[ 7.193] X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 [ 7.193] Current Operating System: Linux XXX 6.9.3-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Fri, 31 May 2024 15:14:26 +0000 x86_64 [ 7.193] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=UUID=HASH_174-A230-EF0B-0C3E-F6C2C86ED4B5 rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet [ 7.193] [ 7.193] Current version of pixman: 0.43.4 [ 7.193] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 7.193] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 7.193] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 15 17:27:58 2024 [ 7.196] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 7.196] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 7.197] (==) No Layout section. Using the first Screen section. [ 7.197] (==) No screen section available. Using defaults. [ 7.197] (**) |-->Screen "Default Screen Section" (0) [ 7.197] (**) | |-->Monitor "<default monitor>" [ 7.198] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 7.198] (**) Allowing byte-swapped clients [ 7.198] (==) Automatically adding devices [ 7.198] (==) Automatically enabling devices [ 7.198] (==) Automatically adding GPU devices [ 7.198] (==) Automatically binding GPU devices [ 7.198] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 7.198] (WW) The directory "/usr/share/fonts/misc" does not exist. [ 7.198] Entry deleted from font path. [ 7.199] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF". [ 7.199] Entry deleted from font path. [ 7.199] (Run 'mkfontdir' on "/usr/share/fonts/TTF"). [ 7.199] (WW) The directory "/usr/share/fonts/OTF" does not exist. [ 7.199] Entry deleted from font path. [ 7.199] (WW) The directory "/usr/share/fonts/Type1" does not exist. [ 7.199] Entry deleted from font path. [ 7.199] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 7.199] Entry deleted from font path. [ 7.199] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 7.199] Entry deleted from font path. [ 7.199] (==) FontPath set to: [ 7.199] (==) ModulePath set to "/usr/lib/xorg/modules" [ 7.199] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 7.199] (II) Module ABI versions: [ 7.199] X.Org ANSI C Emulation: 0.4 [ 7.199] X.Org Video Driver: 25.2 [ 7.199] X.Org XInput driver : 24.4 [ 7.199] X.Org Server Extension : 10.0 [ 7.199] (++) using VT number 7 [ 7.199] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 7.200] (II) xfree86: Adding drm device (/dev/dri/card0) [ 7.200] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.0/drm/card0 [ 7.229] (--) PCI:*(197@0:0:0) 1002:15bf:1f4c:b002 rev 193, Mem @ 0x7c00000000/268435456, 0xdc000000/2097152, 0xdc500000/524288, I/O @ 0x0000e000/256 [ 7.229] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 7.229] (II) LoadModule: "glx" [ 7.230] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 7.236] (II) Module glx: vendor="X.Org Foundation" [ 7.236] compiled for 1.21.1.13, module version = 1.0.0 [ 7.236] ABI class: X.Org Server Extension, version 10.0 [ 7.236] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0 [ 7.236] loading driver: amdgpu [ 7.236] (==) Matched amdgpu as autoconfigured driver 0 [ 7.236] (==) Matched ati as autoconfigured driver 1 [ 7.236] (==) Matched modesetting as autoconfigured driver 2 [ 7.236] (==) Matched fbdev as autoconfigured driver 3 [ 7.236] (==) Matched vesa as autoconfigured driver 4 [ 7.236] (==) Assigned the driver to the xf86ConfigLayout [ 7.236] (II) LoadModule: "amdgpu" [ 7.236] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so [ 7.240] (II) Module amdgpu: vendor="X.Org Foundation" [ 7.240] compiled for 1.21.1.11, module version = 23.0.0 [ 7.240] Module class: X.Org Video Driver [ 7.240] ABI class: X.Org Video Driver, version 25.2 [ 7.240] (II) LoadModule: "ati" [ 7.240] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 7.240] (II) Module ati: vendor="X.Org Foundation" [ 7.240] compiled for 1.21.1.11, module version = 22.0.0 [ 7.240] Module class: X.Org Video Driver [ 7.240] ABI class: X.Org Video Driver, version 25.2 [ 7.274] (II) LoadModule: "modesetting" [ 7.274] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 7.275] (II) Module modesetting: vendor="X.Org Foundation" [ 7.275] compiled for 1.21.1.13, module version = 1.21.1 [ 7.275] Module class: X.Org Video Driver [ 7.275] ABI class: X.Org Video Driver, version 25.2 [ 7.275] (II) LoadModule: "fbdev" [ 7.275] (WW) Warning, couldn't open module fbdev [ 7.275] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 7.275] (II) LoadModule: "vesa" [ 7.275] (WW) Warning, couldn't open module vesa [ 7.275] (EE) Failed to load module "vesa" (module does not exist, 0) [ 7.275] (II) AMDGPU: Driver for AMD Radeon: All GPUs supported by the amdgpu kernel driver [ 7.275] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 7.298] (WW) Falling back to old probe method for modesetting [ 7.298] (II) AMDGPU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 7.298] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32 [ 7.298] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 7.298] (==) AMDGPU(0): Default visual is TrueColor [ 7.298] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card0 [ 7.298] (==) AMDGPU(0): RGB weight 888 [ 7.298] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC) [ 7.298] (--) AMDGPU(0): Chipset: "AMD Radeon 780M" (ChipID = 0x15bf) [ 7.299] (II) Loading sub module "fb" [ 7.299] (II) LoadModule: "fb" [ 7.299] (II) Module "fb" already built-in [ 7.299] (II) Loading sub module "dri2" [ 7.299] (II) LoadModule: "dri2" [ 7.299] (II) Module "dri2" already built-in [ 7.449] (II) Loading sub module "glamoregl" [ 7.449] (II) LoadModule: "glamoregl" [ 7.449] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 7.454] (II) Module glamoregl: vendor="X.Org Foundation" [ 7.454] compiled for 1.21.1.13, module