Probe #ba3f755558 of HP Laptop 14-bs0xx

Log: xorg.log.1

[ 16.153] (--) Log file renamed from "/var/log/Xorg.pid-581.log" to "/var/log/Xorg.0.log" [ 16.154] X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 [ 16.154] Current Operating System: Linux XXX 6.8.7-arch1-1 #1 SMP PREEMPT_DYNAMIC Wed, 17 Apr 2024 15:20:28 +0000 x86_64 [ 16.154] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=HASH_653-5946-E32C-6891-578F7B1BE9E7 rw nowatchdog nvme_load=YES loglevel=3 [ 16.154] [ 16.155] Current version of pixman: 0.43.4 [ 16.155] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 16.155] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 16.155] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 20 12:05:50 2024 [ 16.155] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 16.155] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 16.155] (==) No Layout section. Using the first Screen section. [ 16.155] (==) No screen section available. Using defaults. [ 16.155] (**) |-->Screen "Default Screen Section" (0) [ 16.155] (**) | |-->Monitor "<default monitor>" [ 16.156] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 16.156] (**) Allowing byte-swapped clients [ 16.156] (==) Automatically adding devices [ 16.156] (==) Automatically enabling devices [ 16.156] (==) Automatically adding GPU devices [ 16.156] (==) Automatically binding GPU devices [ 16.156] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 16.156] (WW) The directory "/usr/share/fonts/misc" does not exist. [ 16.156] Entry deleted from font path. [ 16.156] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF". [ 16.156] Entry deleted from font path. [ 16.156] (Run 'mkfontdir' on "/usr/share/fonts/TTF"). [ 16.156] (WW) The directory "/usr/share/fonts/OTF" does not exist. [ 16.156] Entry deleted from font path. [ 16.156] (WW) The directory "/usr/share/fonts/Type1" does not exist. [ 16.156] Entry deleted from font path. [ 16.156] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 16.156] Entry deleted from font path. [ 16.156] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 16.156] Entry deleted from font path. [ 16.156] (==) FontPath set to: [ 16.156] (==) ModulePath set to "/usr/lib/xorg/modules" [ 16.156] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 16.156] (II) Module ABI versions: [ 16.157] X.Org ANSI C Emulation: 0.4 [ 16.157] X.Org Video Driver: 25.2 [ 16.157] X.Org XInput driver : 24.4 [ 16.157] X.Org Server Extension : 10.0 [ 16.158] (++) using VT number 2 [ 16.158] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 16.161] (II) xfree86: Adding drm device (/dev/dri/card1) [ 16.161] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1 [ 16.179] (--) PCI:*(0@0:2:0) 8086:22b1:103c:8320 rev 53, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072 [ 16.179] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 16.179] (II) LoadModule: "glx" [ 16.179] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 16.184] (II) Module glx: vendor="X.Org Foundation" [ 16.185] compiled for 1.21.1.13, module version = 1.0.0 [ 16.185] ABI class: X.Org Server Extension, version 10.0 [ 16.185] (==) Matched intel as autoconfigured driver 0 [ 16.185] (==) Matched modesetting as autoconfigured driver 1 [ 16.185] (==) Matched fbdev as autoconfigured driver 2 [ 16.185] (==) Matched vesa as autoconfigured driver 3 [ 16.185] (==) Assigned the driver to the xf86ConfigLayout [ 16.185] (II) LoadModule: "intel" [ 16.185] (WW) Warning, couldn't open module intel [ 16.185] (EE) Failed to load module "intel" (module does not exist, 0) [ 16.185] (II) LoadModule: "modesetting" [ 16.185] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 16.188] (II) Module modesetting: vendor="X.Org Foundation" [ 16.189] compiled for 1.21.1.13, module version = 1.21.1 [ 16.189] Module class: X.Org Video Driver [ 16.189] ABI class: X.Org Video Driver, version 25.2 [ 16.189] (II) LoadModule: "fbdev" [ 16.189] (WW) Warning, couldn't open module fbdev [ 16.189] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 16.189] (II) LoadModule: "vesa" [ 16.189] (WW) Warning, couldn't open module vesa [ 16.189] (EE) Failed to load module "vesa" (module does not exist, 0) [ 16.189] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 16.220] (II) modeset(0): using drv /dev/dri/card1 [ 16.221] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 16.221] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 16.221] (==) modeset(0): RGB weight 888 [ 16.221] (==) modeset(0): Default visual is TrueColor [ 16.221] (II) Loading sub module "glamoregl" [ 16.221] (II) LoadModule: "glamoregl" [ 16.221] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 16.230] (II) Module glamoregl: vendor="X.Org Foundation" [ 16.230] compiled for 1.21.1.13, module version = 1.0.1 [ 16.230] ABI class: X.Org ANSI C Emulation, version 0.4 [ 