[ 490.971] (--) Log file renamed from "/home/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" to "/home/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" [ 490.971] X.Org X Server 1.21.1.15 X Protocol Version 11, Revision 0 [ 490.971] Current Operating System: Linux XXX 6.8.12-valve11-1-neptune-68-g67d4ddfa283a #1 SMP PREEMPT_DYNAMIC Wed, 22 Jan 2025 02:53:06 +0000 x86_64 [ 490.971] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-neptune-68 console=tty1 rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 rd.systemd.gpt_auto=no log_buf_len=4M amd_iommu=off amdgpu.lockup_timeout=5000,10000,10000,5000 amdgpu.gttsize=8128 amdgpu.sched_hw_submission=4 audit=0 fbcon=rotate:1 fsck.mode=auto fsck.repair=preen loglevel=3 splash quiet plymouth.ignore-serial-consoles fbcon=vc:4-6 steamos.efi=PARTUUID=HASH_7E1-0475-21B0-3FF8-AC78D5ED59B3 [ 490.971] [ 490.971] Current version of pixman: 0.44.2 [ 490.971] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 490.971] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 490.971] (==) Log file: "/home/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX", Time: Fri Jan 31 16:27:07 2025 [ 490.971] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 490.972] (==) No Layout section. Using the first Screen section. [ 490.972] (**) |-->Screen "Default Screen" (0) [ 490.972] (**) | |-->Monitor "<default monitor>" [ 490.972] (==) No monitor specified for screen "Default Screen". Using a default monitor configuration. [ 490.972] (**) Allowing byte-swapped clients [ 490.972] (==) Automatically adding devices [ 490.972] (==) Automatically enabling devices [ 490.972] (==) Automatically adding GPU devices [ 490.972] (==) Automatically binding GPU devices [ 490.972] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 490.972] (WW) The directory "/usr/share/fonts/misc" does not exist. [ 490.972] Entry deleted from font path. [ 490.972] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF". [ 490.972] Entry deleted from font path. [ 490.972] (Run 'mkfontdir' on "/usr/share/fonts/TTF"). [ 490.972] (WW) The directory "/usr/share/fonts/OTF" does not exist. [ 490.972] Entry deleted from font path. [ 490.972] (WW) The directory "/usr/share/fonts/Type1" does not exist. [ 490.972] Entry deleted from font path. [ 490.972] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 490.972] Entry deleted from font path. [ 490.972] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 490.972] Entry deleted from font path. [ 490.972] (==) FontPath set to: [ 490.972] (==) ModulePath set to "/usr/lib/xorg/modules" [ 490.972] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 490.972] (II) Module ABI versions: [ 490.972] X.Org ANSI C Emulation: 0.4 [ 490.972] X.Org Video Driver: 25.2 [ 490.972] X.Org XInput driver : 24.4 [ 490.972] X.Org Server Extension : 10.0 [ 490.972] (++) using VT number 1 [ 490.973] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33 [ 490.974] (II) xfree86: Adding drm device (/dev/dri/card0) [ 490.974] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:04:00.0/drm/card0 [ 490.975] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 14 paused 0 [ 490.981] (--) PCI:*(4@0:0:0) 1002:1435:1002:0123 rev 174, Mem @ 0xf8e0000000/268435456, 0xf8f0000000/2097152, 0x80500000/524288, I/O @ 0x00001000/256 [ 490.982] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 490.982] (II) LoadModule: "glx" [ 490.982] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 490.985] (II) Module glx: vendor="X.Org Foundation" [ 490.985] compiled for 1.21.1.15, module version = 1.0.0 [ 490.985] ABI class: X.Org Server Extension, version 10.0 [ 490.985] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0 [ 490.985] loading driver: amdgpu [ 490.985] (==) Matched amdgpu as autoconfigured driver 0 [ 490.985] (==) Matched ati as autoconfigured driver 1 [ 490.985] (==) Matched modesetting as autoconfigured driver 2 [ 490.985] (==) Matched fbdev as autoconfigured driver 3 [ 490.985] (==) Matched vesa as autoconfigured driver 4 [ 490.985] (==) Assigned the driver to the xf86ConfigLayout [ 490.985] (II) LoadModule: "amdgpu" [ 490.985] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so [ 490.987] (II) Module amdgpu: vendor="X.Org Foundation" [ 490.987] compiled for 1.21.1.11, module version = 23.0.0 [ 490.987] Module class: X.Org Video Driver [ 490.987] ABI class: X.Org