version = 1.0.1 [ 7.454] ABI class: X.Org ANSI C Emulation, version 0.4 [ 7.469] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon 780M (radeonsi, gfx1103_r1, LLVM 17.0.6, DRM 3.57, 6.9.3-zen1-1-zen) [ 7.469] (II) AMDGPU(0): glamor detected, initialising EGL layer. [ 7.469] (==) AMDGPU(0): TearFree property default: auto [ 7.469] (==) AMDGPU(0): VariableRefresh: disabled [ 7.469] (==) AMDGPU(0): AsyncFlipSecondaries: disabled [ 7.469] (II) AMDGPU(0): KMS Pageflipping: enabled [ 7.473] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section [ 7.473] (II) AMDGPU(0): Output HDMI-A-1 has no monitor section [ 7.473] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section [ 7.473] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section [ 7.473] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section [ 7.473] (II) AMDGPU(0): Output DisplayPort-3 has no monitor section [ 7.473] (II) AMDGPU(0): Output DisplayPort-4 has no monitor section [ 7.473] (II) AMDGPU(0): Output DisplayPort-5 has no monitor section [ 7.473] (II) AMDGPU(0): Output DisplayPort-6 has no monitor section [ 7.474] (WW) AMDGPU(0): 9 ZaphodHeads crtcs unavailable. Some outputs will stay off. [ 7.478] (II) AMDGPU(0): EDID for output HDMI-A-0 [ 7.478] (II) AMDGPU(0): Manufacturer: UTV Model: 30 Serial#: ... [ 7.478] (II) AMDGPU(0): Year: 2021 Week: 46 [ 7.478] (II) AMDGPU(0): EDID Version: 1.3 [ 7.478] (II) AMDGPU(0): Digital Display Input [ 7.478] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 115 vert.: 65 [ 7.478] (II) AMDGPU(0): Gamma: 2.20 [ 7.478] (II) AMDGPU(0): No DPMS capabilities specified [ 7.478] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 7.478] (II) AMDGPU(0): First detailed timing is preferred mode [ 7.478] (II) AMDGPU(0): redX: 0.640 redY: 0.340 greenX: 0.300 greenY: 0.690 [ 7.479] (II) AMDGPU(0): blueX: 0.138 blueY: 0.038 whiteX: 0.282 whiteY: 0.297 [ 7.479] (II) AMDGPU(0): Supported established timings: [ 7.479] (II) AMDGPU(0): 640x480@60Hz [ 7.479] (II) AMDGPU(0): 800x600@60Hz [ 7.479] (II) AMDGPU(0): 1024x768@60Hz [ 7.479] (II) AMDGPU(0): Manufacturer's mask: 0 [ 7.479] (II) AMDGPU(0): Supported standard timings: [ 7.479] (II) AMDGPU(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 7.479] (II) AMDGPU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 7.479] (II) AMDGPU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 7.479] (II) AMDGPU(0): Supported detailed timing: [ 7.479] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 1152 x 648 mm [ 7.479] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 7.479] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 7.479] (II) AMDGPU(0): Supported detailed timing: [ 7.479] (II) AMDGPU(0): clock: 84.8 MHz Image Size: 580 x 330 mm [ 7.479] (II) AMDGPU(0): h_active: 1360 h_sync: 1432 h_sync_end 1568 h_blank_end 1776 h_border: 0 [ 7.479] (II) AMDGPU(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 798 v_border: 0 [ 7.479] (II) AMDGPU(0): Monitor name: MONITOR [ 7.479] (II) AMDGPU(0): Ranges: V min: 50 V max: 75 Hz, H min: 15 H max: 69 kHz, PixClock max 155 MHz [ 7.479] (II) AMDGPU(0): Supported detailed timing: [ 7.479] (II) AMDGPU(0): clock: 27.0 MHz Image Size: 708 x 398 mm [ 7.479] (II) AMDGPU(0): h_active: 525 h_sync: 541 h_sync_end 603 h_blank_end 663 h_border: 0 [ 7.479] (II) AMDGPU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0 [ 7.479] (II) AMDGPU(0): Supported detailed timing: [ 7.479] (II) AMDGPU(0): clock: 27.0 MHz Image Size: 708 x 398 mm [ 7.479] (II) AMDGPU(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0 [ 7.479] (II) AMDGPU(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0 [ 7.479] (II) AMDGPU(0): Supported detailed timing: [ 7.479] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 708 x 398 mm [ 7.479] (II) AMDGPU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0 [ 7.479] (II) AMDGPU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 7.479] (II) AMDGPU(0): Number of EDID sections to follow: 1 [ 7.479] (II) AMDGPU(0): EDID (in hex): [ 7.479] (II) AMDGPU(0): 00ffffffffffff005696300001000000 [ 7.479] (II) AMDGPU(0): 2e1f0103807341780acf74a3574cb023 [ 7.479] (II) AMDGPU(0): 09484c21080081c08140818001010101 [ 7.479] (II) AMDGPU(0): 010101010101023a801871382d40582c [ 7.479] (II) AMDGPU(0): 450080884200001e1b2150a051001e30 [ 7.479] (II) AMDGPU(0): 48883500444a2100001c000000fc004d [ 7.479] (II) AMDGPU(0): 4f4e49544f520a2020202020000000fd [ 7.479] (II) AMDGPU(0): 00324b0f450f000a2020202020200187 [ 7.479] (II) AMDGPU(0): 020327714c900204051f131422112021 [ 7.479] (II) AMDGPU(0): 01290907031507505704008301000067 [ 7.479] (II) AMDGPU(0): 030c001000382d8c0a0d8a20e02d1010 [ 7.479] (II) AMDGPU(0): 3e9600c48e210000188c0ad090204031 [ 7.479] (II) AMDGPU(0): 200c405500c48e21000018011d00bc52 [ 7.479] (II) AMDGPU(0): d01e20b8285540c48e2100001e000000 [ 7.479] (II) AMDGPU(0): 00000000000000000000000000000000 [ 7.479] (II) AMDGPU(0): 00000000000000000000000000000063 [ 7.479] (--) AMDGPU(0): HDMI max TMDS frequency 225000KHz [ 7.479] (II) AMDGPU(0): Printing probed modes for output HDMI-A-0 [ 7.479] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 7.479] (II) AMDGPU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1920x1080"x25.