 1448 1510 +hsync -vsync (151.0 kHz e) [ 130.719] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 130.719] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 130.719] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 130.719] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 130.719] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 130.719] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 130.719] (II) modeset(0): Modeline "1920x1080"x0.0 297.00 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (135.0 kHz e) [ 130.719] (II) modeset(0): Modeline "1920x1080"x0.0 297.00 1920 2448 2492 2640 1080 1084 1094 1125 +hsync +vsync (112.5 kHz e) [ 130.719] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 130.719] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 130.719] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 130.719] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 130.719] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 130.719] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 130.719] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 130.719] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 130.719] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 130.719] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 130.719] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 130.719] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 130.719] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 130.719] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 130.719] (II) modeset(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 130.719] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 130.719] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 130.719] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e) [ 130.719] (--) modeset(0): HDMI max TMDS frequency 340000KHz [ 130.969] (II) modeset(0): EDID vendor "AUS", prod id 10223 [ 130.969] (II) modeset(0): Using hsync ranges from config file [ 130.969] (II) modeset(0): Using vrefresh ranges from config file [ 130.969] (II) modeset(0): Printing DDC gathered Modelines: [ 130.969] (II) modeset(0): Modeline "2560x1440"x0.0 241.70 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.9 kHz eP) [ 130.969] (II) modeset(0): Modeline "2560x1440"x0.0 593.82 2560 2608 2640 2713 1440 1443 1448 1520 +hsync -vsync (218.9 kHz e) [ 130.969] (II) modeset(0): Modeline "2560x1440"x0.0 497.76 2560 2608 2640 2720 1440 1443 1448 1525 +hsync -vsync (183.0 kHz e) [ 130.969] (II) modeset(0): Modeline "2560x1440"x0.0 410.72 2560 2608 2640 2720 1440 1443 1448 1510 +hsync -vsync (151.0 kHz e) [ 130.969] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 130.969] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 130.969] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 130.969] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 130.969] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 130.969] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 130.969] (II) modeset(0): Modeline "1920x1080"x0.0 297.00 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (135.0 kHz e) [ 130.969] (II) modeset(0): Modeline "1920x1080"x0.0 297.00 1920 2448 2492 2640 1080 1084 1094 1125 +hsync +vsync (112.5 kHz e) [ 130.969] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 130.969] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 130.969] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 130.969] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 130.969] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 130.969] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 130.969] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 130.969] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 130.969] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 130.969] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 130.969] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 130.969] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 130.969] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 130.969] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 130.969] (II) modeset(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 130.969] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 130.969] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 130.969] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e) [ 130.969] (--) modeset(0): HDMI max TMDS frequency 340000KHz [ 137.196] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 137.196] (II) No input driver specified, ignoring this device. [ 137.196] (II) This device may have been added with another device file. [ 137.205] (II) config/udev: removing device Video Bus [ 137.206] (II) event7 - Video Bus: device removed [ 137.222] (II) UnloadModule: "libinput" [ 137.223] (II) config/udev: Adding input device Video Bus (/dev/input/event7) [ 137.223] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 137.223] (**) Video Bus: Applying InputClass "system-keyboard" [ 137.223] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 137.223] (II) Using input driver 'libinput' for 'Video Bus' [ 137.223] (**) Video Bus: always reports core events [ 137.223] (**) Option "Device" "/dev/input/event7" [ 137.231] (II) event7 - Video Bus: is tagged by udev as: Keyboard [ 137.233] (II) event7 - Video Bus: device is a keyboard [ 137.233] (II) event7 - Video Bus: device removed [ 137.257] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7" [ 137.257] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 137.257] (**) Option "xkb_model" "pc105" [ 137.257] (**) Option "xkb_layout" "de" [ 137.257] (WW) Option "xkb_variant" requires a string value [ 137.259] (II) event7 - Video Bus: is tagged by udev as: Keyboard [ 137.259] (II) event7 - Video Bus: device is a keyboard [ 137.259] (II) config/udev: removing device Power Button [ 137.260] (II) event2 - Power Button: device removed [ 137.279] (II) UnloadModule: "libinput" [ 137.280] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 