Video Driver, version 25.2 [ 490.987] (II) LoadModule: "ati" [ 490.987] (WW) Warning, couldn't open module ati [ 490.987] (EE) Failed to load module "ati" (module does not exist, 0) [ 490.987] (II) LoadModule: "modesetting" [ 490.987] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 490.988] (II) Module modesetting: vendor="X.Org Foundation" [ 490.988] compiled for 1.21.1.15, module version = 1.21.1 [ 490.988] Module class: X.Org Video Driver [ 490.988] ABI class: X.Org Video Driver, version 25.2 [ 490.988] (II) LoadModule: "fbdev" [ 490.988] (WW) Warning, couldn't open module fbdev [ 490.988] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 490.988] (II) LoadModule: "vesa" [ 490.988] (WW) Warning, couldn't open module vesa [ 490.988] (EE) Failed to load module "vesa" (module does not exist, 0) [ 490.988] (II) AMDGPU: Driver for AMD Radeon: All GPUs supported by the amdgpu kernel driver [ 490.988] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 490.988] (WW) Falling back to old probe method for modesetting [ 490.991] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 490.991] (II) AMDGPU(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 [ 490.991] (**) AMDGPU(0): Depth 24, (--) framebuffer bpp 32 [ 490.991] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 490.991] (==) AMDGPU(0): Default visual is TrueColor [ 490.991] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card0 [ 490.991] (==) AMDGPU(0): RGB weight 888 [ 490.991] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC) [ 490.991] (--) AMDGPU(0): Chipset: "AMD Custom GPU 0932" (ChipID = 0x1435) [ 490.991] (II) Loading sub module "fb" [ 490.991] (II) LoadModule: "fb" [ 490.991] (II) Module "fb" already built-in [ 490.991] (II) Loading sub module "dri2" [ 490.991] (II) LoadModule: "dri2" [ 490.991] (II) Module "dri2" already built-in [ 491.015] (II) Loading sub module "glamoregl" [ 491.015] (II) LoadModule: "glamoregl" [ 491.016] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 491.020] (II) Module glamoregl: vendor="X.Org Foundation" [ 491.020] compiled for 1.21.1.15, module version = 1.0.1 [ 491.020] ABI class: X.Org ANSI C Emulation, version 0.4 [ 491.027] (II) AMDGPU(0): glamor X acceleration enabled on AMD Custom GPU 0932 (radeonsi, vangogh, LLVM 18.1.8, DRM 3.57, 6.8.12-valve11-1-neptune-68-g67d4ddfa283a) [ 491.027] (II) AMDGPU(0): glamor detected, initialising EGL layer. [ 491.027] (==) AMDGPU(0): TearFree property default: auto [ 491.027] (==) AMDGPU(0): VariableRefresh: disabled [ 491.027] (==) AMDGPU(0): AsyncFlipSecondaries: disabled [ 491.027] (II) AMDGPU(0): KMS Pageflipping: enabled [ 491.029] (II) AMDGPU(0): Output eDP has no monitor section [ 491.029] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section [ 491.037] (**) AMDGPU(0): Option "NoOutputInitialSize" "1920 1080" [ 491.039] (II) AMDGPU(0): EDID for output eDP [ 491.039] (II) AMDGPU(0): Manufacturer: VLV Model: 3003 Serial#: ... [ 491.039] (II) AMDGPU(0): Year: 2022 Week: 255 [ 491.039] (II) AMDGPU(0): EDID Version: 1.4 [ 491.039] (II) AMDGPU(0): Digital Display Input [ 491.039] (II) AMDGPU(0): 8 bits per channel [ 491.039] (II) AMDGPU(0): Digital interface is DisplayPort [ 491.039] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 10 vert.: 16 [ 491.039] (II) AMDGPU(0): Gamma: 2.20 [ 491.039] (II) AMDGPU(0): No DPMS capabilities specified [ 491.039] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:2:2 [ 491.039] (II) AMDGPU(0): Default color space is primary color space [ 491.039] (II) AMDGPU(0): First detailed timing is preferred mode [ 491.039] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate [ 491.039] (II) AMDGPU(0): Display is continuous-frequency [ 491.039] (II) AMDGPU(0): redX: 0.680 redY: 0.319 greenX: 0.237 greenY: 0.723 [ 491.039] (II) AMDGPU(0): blueX: 0.138 blueY: 0.050 whiteX: 0.312 whiteY: 0.329 [ 491.039] (II) AMDGPU(0): Manufacturer's mask: 0 [ 491.039] (II) AMDGPU(0): Supported detailed timing: [ 491.039] (II) AMDGPU(0): clock: 133.2 MHz Image Size: 100 x 160 mm [ 491.039] (II) AMDGPU(0): h_active: 800 h_sync: 1076 h_sync_end 1084 h_blank_end 1128 h_border: 0 [ 491.039] (II) AMDGPU(0): v_active: 1280 v_sync: 1289 v_sync_end 1290 v_blanking: 1312 v_border: 0 [ 491.039] (II) AMDGPU(0): Monitor name: ANX7530 U [ 491.039] (II) AMDGPU(0): Ranges: V min: 45 V max: 90 Hz, H min: 118 H max: 119 kHz, PixClock