16.317] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 400 (BSW) [ 16.317] (II) modeset(0): glamor initialized [ 16.317] (==) modeset(0): VariableRefresh: disabled [ 16.317] (==) modeset(0): AsyncFlipSecondaries: disabled [ 16.319] (II) modeset(0): Output eDP-1 has no monitor section [ 16.319] (II) modeset(0): Output DP-1 has no monitor section [ 16.323] (II) modeset(0): Output HDMI-1 has no monitor section [ 16.324] (II) modeset(0): Output DP-2 has no monitor section [ 16.326] (II) modeset(0): Output HDMI-2 has no monitor section [ 16.329] (II) modeset(0): EDID for output eDP-1 [ 16.329] (II) modeset(0): Manufacturer: BOE Model: 696 Serial#: ... [ 16.329] (II) modeset(0): Year: 2015 Week: 1 [ 16.329] (II) modeset(0): EDID Version: 1.4 [ 16.329] (II) modeset(0): Digital Display Input [ 16.329] (II) modeset(0): 6 bits per channel [ 16.329] (II) modeset(0): Digital interface is DisplayPort [ 16.329] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17 [ 16.329] (II) modeset(0): Gamma: 2.20 [ 16.329] (II) modeset(0): No DPMS capabilities specified [ 16.329] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 16.329] (II) modeset(0): First detailed timing is preferred mode [ 16.329] (II) modeset(0): Preferred mode is native pixel format and refresh rate [ 16.329] (II) modeset(0): redX: 0.590 redY: 0.350 greenX: 0.329 greenY: 0.555 [ 16.329] (II) modeset(0): blueX: 0.152 blueY: 0.118 whiteX: 0.312 whiteY: 0.328 [ 16.329] (II) modeset(0): Manufacturer's mask: 0 [ 16.329] (II) modeset(0): Supported detailed timing: [ 16.329] (II) modeset(0): clock: 70.1 MHz Image Size: 309 x 173 mm [ 16.329] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1498 h_border: 0 [ 16.329] (II) modeset(0): v_active: 768 v_sync: 772 v_sync_end 776 v_blanking: 780 v_border: 0 [ 16.329] (II) modeset(0): Supported detailed timing: [ 16.329] (II) modeset(0): clock: 46.7 MHz Image Size: 309 x 173 mm [ 16.329] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1498 h_border: 0 [ 16.329] (II) modeset(0): v_active: 768 v_sync: 772 v_sync_end 776 v_blanking: 780 v_border: 0 [ 16.329] (II) modeset(0): Unknown vendor-specific block 2 [ 16.329] (II) modeset(0): EDID (in hex): [ 16.329] (II) modeset(0): 00ffffffffffff0009e5960600000000 [ 16.329] (II) modeset(0): 01190104951f11780a24109759548e27 [ 16.329] (II) modeset(0): 1e505400000001010101010101010101 [ 16.329] (II) modeset(0): 010101010101641b568450000c303020 [ 16.329] (II) modeset(0): 440035ad1000001a3e12568450000c30 [ 16.329] (II) modeset(0): 3020440035ad1000001a000000000000 [ 16.329] (II) modeset(0): 00000000000000000000000000000002 [ 16.329] (II) modeset(0): 000c46f90b3c6e0b0f19700000000097 [ 16.329] (II) modeset(0): Printing probed modes for output eDP-1 [ 16.330] (II) modeset(0): Modeline "1366x768"x60.0 70.12 1366 1414 1446 1498 768 772 776 780 +hsync -vsync (46.8 kHz eP) [ 16.330] (II) modeset(0): Modeline "1366x768"x40.0 46.70 1366 1414 1446 1498 768 772 776 780 +hsync -vsync (31.2 kHz e) [ 16.330] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d) [ 16.330] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d) [ 16.330] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d) [ 16.330] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d) [ 16.330] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d) [ 16.330] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 16.330] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d) [ 16.330] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d) [ 16.330] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d) [ 16.330] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d) [ 16.330] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d) [ 16.330] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d) [ 16.330] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d) [ 16.330] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d) [ 16.330] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d) [ 16.330] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d) [ 16.330] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d) [ 16.330] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d) [ 16.330] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d) [ 16.330] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) [ 16.330] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 16.330] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 16.330] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d) [ 16.330] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d) [ 16.330] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d) [ 16.330] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d) [ 16.330] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) [ 16.330] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d) [ 16.330] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d) [ 