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1680x1050"x60.0 148.50 1680 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1440x900"x60.0 148.50 1440 2008 2052 2200 900 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 776 798 -hsync +vsync (47.7 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1280x800"x60.0 148.50 1280 2008 2052 2200 800 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 7.479] (II) AMDGPU(0): Modeline "525x480"x77.6 27.00 525 541 603 663 480 489 495 525 -hsync -vsync (40.7 kHz e) [ 7.479] (II) AMDGPU(0): EDID for output HDMI-A-1 [ 7.479] (II) AMDGPU(0): EDID for output DisplayPort-0 [ 7.479] (II) AMDGPU(0): EDID for output DisplayPort-1 [ 7.479] (II) AMDGPU(0): EDID for output DisplayPort-2 [ 7.479] (II) AMDGPU(0): EDID for output DisplayPort-3 [ 7.479] (II) AMDGPU(0): EDID for output DisplayPort-4 [ 7.479] (II) AMDGPU(0): EDID for output DisplayPort-5 [ 7.479] (II) AMDGPU(0): EDID for output DisplayPort-6 [ 7.479] (II) AMDGPU(0): Output HDMI-A-0 connected [ 7.479] (II) AMDGPU(0): Output HDMI-A-1 disconnected [ 7.479] (II) AMDGPU(0): Output DisplayPort-0 disconnected [ 7.479] (II) AMDGPU(0): Output DisplayPort-1 disconnected [ 7.479] (II) AMDGPU(0): Output DisplayPort-2 disconnected [ 7.479] (II) AMDGPU(0): Output DisplayPort-3 disconnected [ 7.479] (II) AMDGPU(0): Output DisplayPort-4 disconnected [ 7.479] (II) AMDGPU(0): Output DisplayPort-5 disconnected [ 7.479] (II) AMDGPU(0): Output DisplayPort-6 disconnected [ 7.479] (II) AMDGPU(0): Using exact sizes for initial modes [ 7.479] (II) AMDGPU(0): Output HDMI-A-0 using initial mode 1920x1080 +0+0 [ 7.479] (II) AMDGPU(0): mem size init: gart size :790d2f000 vram size: s:7a141000 visible:7a141000 [ 7.479] (==) AMDGPU(0): DPI set to (96, 96) [ 7.479] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0) [ 7.479] (II) Loading sub module "ramdac" [ 7.479] (II) LoadModule: "ramdac" [ 7.479] (II) Module "ramdac" already built-in [ 7.479] (II) UnloadModule: "modesetting" [ 7.479] (II) Unloading modesetting [ 7.479] (II) AMDGPU(0): [DRI2] Setup complete [ 7.479] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi [ 7.479] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi [ 7.529] (II) AMDGPU(0): Front buffer pitch: 7680 bytes [ 7.530] (II) AMDGPU(0): SYNC extension fences enabled [ 7.530] (II) AMDGPU(0): Present extension enabled [ 7.530] (==) AMDGPU(0): DRI3 enabled [ 7.530] (==) AMDGPU(0): Backing store enabled [ 7.530] (II) AMDGPU(0): Direct rendering enabled [ 7.542] (II) AMDGPU(0): Use GLAMOR acceleration. [ 7.542] (II) AMDGPU(0): Acceleration enabled [ 7.542] (==) AMDGPU(0): DPMS enabled [ 7.542] (==) AMDGPU(0): Silken mouse enabled [ 7.542] (II) AMDGPU(0): Set up textured video (glamor) [ 7.558] (WW) AMDGPU(0): Option "HotplugDriver" is not used [ 7.558] (II) Initializing extension Generic Event Extension [ 7.558] (II) Initializing extension SHAPE [ 7.558] (II) Initializing extension MIT-SHM [ 7.559] (II) Initializing extension XInputExtension [ 7.559] (II) Initializing extension XTEST [ 7.559] (II) Initializing extension BIG-REQUESTS [ 7.559] (II) Initializing extension SYNC [ 7.559] (II) Initializing extension XKEYBOARD [ 7.559] (II) Initializing extension XC-MISC [ 7.559] (II) Initializing extension SECURITY [ 7.559] (II) Initializing extension XFIXES [ 7.559] (II) Initializing extension RENDER [ 7.559] (II) Initializing extension RANDR [ 7.559] (II) Initializing extension COMPOSITE [ 7.560] (II) Initializing extension DAMAGE [ 7.560] (II) Initializing extension MIT-SCREEN-SAVER [ 7.560] (II) Initializing extension DOUBLE-BUFFER [ 7.560] (II) Initializing extension RECORD [ 7.560] (II) Initializing extension DPMS [ 7.560] (II) Initializing extension Present [ 7.560] (II) Initializing extension DRI3 [ 7.560] (II) Initializing extension X-Resource [ 7.560] (II) Initializing extension XVideo [ 7.560] (II) Initializing extension XVideo-MotionCompensation [ 7.560] (II) Initializing extension GLX [ 7.562] (II) AIGLX: Loaded and initialized radeonsi [ 7.562] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 7.562] (II) Initializing extension XFree86-VidModeExtension [ 7.563] (II) Initializing extension XFree86-DGA [ 7.563] (II) Initializing extension XFree86-DRI [ 7.563] (II) Initializing extension DRI2 [ 7.563] (II) AMDGPU(0): Setting screen physical size to 508 x 285 [ 7.621] (II) config/udev: Adding input device Video Bus (/dev/input/event1) [ 7.621] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 7.621] (**) Video Bus: Applying InputClass "system-keyboard" [ 7.621] (II) LoadModule: "libinput" [ 7.622] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 7.624] (II) Module libinput: vendor="X.Org Foundation" [ 7.624] compiled for 1.21.1.8, module version = 1.4.0 [ 7.624] Module class: X.Org XInput Driver [ 7.624] ABI class: X.Org XInput driver, version 24.4 [ 7.624] (II) Using input driver 'libinput' for 'Video Bus' [ 7.624] (**) Video Bus: always reports core events [ 7.624] (**) Option "Device" "/dev/input/event1" [ 7.628] (II) event1 - Video Bus: is tagged by udev as: Keyboard [ 7.628] (II) event1 - Video Bus: device is a keyboard [ 7.628] (II) event1 - Video Bus: device removed [ 7.645] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:23/LNXVIDEO:00/input/input1/event1" [ 7.645] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6) [ 7.645] (**) Option "xkb_model" "pc105+inet" [ 7.645] (**) Option "xkb_layout" "us" [ 7.645] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 7.656] (II) event1 - Video Bus: is tagged by udev as: Keyboard [ 7.656] (II) event1 - Video Bus: device is a keyboard [ 7.656] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 7.656] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 7.656] (**) Power Button: Applying InputClass "system-keyboard" [ 7.656] (II) Using input driver 'libinput' for 'Power Button' [ 7.656] (**) Power Button: always reports core events [ 7.656] (**) Option "Device" "/dev/input/event0" [ 7.657] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 7.657] (II) event0 - Power Button: device is a keyboard [ 7.657] (II) event0 - Power Button: device removed [ 7.657] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 7.657] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 7.657] (**) Option "xkb_model" "pc105+inet" [ 7.657] (**) Option "xkb_layout" "us" [ 7.657] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 7.657] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 