max 145 MHz [ 491.039] (II) AMDGPU(0): Number of EDID sections to follow: 1 [ 491.039] (II) AMDGPU(0): EDID (in hex): [ 491.039] (II) AMDGPU(0): 00ffffffffffff005996033001000000 [ 491.039] (II) AMDGPU(0): ff200104a50a1078173c71ae513cb923 [ 491.039] (II) AMDGPU(0): 0c505400000001010101010101010101 [ 491.039] (II) AMDGPU(0): 01010101010108342048310020501408 [ 491.039] (II) AMDGPU(0): 914064a00000001e000000fc00414e58 [ 491.039] (II) AMDGPU(0): 3735333020550a202020000000fd002d [ 491.039] (II) AMDGPU(0): 5a76770e000a20202020202000000010 [ 491.039] (II) AMDGPU(0): 000000000000000000000000000001ae [ 491.039] (II) AMDGPU(0): 02030b00e60601016a6a030000000000 [ 491.039] (II) AMDGPU(0): 00000000000000000000000000000000 [ 491.039] (II) AMDGPU(0): 00000000000000000000000000000000 [ 491.039] (II) AMDGPU(0): 00000000000000000000000000000000 [ 491.039] (II) AMDGPU(0): 00000000000000000000000000000000 [ 491.039] (II) AMDGPU(0): 00000000000000000000000000000000 [ 491.039] (II) AMDGPU(0): 00000000000000000000000000000000 [ 491.039] (II) AMDGPU(0): 0000000000000000000000000000002b [ 491.039] (II) AMDGPU(0): Printing probed modes for output eDP [ 491.039] (II) AMDGPU(0): Modeline "800x1280"x90.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 491.039] (II) AMDGPU(0): EDID for output DisplayPort-0 [ 491.039] (II) AMDGPU(0): Output eDP connected [ 491.039] (II) AMDGPU(0): Output DisplayPort-0 disconnected [ 491.039] (II) AMDGPU(0): Using exact sizes for initial modes [ 491.039] (II) AMDGPU(0): Output eDP using initial mode 800x1280 +0+0 [ 491.039] (II) AMDGPU(0): mem size init: gart size :1fb29c000 vram size: s:3e45e000 visible:3e45e000 [ 491.039] (==) AMDGPU(0): DPI set to (96, 96) [ 491.039] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0) [ 491.039] (II) Loading sub module "ramdac" [ 491.039] (II) LoadModule: "ramdac" [ 491.039] (II) Module "ramdac" already built-in [ 491.039] (II) UnloadModule: "modesetting" [ 491.039] (II) Unloading modesetting [ 491.039] (II) AMDGPU(0): [DRI2] Setup complete [ 491.039] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi [ 491.039] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi [ 491.051] (II) AMDGPU(0): Front buffer pitch: 3584 bytes [ 491.051] (II) AMDGPU(0): SYNC extension fences enabled [ 491.051] (II) AMDGPU(0): Present extension enabled [ 491.051] (==) AMDGPU(0): DRI3 enabled [ 491.051] (==) AMDGPU(0): Backing store enabled [ 491.051] (II) AMDGPU(0): Direct rendering enabled [ 491.058] (II) AMDGPU(0): Use GLAMOR acceleration. [ 491.058] (II) AMDGPU(0): Acceleration enabled [ 491.058] (==) AMDGPU(0): DPMS enabled [ 491.058] (==) AMDGPU(0): Silken mouse enabled [ 491.058] (II) AMDGPU(0): Set up textured video (glamor) [ 491.071] (WW) AMDGPU(0): Option "HotplugDriver" is not used [ 491.071] (WW) AMDGPU(0): Option "AllowEmptyInitialConfiguration" is not used [ 491.071] (II) Initializing extension Generic Event Extension [ 491.071] (II) Initializing extension SHAPE [ 491.071] (II) Initializing extension MIT-SHM [ 491.071] (II) Initializing extension XInputExtension [ 491.071] (II) Initializing extension XTEST [ 491.071] (II) Initializing extension BIG-REQUESTS [ 491.071] (II) Initializing extension SYNC [ 491.071] (II) Initializing extension XKEYBOARD [ 491.071] (II) Initializing extension XC-MISC [ 491.072] (II) Initializing extension SECURITY [ 491.072] (II) Initializing extension XFIXES [ 491.072] (II) Initializing extension RENDER [ 491.072] (II) Initializing extension RANDR [ 491.072] (II) Initializing extension COMPOSITE [ 491.072] (II) Initializing extension DAMAGE [ 491.072] (II) Initializing extension MIT-SCREEN-SAVER [ 491.072] (II) Initializing extension DOUBLE-BUFFER [ 491.072] (II) Initializing extension RECORD [ 491.072] (II) Initializing extension DPMS [ 491.072] (II) Initializing extension Present [ 491.072] (II) Initializing extension DRI3 [ 491.072] (II) Initializing extension X-Resource [ 491.073] (II) Initializing extension XVideo [ 491.073] (II) Initializing extension XVideo-MotionCompensation [ 491.073] (II) Initializing extension GLX [ 491.077] (II) AIGLX: Loaded and initialized radeonsi [ 491.077] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 491.077] (II) Initializing extension XFree86-VidModeExtension [ 491.077] (II) Initializing extension XFree86-DGA [ 491.077] (II) Initializing extension XFree86-DRI [ 491.077] (II) Initializing