137.280] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 137.280] (**) Power Button: Applying InputClass "system-keyboard" [ 137.280] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 137.280] (II) Using input driver 'libinput' for 'Power Button' [ 137.280] (**) Power Button: always reports core events [ 137.280] (**) Option "Device" "/dev/input/event2" [ 137.282] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 137.282] (II) event2 - Power Button: device is a keyboard [ 137.282] (II) event2 - Power Button: device removed [ 137.293] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 137.293] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 137.293] (**) Option "xkb_model" "pc105" [ 137.293] (**) Option "xkb_layout" "de" [ 137.293] (WW) Option "xkb_variant" requires a string value [ 137.295] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 137.295] (II) event2 - Power Button: device is a keyboard [ 137.296] (II) config/udev: removing device Sleep Button [ 137.296] (II) event0 - Sleep Button: device removed [ 137.308] (II) UnloadModule: "libinput" [ 137.309] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 137.309] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 137.310] (**) Sleep Button: Applying InputClass "system-keyboard" [ 137.310] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 137.310] (II) Using input driver 'libinput' for 'Sleep Button' [ 137.310] (**) Sleep Button: always reports core events [ 137.310] (**) Option "Device" "/dev/input/event0" [ 137.311] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 137.311] (II) event0 - Sleep Button: device is a keyboard [ 137.312] (II) event0 - Sleep Button: device removed [ 137.322] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 137.322] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 137.322] (**) Option "xkb_model" "pc105" [ 137.322] (**) Option "xkb_layout" "de" [ 137.322] (WW) Option "xkb_variant" requires a string value [ 137.325] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 137.325] (II) event0 - Sleep Button: device is a keyboard [ 137.326] (II) config/udev: removing device Power Button [ 137.326] (II) event1 - Power Button: device removed [ 137.338] (II) UnloadModule: "libinput" [ 137.339] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 137.339] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 137.339] (**) Power Button: Applying InputClass "system-keyboard" [ 137.339] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 137.339] (II) Using input driver 'libinput' for 'Power Button' [ 137.339] (**) Power Button: always reports core events [ 137.339] (**) Option "Device" "/dev/input/event1" [ 137.340] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 137.340] (II) event1 - Power Button: device is a keyboard [ 137.341] (II) event1 - Power Button: device removed [ 137.352] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 137.352] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 137.352] (**) Option "xkb_model" "pc105" [ 137.352] (**) Option "xkb_layout" "de" [ 137.352] (WW) Option "xkb_variant" requires a string value [ 137.353] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 137.353] (II) event1 - Power Button: device is a keyboard [ 137.354] (II) config/udev: removing device Logitech USB Optical Mouse [ 137.354] (II) event3 - Logitech USB Optical Mouse: device removed [ 137.386] (II) UnloadModule: "libinput" [ 137.387] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3) [ 137.387] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall" [ 137.387] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall" [ 137.387] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse' [ 137.388] (**) Logitech USB Optical Mouse: always reports core events [ 137.388] (**) Option "Device" "/dev/input/event3" [ 137.390] (II) event3 - Logitech USB Optical Mouse: is tagged by udev as: Mouse [ 137.390] (II) event3 - Logitech USB Optical Mouse: device is a pointer [ 137.390] (II) event3 - Logitech USB Optical Mouse: device removed [ 137.418] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 137.418] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 137.418] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 137.418] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:046D:C077.0001/input/input3/event3" [ 137.418] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10) [ 137.418] (**) Option "AccelerationScheme" "none" [ 137.419] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0 [ 137.419] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 137.419] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 137.422] (II) event3 - Logitech USB Optical Mouse: is tagged by udev as: Mouse [ 137.423] (II) event3 - Logitech USB Optical Mouse: device is a pointer [ 137.423] (II) config/udev: removing device Microsoft Wired Keyboard 600 [ 137.423] (II) event4 - Microsoft Wired Keyboard 600: device removed [ 137.442] (II) UnloadModule: "libinput" [ 137.443] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4) [ 137.443] (**) Microsoft Wired Keyboard 600: Applying InputClass "libinput keyboard catchall" [ 137.443] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard" [ 137.443] (**) Microsoft Wired Keyboard 600: Applying InputClass "libinput keyboard catchall" [ 137.443] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600' [ 137.443] (**) Microsoft Wired Keyboard 600: always reports core events [ 137.443] (**) Option "Device" "/dev/input/event4" [ 137.445] (II) event4 - Microsoft Wired Keyboard 600: is tagged by udev as: Keyboard [ 137.445] (II) event4 - Microsoft Wired Keyboard 600: device is a keyboard [ 137.445] (II) event4 - Microsoft Wired Keyboard 600: device removed [ 137.459] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/0003:045E:07F8.0002/input/input4/event4" [ 137.459] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 11) [ 137.459] (**) Option "xkb_model" "pc105" [ 137.459] (**) Option "xkb_layout" "de" [ 137.459] (WW) Option "xkb_variant" requires a string value [ 