7.657] (II) event0 - Power Button: device is a keyboard [ 7.658] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event3) [ 7.658] (II) No input driver specified, ignoring this device. [ 7.658] (II) This device may have been added with another device file. [ 7.658] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event4) [ 7.658] (II) No input driver specified, ignoring this device. [ 7.658] (II) This device may have been added with another device file. [ 7.658] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event5) [ 7.658] (II) No input driver specified, ignoring this device. [ 7.658] (II) This device may have been added with another device file. [ 7.658] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event6) [ 7.658] (II) No input driver specified, ignoring this device. [ 7.658] (II) This device may have been added with another device file. [ 7.658] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event7) [ 7.658] (II) No input driver specified, ignoring this device. [ 7.658] (II) This device may have been added with another device file. [ 7.659] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event8) [ 7.659] (II) No input driver specified, ignoring this device. [ 7.659] (II) This device may have been added with another device file. [ 7.659] (II) config/udev: Adding input device PC Speaker (/dev/input/event2) [ 7.659] (II) No input driver specified, ignoring this device. [ 7.659] (II) This device may have been added with another device file. [ 131.555] (II) AMDGPU(0): EDID vendor "UTV", prod id 48 [ 131.555] (II) AMDGPU(0): Using EDID range info for horizontal sync [ 131.555] (II) AMDGPU(0): Using EDID range info for vertical refresh [ 131.555] (II) AMDGPU(0): Printing DDC gathered Modelines: [ 131.555] (II) AMDGPU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 131.555] (II) AMDGPU(0): Modeline "1360x768"x0.0 84.75 1360 1432 1568 1776 768 771 776 798 -hsync +vsync (47.7 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "525x480"x0.0 27.00 525 541 603 663 480 489 495 525 -hsync -vsync (40.7 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 131.555] (II) AMDGPU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 131.555] (--) AMDGPU(0): HDMI max TMDS frequency 225000KHz [ 160.382] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse System Control (/dev/input/event12) [ 160.382] (**) MOSART Semi. 2.4G Keyboard Mouse System Control: Applying InputClass "libinput keyboard catchall" [ 160.382] (**) MOSART Semi. 2.4G Keyboard Mouse System Control: Applying InputClass "system-keyboard" [ 160.382] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse System Control' [ 160.382] (**) MOSART Semi. 2.4G Keyboard Mouse System Control: always reports core events [ 160.382] (**) Option "Device" "/dev/input/event12" [ 160.383] (II) event12 - MOSART Semi. 2.4G Keyboard Mouse System Control: is tagged by udev as: Keyboard [ 160.383] (II) event12 - MOSART Semi. 2.4G Keyboard Mouse System Control: device is a keyboard [ 160.383] (II) event12 - MOSART Semi. 2.4G Keyboard Mouse System Control: device removed [ 160.383] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.1/0003:062A:4101.0002/input/input12/event12" [ 160.383] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse System Control" (type: KEYBOARD, id 8) [ 160.383] (**) Option "xkb_model" "pc105+inet" [ 160.383] (**) Option "xkb_layout" "us" [ 160.383] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 160.384] (II) event12 - MOSART Semi. 2.4G Keyboard Mouse System Control: is tagged by udev as: Keyboard [ 160.384] (II) event12 - MOSART Semi. 2.4G Keyboard Mouse System Control: device is a keyboard [ 160.389] (II) config/udev: Adding input device USB usb keyboard Consumer Control (/dev/input/event15) [ 160.389] (**) USB usb keyboard Consumer Control: Applying InputClass "libinput keyboard catchall" [ 160.389] (**) USB usb keyboard Consumer Control: Applying InputClass "system-keyboard" [ 160.389] (II) Using input driver 'libinput' for 'USB usb keyboard Consumer Control' [ 160.389] (**) USB usb keyboard Consumer Control: always reports core events [ 160.389] (**) Option "Device" "/dev/input/event15" [ 160.390] (II) event15 - USB usb keyboard Consumer Control: is tagged by udev as: Keyboard [ 160.390] (II) event15 - USB usb keyboard Consumer Control: device is a keyboard [ 160.390] (II) event15 - USB usb keyboard Consumer Control: device removed [ 160.390] (II) libinput: USB usb keyboard Consumer Control: needs a virtual subdevice [ 160.390] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:C0F4:01E0.0004/input/input15/event15" [ 160.390] (II) XINPUT: Adding extended input device "USB usb keyboard Consumer Control" (type: MOUSE, id 9) [ 160.390] (**) Option "AccelerationScheme" "none" [ 160.390] (**) USB usb keyboard Consumer Control: (accel) selected scheme none/0 [ 160.390] (**) USB usb keyboard Consumer Control: (accel) acceleration factor: 2.000 [ 160.390] (**) USB usb keyboard Consumer Control: (accel) acceleration threshold: 4 [ 160.391] (II) event15 - USB usb keyboard Consumer Control: is tagged by udev as: Keyboard [ 160.391] (II) event15 - USB usb keyboard Consumer Control: device is a keyboard [ 160.391] (**) USB usb keyboard Consumer Control: Applying InputClass "libinput keyboard catchall" [ 160.391] (**) USB usb keyboard Consumer Control: Applying InputClass "system-keyboard" [ 160.391] (II) Using input driver 'libinput' for 'USB usb keyboard Consumer Control' [ 160.391] (**) USB usb keyboard Consumer Control: always reports core events [ 160.391] (**) Option "Device" "/dev/input/event15" [ 160.391] (II) libinput: USB usb keyboard Consumer Control: is a virtual subdevice [ 160.391] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:C0F4:01E0.0004/input/input15/event15" [ 160.391] (II) XINPUT: Adding extended input device "USB usb keyboard Consumer Control" (type: KEYBOARD, id 10) [ 160.391] (**) Option "xkb_model" "pc105+inet" [ 160.391] (**) Option "xkb_layout" "us" [ 160.391] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 160.391] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/event10) [ 160.391] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "libinput pointer catchall" [ 160.391] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse' [ 160.391] (**) MOSART Semi. 2.4G Keyboard Mouse: always reports core events [ 160.391] (**) Option "Device" "/dev/input/event10" [ 160.392] (II) event10 - MOSART Semi. 2.4G Keyboard Mouse: is tagged by udev as: Mouse [ 160.392] (II) event10 - MOSART Semi. 2.4G Keyboard Mouse: device is a pointer [ 160.392] (II) event10 - MOSART Semi. 2.4G Keyboard Mouse: device removed [ 160.410] (II) libinput: MOSART Semi. 2.4G Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 160.410] (II) libinput: MOSART Semi. 2.4G Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 160.410] (II) libinput: MOSART Semi. 2.4G Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 160.410] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.1/0003:062A:4101.0002/input/input10/event10" [ 160.410] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse" (type: MOUSE, id 11) [ 160.410] (**) Option "AccelerationScheme" "none" [ 160.410] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) selected scheme none/0 [ 160.410] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) acceleration factor: 2.000 [ 160.410] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) acceleration threshold: 4 [ 160.411] (II) event10 - MOSART Semi. 2.4G Keyboard Mouse: is tagged by udev as: Mouse [ 160.411] (II) event10 - MOSART Semi. 2.4G Keyboard Mouse: device is a pointer [ 160.411] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/event9) [ 160.411] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "libinput keyboard catchall" [ 160.411] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "system-keyboard" [ 160.411] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse' [ 160.411] (**) MOSART Semi. 2.4G Keyboard Mouse: always reports core events [ 160.411] (**) Option "Device" "/dev/input/event9" [ 160.412] (II) event9 - MOSART Semi. 2.4G Keyboard Mouse: is tagged by udev as: Keyboard [ 160.412] (II) event9 - MOSART Semi. 2.4G Keyboard Mouse: device is a keyboard [ 160.412] (II) event9 - MOSART Semi. 2.4G Keyboard Mouse: device removed [ 160.412] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.0/0003:062A:4101.0001/input/input9/event9" [ 160.412] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse" (type: KEYBOARD, id 12) [ 160.412] (**) Option "xkb_model" "pc105+inet" [ 160.412] (**) Option "xkb_layout" "us" [ 160.412] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 160.413] (II) event9 - MOSART Semi. 2.4G Keyboard Mouse: is tagged by udev as: Keyboard [ 160.413] (II) event9 - MOSART Semi. 2.4G Keyboard Mouse: device is a keyboard [ 160.413] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse Consumer Control (/dev/input/event11) [ 160.413] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "libinput keyboard catchall" [ 160.413] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "system-keyboard" [ 160.413] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse Consumer Control' [ 160.413] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: always reports core events [ 160.413] (**) Option "Device" "/dev/input/event11" [ 160.414] (II) event11 - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: is tagged by udev as: Keyboard [ 160.414] (II) event11 - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: device is a keyboard [ 160.414] (II) event11 - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: device removed [ 160.414] (II) libinput: MOSART Semi. 2.4G Keyboard Mouse Consumer Control: needs a virtual subdevice [ 160.414] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.1/0003:062A:4101.0002/input/input11/event11" [ 160.414] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse Consumer Control" (type: MOUSE, id 13) [ 160.414] (**) Option "AccelerationScheme" "none" [ 160.414] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: (accel) selected scheme none/0 [ 160.414] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: (accel) acceleration factor: 2.000 [ 160.414] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: (accel) acceleration threshold: 4 [ 160.415] (II) event11 - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: is tagged by udev as: Keyboard [ 160.415] (II) event11 - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: device is a keyboard [ 160.415] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "libinput keyboard catchall" [ 160.415] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "system-keyboard" [ 160.415] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse Consumer Control' [ 160.415] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: always reports core events [ 160.415] (**) Option "Device" "/dev/input/event11" [ 160.415] (II) libinput: MOSART Semi. 2.4G Keyboard Mouse Consumer Control: is a virtual subdevice [ 160.415] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.1/0003:062A:4101.0002/input/input11/event11" [ 160.415] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse Consumer Control" (type: KEYBOARD, id 14) [ 160.415] (**) Option "xkb_model" "pc105+inet" [ 160.415] (**) Option "xkb_layout" "us" [ 160.415] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 160.416] (II) config/udev: Adding input device USB usb keyboard System Control (/dev/input/event16) [ 160.416] (**) USB usb keyboard System Control: Applying InputClass "libinput keyboard catchall" [ 160.416] (**) USB usb keyboard System