16.330] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) [ 16.330] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d) [ 16.330] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d) [ 16.330] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) [ 16.330] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 16.330] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d) [ 16.330] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d) [ 16.330] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d) [ 16.330] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d) [ 16.330] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d) [ 16.330] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d) [ 16.330] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d) [ 16.330] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d) [ 16.330] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d) [ 16.330] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d) [ 16.330] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 16.330] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d) [ 16.330] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d) [ 16.330] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d) [ 16.330] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d) [ 16.330] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) [ 16.331] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) [ 16.331] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d) [ 16.331] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d) [ 16.331] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) [ 16.331] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d) [ 16.331] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d) [ 16.331] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d) [ 16.331] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d) [ 16.331] (II) modeset(0): EDID for output DP-1 [ 16.332] (II) modeset(0): EDID for output HDMI-1 [ 16.332] (II) modeset(0): EDID for output DP-2 [ 16.333] (II) modeset(0): EDID for output HDMI-2 [ 16.333] (II) modeset(0): Output eDP-1 connected [ 16.333] (II) modeset(0): Output DP-1 disconnected [ 16.333] (II) modeset(0): Output HDMI-1 disconnected [ 16.333] (II) modeset(0): Output DP-2 disconnected [ 16.333] (II) modeset(0): Output HDMI-2 disconnected [ 16.333] (II) modeset(0): Using exact sizes for initial modes [ 16.333] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0 [ 16.333] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 16.333] (==) modeset(0): DPI set to (96, 96) [ 16.333] (II) Loading sub module "fb" [ 16.333] (II) LoadModule: "fb" [ 16.333] (II) Module "fb" already built-in [ 16.419] (==) modeset(0): Backing store enabled [ 16.419] (==) modeset(0): Silken mouse enabled [ 16.505] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 16.505] (==) modeset(0): DPMS enabled [ 16.506] (II) modeset(0): [DRI2] Setup complete [ 16.506] (II) modeset(0): [DRI2] DRI driver: crocus [ 16.506] (II) modeset(0): [DRI2] VDPAU driver: va_gl [ 16.506] (II) Initializing extension Generic Event Extension [ 16.506] (II) Initializing extension SHAPE [ 16.506] (II) Initializing extension MIT-SHM [ 16.507] (II) Initializing extension XInputExtension [ 16.507] (II) Initializing extension XTEST [ 16.507] (II) Initializing extension BIG-REQUESTS [ 16.508] (II) Initializing extension SYNC [ 16.508] (II) Initializing extension XKEYBOARD [ 16.508] (II) Initializing extension XC-MISC [ 16.509] (II) Initializing extension SECURITY [ 16.509] (II) Initializing extension XFIXES [ 16.509] (II) Initializing extension RENDER [ 16.510] (II) Initializing extension RANDR [ 16.510] (II) Initializing extension COMPOSITE [ 16.511] (II) Initializing extension DAMAGE [ 16.511] (II) Initializing extension MIT-SCREEN-SAVER [ 16.511] (II) Initializing extension DOUBLE-BUFFER [ 16.511] (II) Initializing extension RECORD [ 16.512] (II) Initializing extension DPMS [ 16.512] (II) Initializing extension Present [ 16.512] (II) Initializing extension DRI3 [ 16.513] (II) Initializing extension X-Resource [ 16.513] (II) Initializing extension XVideo [ 16.513] (II) Initializing extension XVideo-MotionCompensation [ 16.513] (II) Initializing extension GLX [ 16.527] (II) AIGLX: Loaded and initialized crocus [ 16.527] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 16.527] (II) Initializing extension XFree86-VidModeExtension [ 16.527] (II) Initializing extension XFree86-DGA [ 16.528] (II) Initializing extension XFree86-DRI [ 16.528] (II) Initializing extension DRI2 [ 16.529] (II) modeset(0): Damage tracking initialized [ 16.529] (II) modeset(0): Setting screen physical size to 361 x 203 [ 16.713] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 16.713] (**) Power Button: Applying InputClass "devname" [ 16.713] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 