extension DRI2 [ 491.078] (II) AMDGPU(0): Setting screen physical size to 211 x 338 [ 491.138] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 491.139] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 491.139] (II) LoadModule: "libinput" [ 491.139] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 491.141] (II) Module libinput: vendor="X.Org Foundation" [ 491.141] compiled for 1.21.1.13, module version = 1.5.0 [ 491.141] Module class: X.Org XInput Driver [ 491.141] ABI class: X.Org XInput driver, version 24.4 [ 491.141] (II) Using input driver 'libinput' for 'Power Button' [ 491.141] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 28 paused 0 [ 491.142] (**) Power Button: always reports core events [ 491.142] (**) Option "Device" "/dev/input/event2" [ 491.143] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 491.143] (II) event2 - Power Button: device is a keyboard [ 491.144] (II) event2 - Power Button: device removed [ 491.144] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 491.144] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 491.144] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 491.144] (II) event2 - Power Button: device is a keyboard [ 491.145] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 491.145] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 491.145] (II) Using input driver 'libinput' for 'Video Bus' [ 491.146] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 31 paused 0 [ 491.146] (**) Video Bus: always reports core events [ 491.146] (**) Option "Device" "/dev/input/event4" [ 491.147] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 491.147] (II) event4 - Video Bus: device is a keyboard [ 491.147] (II) event4 - Video Bus: device removed [ 491.147] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/LNXVIDEO:01/input/input4/event4" [ 491.147] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 491.148] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 491.148] (II) event4 - Video Bus: device is a keyboard [ 491.149] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 491.149] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 491.149] (II) Using input driver 'libinput' for 'Power Button' [ 491.150] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0 [ 491.150] (**) Power Button: always reports core events [ 491.150] (**) Option "Device" "/dev/input/event0" [ 491.150] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 491.150] (II) event0 - Power Button: device is a keyboard [ 491.150] (II) event0 - Power Button: device removed [ 491.150] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 491.150] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 491.151] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 491.151] (II) event0 - Power Button: device is a keyboard [ 491.152] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 491.152] (II) No input driver specified, ignoring this device. [ 491.152] (II) This device may have been added with another device file. [ 491.152] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event7) [ 491.152] (II) No input driver specified, ignoring this device. [ 491.152] (II) This device may have been added with another device file. [ 491.153] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event10) [ 491.153] (II) No input driver specified, ignoring this device. [ 491.153] (II) This device may have been added with another device file. [ 491.153] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event11) [ 491.153] (II) No input driver specified, ignoring this device. [ 491.153] (II) This device may have been added with another device file. [ 491.153] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event13) [ 491.153] (II) No input driver specified, ignoring this device. [ 491.153] (II) This device may have been added with another device file. [ 491.154] (II) config/udev: Adding input device Valve Software Steam Controller (/dev/input/event6) [ 491.154] (**) Valve Software Steam Controller: Applying InputClass "libinput pointer catchall" [ 491.154] (**) Valve Software Steam Controller: Applying InputClass "Pointer" [ 491.154] (II) Using input driver 'libinput' for 'Valve Software Steam Controller' [ 491.210] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 33 paused 0 [ 491.210] (**) Valve Software Steam Controller: always reports core events [ 491.210] (**) Option "Device" "/dev/input/event6" [ 491.212] (II) event6 - Valve Software Steam Controller: is tagged by udev as: Mouse [ 491.212] (II) event6 - Valve Software Steam Controller: device is a pointer [ 491.212] (II) event6 - Valve Software Steam Controller: device removed [ 491.212] (**) Option "AccelSpeed" "0" [ 491.212] (**) Option "AccelProfile" "flat" [ 491.212] (II) libinput: Valve Software Steam Controller: Step value 0 was provided, libinput Fallback acceleration function is used. [ 491.212] (II) libinput: Valve Software Steam Controller: Step value 0 was provided, libinput Fallback acceleration function is used. [ 491.212] (II) libinput: Valve Software Steam Controller: Step value 0 was provided, libinput Fallback acceleration function is used. [ 491.212] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-3/3-3:1.0/0003:28DE:1205.0001/input/input15/event6" [ 491.212] (II) XINPUT: Adding extended input device "Valve Software Steam Controller" (type: MOUSE, id 9) [ 491.212] (**) Option "AccelerationScheme" "none" [ 491.212] (**) Valve Software Steam Controller: (accel) selected scheme none/0 [ 491.212] (**) Valve Software Steam Controller: (accel) acceleration factor: 2.000 [ 491.212] (**) Valve Software Steam Controller: (accel) acceleration threshold: 4 [ 491.214] (II) event6 - Valve Software Steam Controller: is tagged by udev as: Mouse [ 491.214] (II) event6 - Valve Software Steam Controller: device is a pointer [ 491.215] (II) config/udev: Adding input device Valve Software Steam Controller (/dev/input/mouse0) [ 491.215] (**) Valve Software Steam Controller: Applying InputClass "Pointer" [ 491.215] (II) Using input driver 'libinput' for 'Valve Software Steam Controller' [ 491.215] (**) Valve Software Steam Controller: always reports core events [ 491.215] (**) Option "Device" "/dev/input/mouse0" [ 491.215] (EE) xf86OpenSerial: Cannot open device /dev/input/mouse0 Permission denied. [ 491.215] (II) mouse0: opening input device '/dev/input/mouse0' failed (Permission denied). [ 491.215] (II) mouse0 - failed to create input device '/dev/input/mouse0'. [ 491.215] (EE) libinput: Valve Software Steam Controller: Failed to create a device for /dev/input/mouse0 [ 491.215] (EE) PreInit returned 2 for "Valve Software Steam Controller" [ 491.215] (II) UnloadModule: "libinput" [ 491.216] (II) config/udev: Adding input device Valve Software Steam Controller (/dev/input/event12) [ 491.216] (**) Valve Software Steam Controller: Applying InputClass "libinput keyboard catchall" [ 491.216] (II) Using input driver 'libinput' for 'Valve Software Steam Controller' [ 491.217] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 34 paused 0 [ 491.217] (**) Valve Software Steam Controller: always reports core events [ 491.217] (**) Option "Device" "/dev/input/event12" [ 491.218] (II) event12 - Valve Software Steam Controller: is tagged by udev as: Keyboard [ 491.218] (II) event12 - Valve Software Steam Controller: device is a keyboard [ 491.218] (II) event12 - Valve Software Steam Controller: device removed [ 491.218] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-3/3-3:1.1/0003:28DE:1205.0002/input/input16/event12" [ 491.218] (II) XINPUT: Adding extended input device "Valve Software Steam Controller" (type: KEYBOARD, id 10) [ 491.220] (II) event12 - Valve Software Steam Controller: is tagged by udev as: Keyboard [ 491.220] (II) event12 - Valve Software Steam Controller: device is a keyboard [ 491.221] (II) config/udev: Adding input device Steam Deck (/dev/input/event8) [ 491.221] (II) No input driver specified, ignoring this device. [ 491.221] (II) This device may have been added with another device file. [ 491.222] (II) config/udev: Adding input device Steam Deck (/dev/input/js0) [ 491.222] (II) No input driver specified, ignoring this device. [ 491.222] (II) This device may have been added with another device file. [ 491.222] (II) config/udev: Adding input device Steam Deck Motion Sensors (/dev/input/event9) [ 491.222] (II) No input driver specified, ignoring this device. [ 491.222] (II) This device may have been added with another device file. [ 491.223] (II) config/udev: Adding input device Steam Deck Motion Sensors (/dev/input/js1) [ 491.223] (II) No input driver specified, ignoring this device. [ 491.223] (II) This device may have been added with another device file. [ 491.224] (II) config/udev: Adding input device sof-nau8821-max Headset Jack (/dev/input/event14) [ 491.224] (**) sof-nau8821-max Headset Jack: Applying InputClass "libinput keyboard catchall" [ 491.224] (II) Using input driver 'libinput' for 'sof-nau8821-max Headset Jack' [ 491.224] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 35 paused 0 [ 491.224] (**) sof-nau8821-max Headset Jack: always reports core events [ 491.224] (**) Option "Device" "/dev/input/event14" [ 491.225] (II) event14 - sof-nau8821-max Headset Jack: is tagged by udev as: Keyboard Switch [ 491.225] (II) event14 - sof-nau8821-max Headset Jack: device is a keyboard [ 491.226] (II) event14 - sof-nau8821-max Headset Jack: device removed [ 491.226] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:04:00.5/nau8821-max/sound/card1/input17/event14" [ 491.226] (II) XINPUT: Adding extended input device "sof-nau8821-max Headset Jack" (type: KEYBOARD, id 11) [ 491.227] (II) event14 - sof-nau8821-max Headset Jack: is tagged by udev as: Keyboard Switch [ 491.227] (II) event14 - sof-nau8821-max Headset Jack: device is a keyboard [ 491.227] (II) config/udev: Adding input device FTS3528:00 2808:1015 (/dev/input/event15) [ 491.227] (**) FTS3528:00 2808:1015: Applying InputClass "libinput touchscreen catchall" [ 491.227] (**) FTS3528:00 2808:1015: Applying InputClass "calibration" [ 491.227] (II) Using input driver 'libinput' for 'FTS3528:00 2808:1015' [ 491.228] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 36 paused 0 [ 491.228] (**) FTS3528:00 2808:1015: always reports core events [ 491.228] (**) Option "Device" "/dev/input/event15" [ 491.229] (II) event15 - FTS3528:00 2808:1015: is tagged by udev as: Touchscreen [ 491.229] (II) event15 - FTS3528:00 2808:1015: device is a touch device [ 491.230] (II) event15 - FTS3528:00 2808:1015: device removed [ 491.230] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:01/i2c-1/i2c-FTS3528:00/0018:2808:1015.0004/input/input20/event15" [ 491.230] (II) XINPUT: Adding extended input device "FTS3528:00 2808:1015" (type: TOUCHSCREEN, id 12) [ 491.230] (**) Option "AccelerationScheme" "none" [ 491.230] (**) FTS3528:00 2808:1015: (accel) selected scheme none/0 [ 491.230] (**) FTS3528:00 2808:1015: (accel) acceleration factor: 2.000 [ 491.230] (**) FTS3528:00 2808:1015: (accel) acceleration threshold: 4 [ 491.230] (**) Option "TransformationMatrix" "0 1 0 -1 0 1 0 0 1" [ 491.231] (II) event15 - FTS3528:00 2808:1015: is tagged by udev as: Touchscreen [ 491.231] (II) event15 - FTS3528:00 2808:1015: device is a touch device [ 491.231] (II) config/udev: Adding input device FTS3528:00 2808:1015 (/dev/input/mouse1) [ 491.231] (**) FTS3528:00 2808:1015: Applying InputClass "calibration" [ 491.231] (II) Using input driver 'libinput' for 'FTS3528:00 2808:1015' [ 491.231] (**) FTS3528:00 2808:1015: always reports core events [ 491.231] (**) Option "Device" "/dev/input/mouse1" [ 491.232] (EE) xf86OpenSerial: Cannot open device /dev/input/mouse1 Permission denied. [ 491.232] (II) mouse1: opening input device '/dev/input/mouse1' failed (Permission denied). [ 491.232] (II) mouse1 - failed to create input device '/dev/input/mouse1'. [ 491.232] (EE) libinput: FTS3528:00 2808:1015: Failed to create a device for /dev/input/mouse1 [ 491.232] (EE) PreInit returned 2 for "FTS3528:00 2808:1015" [ 491.232] (II) UnloadModule: "libinput" [ 491.232] (II) config/udev: Adding input device FTS3528:00 2808:1015 UNKNOWN (/dev/input/event16) [ 491.232] (**) FTS3528:00 2808:1015 UNKNOWN: Applying InputClass "libinput tablet catchall" [ 491.232] (**) FTS3528:00 2808:1015 UNKNOWN: Applying InputClass "calibration" [ 491.232] (II) Using input driver 'libinput' for 'FTS3528:00 2808:1015 UNKNOWN' [ 491.233] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 37 paused 0 [ 491.233] (**) FTS3528:00 2808:1015 UNKNOWN: always reports core events [ 491.233] (**) Option "Device" "/dev/input/event16" [ 491.234] (II) event16 - FTS3528:00 2808:1015 UNKNOWN: is tagged by udev as: Tablet [ 491.263] (II) event16 - FTS3528:00 2808:1015 UNKNOWN: device "FTS3528:00 2808:1015 UNKNOWN" (2808:1015) is not known to libwacom [ 491.264] (II) event16 - FTS3528:00 2808:1015 UNKNOWN: device is a tablet [ 491.264] (II) event16 - FTS3528:00 2808:1015 UNKNOWN: device removed [ 491.264] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:01/i2c-1/i2c-FTS3528:00/0018:2808:1015.0004/input/input22/event16" [ 