Control: Applying InputClass "system-keyboard" [ 160.416] (II) Using input driver 'libinput' for 'USB usb keyboard System Control' [ 160.416] (**) USB usb keyboard System Control: always reports core events [ 160.416] (**) Option "Device" "/dev/input/event16" [ 160.416] (II) event16 - USB usb keyboard System Control: is tagged by udev as: Keyboard [ 160.416] (II) event16 - USB usb keyboard System Control: device is a keyboard [ 160.416] (II) event16 - USB usb keyboard System Control: device removed [ 160.416] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:C0F4:01E0.0004/input/input16/event16" [ 160.416] (II) XINPUT: Adding extended input device "USB usb keyboard System Control" (type: KEYBOARD, id 15) [ 160.416] (**) Option "xkb_model" "pc105+inet" [ 160.416] (**) Option "xkb_layout" "us" [ 160.416] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 160.417] (II) event16 - USB usb keyboard System Control: is tagged by udev as: Keyboard [ 160.417] (II) event16 - USB usb keyboard System Control: device is a keyboard [ 160.418] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/event13) [ 160.418] (II) No input driver specified, ignoring this device. [ 160.418] (II) This device may have been added with another device file. [ 160.418] (II) config/udev: Adding input device USB usb keyboard (/dev/input/event14) [ 160.418] (**) USB usb keyboard: Applying InputClass "libinput keyboard catchall" [ 160.418] (**) USB usb keyboard: Applying InputClass "system-keyboard" [ 160.418] (II) Using input driver 'libinput' for 'USB usb keyboard' [ 160.418] (**) USB usb keyboard: always reports core events [ 160.418] (**) Option "Device" "/dev/input/event14" [ 160.419] (II) event14 - USB usb keyboard: is tagged by udev as: Keyboard [ 160.419] (II) event14 - USB usb keyboard: device is a keyboard [ 160.419] (II) event14 - USB usb keyboard: device removed [ 160.419] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.0/0003:C0F4:01E0.0003/input/input14/event14" [ 160.419] (II) XINPUT: Adding extended input device "USB usb keyboard" (type: KEYBOARD, id 16) [ 160.419] (**) Option "xkb_model" "pc105+inet" [ 160.419] (**) Option "xkb_layout" "us" [ 160.419] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 160.420] (II) event14 - USB usb keyboard: is tagged by udev as: Keyboard [ 160.420] (II) event14 - USB usb keyboard: device is a keyboard [ 160.420] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/mouse0) [ 160.420] (II) No input driver specified, ignoring this device. [ 160.420] (II) This device may have been added with another device file. [ 166.075] (II) event9 - MOSART Semi. 2.4G Keyboard Mouse: device removed [ 166.076] (II) config/udev: removing device MOSART Semi. 2.4G Keyboard Mouse [ 166.076] (II) UnloadModule: "libinput" [ 166.120] (II) event10 - MOSART Semi. 2.4G Keyboard Mouse: device removed [ 166.121] (II) config/udev: removing device MOSART Semi. 2.4G Keyboard Mouse [ 166.121] (II) UnloadModule: "libinput" [ 166.159] (II) event11 - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: device removed [ 166.160] (II) config/udev: removing device MOSART Semi. 2.4G Keyboard Mouse Consumer Control [ 166.160] (II) UnloadModule: "libinput" [ 166.160] (II) config/udev: removing device MOSART Semi. 2.4G Keyboard Mouse Consumer Control [ 166.160] (II) UnloadModule: "libinput" [ 166.191] (II) event12 - MOSART Semi. 2.4G Keyboard Mouse System Control: device removed [ 166.192] (II) config/udev: removing device MOSART Semi. 2.4G Keyboard Mouse System Control [ 166.192] (II) UnloadModule: "libinput" [ 166.343] (II) event14 - USB usb keyboard: device removed [ 166.344] (II) config/udev: removing device USB usb keyboard [ 166.345] (II) UnloadModule: "libinput" [ 166.398] (II) event15 - USB usb keyboard Consumer Control: device removed [ 166.399] (II) config/udev: removing device USB usb keyboard Consumer Control [ 166.399] (II) UnloadModule: "libinput" [ 166.399] (II) config/udev: removing device USB usb keyboard Consumer Control [ 166.399] (II) UnloadModule: "libinput" [ 166.430] (II) event16 - USB usb keyboard System Control: device removed [ 166.430] (II) config/udev: removing device USB usb keyboard System Control [ 166.431] (II) UnloadModule: "libinput" [ 167.836] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/mouse0) [ 167.836] (II) No input driver specified, ignoring this device. [ 167.836] (II) This device may have been added with another device file. [ 167.855] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/event10) [ 167.855] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "libinput pointer catchall" [ 167.855] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse' [ 167.855] (**) MOSART Semi. 2.4G Keyboard Mouse: always reports core events [ 167.855] (**) Option "Device" "/dev/input/event10" [ 167.856] (II) event10 - MOSART Semi. 2.4G Keyboard Mouse: is tagged by udev as: Mouse [ 167.856] (II) event10 - MOSART Semi. 2.4G Keyboard Mouse: device is a pointer [ 167.856] (II) event10 - MOSART Semi. 2.4G Keyboard Mouse: device removed [ 167.877] (II) libinput: MOSART Semi. 2.4G Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 167.877] (II) libinput: MOSART Semi. 2.4G Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 167.877] (II) libinput: MOSART Semi. 2.4G Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 167.877] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.1/0003:062A:4101.0006/input/input18/event10" [ 167.877] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse" (type: MOUSE, id 8) [ 167.877] (**) Option "AccelerationScheme" "none" [ 167.877] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) selected scheme none/0 [ 167.877] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) acceleration factor: 2.000 [ 167.877] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) acceleration