16.713] (**) Power Button: Applying InputClass "system-keyboard" [ 16.713] (II) LoadModule: "libinput" [ 16.713] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 16.718] (II) Module libinput: vendor="X.Org Foundation" [ 16.718] compiled for 1.21.1.8, module version = 1.4.0 [ 16.718] Module class: X.Org XInput Driver [ 16.718] ABI class: X.Org XInput driver, version 24.4 [ 16.718] (II) Using input driver 'libinput' for 'Power Button' [ 16.718] (**) Power Button: always reports core events [ 16.718] (**) Option "Device" "/dev/input/event2" [ 16.725] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 16.726] (II) event2 - Power Button: device is a keyboard [ 16.726] (II) event2 - Power Button: device removed [ 16.743] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 16.743] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 16.743] (**) Option "xkb_layout" "us" [ 16.747] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 16.747] (II) event2 - Power Button: device is a keyboard [ 16.749] (II) config/udev: Adding input device Video Bus (/dev/input/event8) [ 16.749] (**) Video Bus: Applying InputClass "devname" [ 16.749] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 16.749] (**) Video Bus: Applying InputClass "system-keyboard" [ 16.749] (II) Using input driver 'libinput' for 'Video Bus' [ 16.749] (**) Video Bus: always reports core events [ 16.749] (**) Option "Device" "/dev/input/event8" [ 16.752] (II) event8 - Video Bus: is tagged by udev as: Keyboard [ 16.752] (II) event8 - Video Bus: device is a keyboard [ 16.753] (II) event8 - Video Bus: device removed [ 16.783] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event8" [ 16.783] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 16.783] (**) Option "xkb_layout" "us" [ 16.787] (II) event8 - Video Bus: is tagged by udev as: Keyboard [ 16.787] (II) event8 - Video Bus: device is a keyboard [ 16.789] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 16.789] (**) Power Button: Applying InputClass "devname" [ 16.790] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 16.790] (**) Power Button: Applying InputClass "system-keyboard" [ 16.790] (II) Using input driver 'libinput' for 'Power Button' [ 16.790] (**) Power Button: always reports core events [ 16.790] (**) Option "Device" "/dev/input/event1" [ 16.792] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 16.792] (II) event1 - Power Button: device is a keyboard [ 16.793] (II) event1 - Power Button: device removed [ 16.820] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 16.820] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 16.820] (**) Option "xkb_layout" "us" [ 16.824] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 16.824] (II) event1 - Power Button: device is a keyboard [ 16.826] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 16.826] (**) Lid Switch: Applying InputClass "devname" [ 16.826] (II) Using input driver 'libinput' for 'Lid Switch' [ 16.826] (**) Lid Switch: always reports core events [ 16.826] (**) Option "Device" "/dev/input/event0" [ 16.829] (II) event0 - Lid Switch: is tagged by udev as: Switch [ 16.829] (II) event0 - Lid Switch: device is a switch device [ 16.830] (II) event0 - Lid Switch: device removed [ 16.853] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0/event0" [ 16.853] (II) XINPUT: Adding extended input device "Lid Switch" (type: KEYBOARD, id 9) [ 16.857] (II) event0 - Lid Switch: is tagged by udev as: Switch [ 16.857] (II) event0 - Lid Switch: device is a switch device [ 16.860] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9) [ 16.860] (**) HDA Intel PCH Mic: Applying InputClass "devname" [ 16.860] (II) Using input driver 'libinput' for 'HDA Intel PCH Mic' [ 16.860] (**) HDA Intel PCH Mic: always reports core events [ 16.860] (**) Option "Device" "/dev/input/event9" [ 16.863] (II) event9 - HDA Intel PCH Mic: is tagged by udev as: Switch [ 16.897] (II) event9 - not using input device '/dev/input/event9'. [ 16.897] (EE) libinput: HDA Intel PCH Mic: Failed to create a device for /dev/input/event9 [ 16.897] (EE) PreInit returned 2 for "HDA Intel PCH Mic" [ 16.897] (II) UnloadModule: "libinput" [ 16.898] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10) [ 16.899] (**) HDA Intel PCH Headphone: Applying InputClass "devname" [ 16.899] (II) Using input driver 'libinput' for 'HDA Intel PCH Headphone' [ 16.899] (**) HDA Intel PCH Headphone: always reports core events [ 16.899] (**) Option "Device" "/dev/input/event10" [ 16.901] (II) event10 - HDA Intel PCH Headphone: is tagged by udev as: Switch [ 16.933] (II) event10 - not using input device '/dev/input/event10'. [ 16.933] (EE) libinput: HDA Intel PCH Headphone: Failed to create a device for /dev/input/event10 [ 16.933] (EE) PreInit returned 2 for "HDA Intel PCH Headphone" [ 16.933] (II) UnloadModule: "libinput" [ 