137.462] (II) event4 - Microsoft Wired Keyboard 600: is tagged by udev as: Keyboard [ 137.462] (II) event4 - Microsoft Wired Keyboard 600: device is a keyboard [ 137.464] (II) config/udev: removing device Microsoft Wired Keyboard 600 Consumer Control [ 137.466] (II) UnloadModule: "libinput" [ 137.466] (II) config/udev: removing device Microsoft Wired Keyboard 600 Consumer Control [ 137.466] (II) event5 - Microsoft Wired Keyboard 600 Consumer Control: device removed [ 137.484] (II) UnloadModule: "libinput" [ 137.485] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 Consumer Control (/dev/input/event5) [ 137.485] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 137.485] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "system-keyboard" [ 137.485] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 137.485] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600 Consumer Control' [ 137.485] (**) Microsoft Wired Keyboard 600 Consumer Control: always reports core events [ 137.485] (**) Option "Device" "/dev/input/event5" [ 137.487] (II) event5 - Microsoft Wired Keyboard 600 Consumer Control: is tagged by udev as: Keyboard [ 137.487] (II) event5 - Microsoft Wired Keyboard 600 Consumer Control: device is a keyboard [ 137.487] (II) event5 - Microsoft Wired Keyboard 600 Consumer Control: device removed [ 137.499] (II) libinput: Microsoft Wired Keyboard 600 Consumer Control: needs a virtual subdevice [ 137.499] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.1/0003:045E:07F8.0003/input/input5/event5" [ 137.499] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600 Consumer Control" (type: MOUSE, id 12) [ 137.499] (**) Option "AccelerationScheme" "none" [ 137.500] (**) Microsoft Wired Keyboard 600 Consumer Control: (accel) selected scheme none/0 [ 137.500] (**) Microsoft Wired Keyboard 600 Consumer Control: (accel) acceleration factor: 2.000 [ 137.500] (**) Microsoft Wired Keyboard 600 Consumer Control: (accel) acceleration threshold: 4 [ 137.503] (II) event5 - Microsoft Wired Keyboard 600 Consumer Control: is tagged by udev as: Keyboard [ 137.503] (II) event5 - Microsoft Wired Keyboard 600 Consumer Control: device is a keyboard [ 137.504] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 137.504] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "system-keyboard" [ 137.504] (**) Microsoft Wired Keyboard 600 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 137.504] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600 Consumer Control' [ 137.504] (**) Microsoft Wired Keyboard 600 Consumer Control: always reports core events [ 137.504] (**) Option "Device" "/dev/input/event5" [ 137.504] (II) libinput: Microsoft Wired Keyboard 600 Consumer Control: is a virtual subdevice [ 137.504] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.1/0003:045E:07F8.0003/input/input5/event5" [ 137.504] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600 Consumer Control" (type: KEYBOARD, id 14) [ 137.504] (**) Option "xkb_model" "pc105" [ 137.504] (**) Option "xkb_layout" "de" [ 137.504] (WW) Option "xkb_variant" requires a string value [ 137.504] (II) config/udev: removing device Microsoft Wired Keyboard 600 System Control [ 137.504] (II) event6 - Microsoft Wired Keyboard 600 System Control: device removed [ 137.529] (II) UnloadModule: "libinput" [ 137.530] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 System Control (/dev/input/event6) [ 137.531] (**) Microsoft Wired Keyboard 600 System Control: Applying InputClass "libinput keyboard catchall" [ 137.531] (**) Microsoft Wired Keyboard 600 System Control: Applying InputClass "system-keyboard" [ 137.531] (**) Microsoft Wired Keyboard 600 System Control: Applying InputClass "libinput keyboard catchall" [ 137.531] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600 System Control' [ 137.531] (**) Microsoft Wired Keyboard 600 System Control: always reports core events [ 137.531] (**) Option "Device" "/dev/input/event6" [ 137.532] (II) event6 - Microsoft Wired Keyboard 600 System Control: is tagged by udev as: Keyboard [ 137.533] (II) event6 - Microsoft Wired Keyboard 600 System Control: device is a keyboard [ 137.533] (II) event6 - Microsoft Wired Keyboard 600 System Control: device removed [ 137.549] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.1/0003:045E:07F8.0003/input/input6/event6" [ 137.549] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600 System Control" (type: KEYBOARD, id 13) [ 137.549] (**) Option "xkb_model" "pc105" [ 137.549] (**) Option "xkb_layout" "de" [ 137.549] (WW) Option "xkb_variant" requires a string value [ 137.553] (II) event6 - Microsoft Wired Keyboard 600 System Control: is tagged by udev as: Keyboard [ 137.553] (II) event6 - Microsoft Wired Keyboard 600 System Control: device is a keyboard [ 137.555] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10) [ 137.555] (II) No input driver specified, ignoring this device. [ 137.555] (II) This device may have been added with another device file. [ 137.555] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event13) [ 137.555] (II) No input driver specified, ignoring this device. [ 137.555] (II) This device may have been added with another device file. [ 137.555] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11) [ 137.555] (II) No input driver specified, ignoring this device. [ 137.555] (II) This device may have been added with another device file. [ 137.555] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9) [ 137.555] (II) No input driver specified, ignoring this device. [ 137.555] (II) This device may have been added with another device file. [ 137.556] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12) [ 137.556] (II) No input driver specified, ignoring this device. [ 137.556] (II) This device may have been added with another device file. [ 137.556] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8) [ 137.556] (II) No input driver specified, ignoring this device. [ 137.556] (II) This device may have been added with another device file.