threshold: 4 [ 167.878] (II) event10 - MOSART Semi. 2.4G Keyboard Mouse: is tagged by udev as: Mouse [ 167.878] (II) event10 - MOSART Semi. 2.4G Keyboard Mouse: device is a pointer [ 167.878] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/event9) [ 167.878] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "libinput keyboard catchall" [ 167.878] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "system-keyboard" [ 167.879] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse' [ 167.879] (**) MOSART Semi. 2.4G Keyboard Mouse: always reports core events [ 167.879] (**) Option "Device" "/dev/input/event9" [ 167.879] (II) event9 - MOSART Semi. 2.4G Keyboard Mouse: is tagged by udev as: Keyboard [ 167.879] (II) event9 - MOSART Semi. 2.4G Keyboard Mouse: device is a keyboard [ 167.879] (II) event9 - MOSART Semi. 2.4G Keyboard Mouse: device removed [ 167.879] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.0/0003:062A:4101.0005/input/input17/event9" [ 167.879] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse" (type: KEYBOARD, id 9) [ 167.879] (**) Option "xkb_model" "pc105+inet" [ 167.879] (**) Option "xkb_layout" "us" [ 167.879] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 167.880] (II) event9 - MOSART Semi. 2.4G Keyboard Mouse: is tagged by udev as: Keyboard [ 167.880] (II) event9 - MOSART Semi. 2.4G Keyboard Mouse: device is a keyboard [ 167.881] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/event13) [ 167.881] (II) No input driver specified, ignoring this device. [ 167.881] (II) This device may have been added with another device file. [ 167.881] (II) config/udev: Adding input device USB usb keyboard (/dev/input/event14) [ 167.881] (**) USB usb keyboard: Applying InputClass "libinput keyboard catchall" [ 167.881] (**) USB usb keyboard: Applying InputClass "system-keyboard" [ 167.881] (II) Using input driver 'libinput' for 'USB usb keyboard' [ 167.881] (**) USB usb keyboard: always reports core events [ 167.881] (**) Option "Device" "/dev/input/event14" [ 167.882] (II) event14 - USB usb keyboard: is tagged by udev as: Keyboard [ 167.882] (II) event14 - USB usb keyboard: device is a keyboard [ 167.882] (II) event14 - USB usb keyboard: device removed [ 167.882] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.0/0003:C0F4:01E0.0007/input/input22/event14" [ 167.882] (II) XINPUT: Adding extended input device "USB usb keyboard" (type: KEYBOARD, id 10) [ 167.882] (**) Option "xkb_model" "pc105+inet" [ 167.882] (**) Option "xkb_layout" "us" [ 167.882] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 167.883] (II) event14 - USB usb keyboard: is tagged by udev as: Keyboard [ 167.883] (II) event14 - USB usb keyboard: device is a keyboard [ 167.883] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse Consumer Control (/dev/input/event11) [ 167.883] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "libinput keyboard catchall" [ 167.883] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "system-keyboard" [ 167.883] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse Consumer Control' [ 167.883] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: always reports core events [ 167.883] (**) Option "Device" "/dev/input/event11" [ 167.884] (II) event11 - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: is tagged by udev as: Keyboard [ 167.884] (II) event11 - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: device is a keyboard [ 167.884] (II) event11 - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: device removed [ 167.884] (II) libinput: MOSART Semi. 2.4G Keyboard Mouse Consumer Control: needs a virtual subdevice [ 167.884] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.1/0003:062A:4101.0006/input/input19/event11" [ 167.884] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse Consumer Control" (type: MOUSE, id 11) [ 167.884] (**) Option "AccelerationScheme" "none" [ 167.884] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: (accel) selected scheme none/0 [ 167.884] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: (accel) acceleration factor: 2.000 [ 167.884] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: (accel) acceleration threshold: 4 [ 167.885] (II) event11 - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: is tagged by udev as: Keyboard [ 167.885] (II) event11 - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: device is a keyboard [ 167.885] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "libinput keyboard catchall" [ 167.885] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "system-keyboard" [ 167.885] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse Consumer Control' [ 167.885] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: always reports core events [ 167.885] (**) Option "Device" "/dev/input/event11" [ 167.885] (II) libinput: MOSART Semi. 2.4G Keyboard Mouse Consumer Control: is a virtual subdevice [ 167.885] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.1/0003:062A:4101.0006/input/input19/event11" [ 167.885] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse Consumer Control" (type: KEYBOARD, id 12) [ 167.885] (**) Option "xkb_model" "pc105+inet" [ 167.885] (**) Option "xkb_layout" "us" [ 167.885] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 167.886] (II) config/udev: Adding input device USB usb keyboard Consumer Control (/dev/input/event15) [ 167.886] (**) USB usb keyboard Consumer Control: Applying InputClass "libinput keyboard catchall" [ 167.886] (**) USB usb keyboard Consumer Control: Applying InputClass "system-keyboard" [ 167.886] (II) Using input driver 'libinput' for 'USB usb keyboard Consumer Control' [ 167.886] (**) USB usb keyboard Consumer Control: always reports core events [ 167.886] (**) Option "Device" "/dev/input/event15" [ 167.886] (II) event15 - USB usb