491.264] (II) XINPUT: Adding extended input device "FTS3528:00 2808:1015 UNKNOWN" (type: TABLET, id 13) [ 491.265] (II) event16 - FTS3528:00 2808:1015 UNKNOWN: is tagged by udev as: Tablet [ 491.279] (II) event16 - FTS3528:00 2808:1015 UNKNOWN: device "FTS3528:00 2808:1015 UNKNOWN" (2808:1015) is not known to libwacom [ 491.279] (II) event16 - FTS3528:00 2808:1015 UNKNOWN: device is a tablet [ 491.280] (II) config/udev: Adding input device FTS3528:00 2808:1015 UNKNOWN (/dev/input/mouse2) [ 491.280] (**) FTS3528:00 2808:1015 UNKNOWN: Applying InputClass "calibration" [ 491.280] (II) Using input driver 'libinput' for 'FTS3528:00 2808:1015 UNKNOWN' [ 491.280] (**) FTS3528:00 2808:1015 UNKNOWN: always reports core events [ 491.280] (**) Option "Device" "/dev/input/mouse2" [ 491.280] (EE) xf86OpenSerial: Cannot open device /dev/input/mouse2 Permission denied. [ 491.280] (II) mouse2: opening input device '/dev/input/mouse2' failed (Permission denied). [ 491.280] (II) mouse2 - failed to create input device '/dev/input/mouse2'. [ 491.280] (EE) libinput: FTS3528:00 2808:1015 UNKNOWN: Failed to create a device for /dev/input/mouse2 [ 491.280] (EE) PreInit returned 2 for "FTS3528:00 2808:1015 UNKNOWN" [ 491.280] (II) UnloadModule: "libinput" [ 491.280] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5) [ 491.280] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 491.280] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 491.281] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 39 paused 0 [ 491.281] (**) AT Translated Set 2 keyboard: always reports core events [ 491.281] (**) Option "Device" "/dev/input/event5" [ 491.282] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 491.282] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard [ 491.283] (II) event5 - AT Translated Set 2 keyboard: device removed [ 491.283] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5" [ 491.283] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14) [ 491.284] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 491.284] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard [ 491.285] (II) config/udev: Adding input device PC Speaker (/dev/input/event3) [ 491.285] (II) No input driver specified, ignoring this device. [ 491.285] (II) This device may have been added with another device file. [ 491.637] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counter [ 491.638] (II) AMDGPU(0): Allocate new frame buffer 1280x800 [ 491.638] (II) AMDGPU(0): => pitch 5120 bytes [ 491.842] (II) event6 - Valve Software Steam Controller: SYN_DROPPED event - some input events have been lost. [ 491.845] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 491.845] (II) AMDGPU(0): Using EDID range info for horizontal sync [ 491.845] (II) AMDGPU(0): Using EDID range info for vertical refresh [ 491.845] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 491.845] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 492.850] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 492.850] (II) AMDGPU(0): Using hsync ranges from config file [ 492.850] (II) AMDGPU(0): Using vrefresh ranges from config file [ 492.850] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 492.850] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 493.337] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 493.337] (II) AMDGPU(0): Using hsync ranges from config file [ 493.338] (II) AMDGPU(0): Using vrefresh ranges from config file [ 493.338] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 493.338] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 496.479] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 496.479] (II) AMDGPU(0): Using hsync ranges from config file [ 496.479] (II) AMDGPU(0): Using vrefresh ranges from config file [ 496.479] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 496.479] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 496.566] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 496.566] (II) AMDGPU(0): Using hsync ranges from config file [ 496.566] (II) AMDGPU(0): Using vrefresh ranges from config file [ 496.566] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 496.566] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 498.850] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js0) [ 498.850] (II) No input driver specified, ignoring this device. [ 498.851] (II) This