keyboard Consumer Control: is tagged by udev as: Keyboard [ 167.886] (II) event15 - USB usb keyboard Consumer Control: device is a keyboard [ 167.887] (II) event15 - USB usb keyboard Consumer Control: device removed [ 167.887] (II) libinput: USB usb keyboard Consumer Control: needs a virtual subdevice [ 167.887] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:C0F4:01E0.0008/input/input23/event15" [ 167.887] (II) XINPUT: Adding extended input device "USB usb keyboard Consumer Control" (type: MOUSE, id 13) [ 167.887] (**) Option "AccelerationScheme" "none" [ 167.887] (**) USB usb keyboard Consumer Control: (accel) selected scheme none/0 [ 167.887] (**) USB usb keyboard Consumer Control: (accel) acceleration factor: 2.000 [ 167.887] (**) USB usb keyboard Consumer Control: (accel) acceleration threshold: 4 [ 167.887] (II) event15 - USB usb keyboard Consumer Control: is tagged by udev as: Keyboard [ 167.887] (II) event15 - USB usb keyboard Consumer Control: device is a keyboard [ 167.887] (**) USB usb keyboard Consumer Control: Applying InputClass "libinput keyboard catchall" [ 167.887] (**) USB usb keyboard Consumer Control: Applying InputClass "system-keyboard" [ 167.887] (II) Using input driver 'libinput' for 'USB usb keyboard Consumer Control' [ 167.887] (**) USB usb keyboard Consumer Control: always reports core events [ 167.887] (**) Option "Device" "/dev/input/event15" [ 167.888] (II) libinput: USB usb keyboard Consumer Control: is a virtual subdevice [ 167.888] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:C0F4:01E0.0008/input/input23/event15" [ 167.888] (II) XINPUT: Adding extended input device "USB usb keyboard Consumer Control" (type: KEYBOARD, id 14) [ 167.888] (**) Option "xkb_model" "pc105+inet" [ 167.888] (**) Option "xkb_layout" "us" [ 167.888] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 167.888] (II) config/udev: Adding input device USB usb keyboard System Control (/dev/input/event16) [ 167.888] (**) USB usb keyboard System Control: Applying InputClass "libinput keyboard catchall" [ 167.888] (**) USB usb keyboard System Control: Applying InputClass "system-keyboard" [ 167.888] (II) Using input driver 'libinput' for 'USB usb keyboard System Control' [ 167.888] (**) USB usb keyboard System Control: always reports core events [ 167.888] (**) Option "Device" "/dev/input/event16" [ 167.889] (II) event16 - USB usb keyboard System Control: is tagged by udev as: Keyboard [ 167.889] (II) event16 - USB usb keyboard System Control: device is a keyboard [ 167.889] (II) event16 - USB usb keyboard System Control: device removed [ 167.889] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:C0F4:01E0.0008/input/input24/event16" [ 167.889] (II) XINPUT: Adding extended input device "USB usb keyboard System Control" (type: KEYBOARD, id 15) [ 167.889] (**) Option "xkb_model" "pc105+inet" [ 167.889] (**) Option "xkb_layout" "us" [ 167.889] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 167.890] (II) event16 - USB usb keyboard System Control: is tagged by udev as: Keyboard [ 167.890] (II) event16 - USB usb keyboard System Control: device is a keyboard [ 167.890] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse System Control (/dev/input/event12) [ 167.890] (**) MOSART Semi. 2.4G Keyboard Mouse System Control: Applying InputClass "libinput keyboard catchall" [ 167.890] (**) MOSART Semi. 2.4G Keyboard Mouse System Control: Applying InputClass "system-keyboard" [ 167.890] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse System Control' [ 167.890] (**) MOSART Semi. 2.4G Keyboard Mouse System Control: always reports core events [ 167.890] (**) Option "Device" "/dev/input/event12" [ 167.891] (II) event12 - MOSART Semi. 2.4G Keyboard Mouse System Control: is tagged by udev as: Keyboard [ 167.891] (II) event12 - MOSART Semi. 2.4G Keyboard Mouse System Control: device is a keyboard [ 167.891] (II) event12 - MOSART Semi. 2.4G Keyboard Mouse System Control: device removed [ 167.891] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:c5:00.3/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.1/0003:062A:4101.0006/input/input20/event12" [ 167.891] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse System Control" (type: KEYBOARD, id 16) [ 167.891] (**) Option "xkb_model" "pc105+inet" [ 167.891] (**) Option "xkb_layout" "us" [ 167.891] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 167.892] (II) event12 - MOSART Semi. 2.4G Keyboard Mouse System Control: is tagged by udev as: Keyboard [ 167.892] (II) event12 - MOSART Semi. 2.4G Keyboard Mouse System Control: device is a keyboard [ 171.781] (II) event1 - Video Bus: device removed [ 171.802] (II) event0 - Power Button: device removed [ 171.802] (II) event10 - MOSART Semi. 2.4G Keyboard Mouse: device removed [ 171.815] (II) event9 - MOSART Semi. 2.4G Keyboard Mouse: device removed [ 171.815] (II) event14 - USB usb keyboard: device removed [ 171.815] (II) event11 - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: device removed [ 171.815] (II) event15 - USB usb keyboard Consumer Control: device removed [ 171.815] (II) event16 - USB usb keyboard System Control: device removed [ 171.815] (II) event12 - MOSART Semi. 2.4G Keyboard Mouse System Control: device removed [ 171.815] (II) AIGLX: Suspending AIGLX clients for VT switch [ 171.957] (II) UnloadModule: "libinput" [ 171.957] (II) UnloadModule: "libinput" [ 171.957] (II) UnloadModule: "libinput" [ 171.957] (II) UnloadModule: "libinput" [ 171.957] (II) UnloadModule: "libinput" [ 171.957] (II) UnloadModule: "libinput" [ 171.957] (II) UnloadModule: "libinput" [ 171.957] (II) UnloadModule: "libinput" [ 171.957] (II) UnloadModule: "libinput" [ 171.957] (II) UnloadModule: "libinput" [ 171.958] (II) UnloadModule: "libinput" [ 171.958] (II) Server terminated successfully (0). Closing log file.