device may have been added with another device file. [ 498.924] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event8) [ 498.924] (II) No input driver specified, ignoring this device. [ 498.924] (II) This device may have been added with another device file. [ 504.380] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 504.381] (II) AMDGPU(0): Using hsync ranges from config file [ 504.381] (II) AMDGPU(0): Using vrefresh ranges from config file [ 504.381] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 504.381] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 504.383] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 504.383] (II) AMDGPU(0): Using hsync ranges from config file [ 504.383] (II) AMDGPU(0): Using vrefresh ranges from config file [ 504.383] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 504.383] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 504.413] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 504.413] (II) AMDGPU(0): Using hsync ranges from config file [ 504.413] (II) AMDGPU(0): Using vrefresh ranges from config file [ 504.413] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 504.413] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 504.415] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 504.415] (II) AMDGPU(0): Using hsync ranges from config file [ 504.415] (II) AMDGPU(0): Using vrefresh ranges from config file [ 504.415] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 504.415] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 507.687] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 507.687] (II) AMDGPU(0): Using hsync ranges from config file [ 507.687] (II) AMDGPU(0): Using vrefresh ranges from config file [ 507.687] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 507.687] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 507.689] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 507.689] (II) AMDGPU(0): Using hsync ranges from config file [ 507.689] (II) AMDGPU(0): Using vrefresh ranges from config file [ 507.689] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 507.689] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 511.469] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 511.469] (II) AMDGPU(0): Using hsync ranges from config file [ 511.469] (II) AMDGPU(0): Using vrefresh ranges from config file [ 511.469] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 511.469] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 511.472] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 511.472] (II) AMDGPU(0): Using hsync ranges from config file [ 511.472] (II) AMDGPU(0): Using vrefresh ranges from config file [ 511.472] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 511.472] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 511.501] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 511.501] (II) AMDGPU(0): Using hsync ranges from config file [ 511.501] (II) AMDGPU(0): Using vrefresh ranges from config file [ 511.501] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 511.501] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 511.504] (II) AMDGPU(0): EDID vendor "VLV", prod id 12291 [ 511.504] (II) AMDGPU(0): Using hsync ranges from config file [ 511.504] (II) AMDGPU(0): Using vrefresh ranges from config file [ 511.504] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 511.504] (II) AMDGPU(0): Modeline "800x1280"x0.0 133.20 800 1076 1084 1128 1280 1289 1290 1312 +hsync +vsync (118.1 kHz eP) [ 514.882] (II) config/udev: Adding input device Steam Deck Motion Sensors (/dev/input/js1) [ 514.882] (II) No input driver specified, ignoring this device. [ 514.882] (II) This device may have been added with another device file. [ 514.883] (II) config/udev: Adding input device Steam Deck (/dev/input/js0) [ 514.883] (II) No input driver specified, ignoring this device. [ 514.883] (II) This device may have been added with another device file. [ 514.927] (II) config/udev: Adding input device Steam Deck (/dev/input/event8) [ 514.927] (II) No input driver specified, ignoring this device. [ 514.927] (II) This device may have been added with another device file. [ 514.928] (II) config/udev: Adding input device Steam Deck Motion Sensors (/dev/input/event9) [ 514.928] (II) No input driver specified, ignoring this device. [ 514.928] (II) This device may have been added with another device file.