16.935] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11) [ 16.935] (**) HDA Intel PCH HDMI/DP,pcm=3: Applying InputClass "devname" [ 16.935] (II) Using input driver 'libinput' for 'HDA Intel PCH HDMI/DP,pcm=3' [ 16.935] (**) HDA Intel PCH HDMI/DP,pcm=3: always reports core events [ 16.935] (**) Option "Device" "/dev/input/event11" [ 16.938] (II) event11 - HDA Intel PCH HDMI/DP,pcm=3: is tagged by udev as: Switch [ 16.973] (II) event11 - not using input device '/dev/input/event11'. [ 16.974] (EE) libinput: HDA Intel PCH HDMI/DP,pcm=3: Failed to create a device for /dev/input/event11 [ 16.974] (EE) PreInit returned 2 for "HDA Intel PCH HDMI/DP,pcm=3" [ 16.974] (II) UnloadModule: "libinput" [ 16.976] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 16.976] (**) AT Translated Set 2 keyboard: Applying InputClass "devname" [ 16.976] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 16.976] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 16.976] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 16.976] (**) AT Translated Set 2 keyboard: always reports core events [ 16.976] (**) Option "Device" "/dev/input/event3" [ 16.979] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 16.979] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 16.981] (II) event3 - AT Translated Set 2 keyboard: device removed [ 17.000] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 17.000] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 17.000] (**) Option "xkb_layout" "us" [ 17.004] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 17.004] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 17.008] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6) [ 17.008] (**) ETPS/2 Elantech Touchpad: Applying InputClass "devname" [ 17.008] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall" [ 17.008] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad' [ 17.008] (**) ETPS/2 Elantech Touchpad: always reports core events [ 17.008] (**) Option "Device" "/dev/input/event6" [ 17.011] (II) event6 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad [ 17.015] (II) event6 - ETPS/2 Elantech Touchpad: device is a touchpad [ 17.015] (II) event6 - ETPS/2 Elantech Touchpad: device removed [ 17.054] (**) Option "Tapping" "on" [ 17.054] (II) libinput: ETPS/2 Elantech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 17.054] (II) libinput: ETPS/2 Elantech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 17.054] (II) libinput: ETPS/2 Elantech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 17.055] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event6" [ 17.055] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11) [ 17.058] (**) Option "AccelerationScheme" "none" [ 17.058] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0 [ 17.058] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000 [ 17.058] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4 [ 17.061] (II) event6 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad [ 17.065] (II) event6 - ETPS/2 Elantech Touchpad: device is a touchpad [ 17.067] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0) [ 17.068] (**) ETPS/2 Elantech Touchpad: Applying InputClass "devname" [ 17.068] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad' [ 17.068] (**) ETPS/2 Elantech Touchpad: always reports core events [ 17.068] (**) Option "Device" "/dev/input/mouse0" [ 17.100] (II) mouse0 - not using input device '/dev/input/mouse0'. [ 17.100] (EE) libinput: ETPS/2 Elantech Touchpad: Failed to create a device for /dev/input/mouse0 [ 17.100] (EE) PreInit returned 2 for "ETPS/2 Elantech Touchpad" [ 17.100] (II) UnloadModule: "libinput" [ 17.102] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 17.102] (**) PC Speaker: Applying InputClass "devname" [ 17.102] (II) Using input driver 'libinput' for 'PC Speaker' [ 17.102] (**) PC Speaker: always reports core events [ 17.102] (**) Option "Device" "/dev/input/event5" [ 17.105] (II) event5 - PC Speaker: not tagged as supported input device [ 17.137] (II) event5 - not using input device '/dev/input/event5'. [ 17.137] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event5 [ 17.137] (EE) PreInit returned 2 for "PC Speaker" [ 17.137] (II) UnloadModule: "libinput" [ 17.149] (II) config/udev: Adding input device Wireless hotkeys (/dev/input/event4) [ 17.149] (**) Wireless hotkeys: Applying InputClass "devname" [ 17.149] (**) Wireless hotkeys: Applying InputClass "libinput keyboard catchall" [ 17.149] (**) Wireless hotkeys: Applying InputClass "system-keyboard" [ 17.149] (II) Using input driver 'libinput' for 'Wireless hotkeys' [ 17.149] (**) Wireless hotkeys: always reports core events [ 17.149] (**) Option "Device" "/dev/input/event4" [ 17.151] (II) event4 - Wireless hotkeys: is tagged by udev as: Keyboard [ 17.151] (II) event4 - Wireless hotkeys: device is a keyboard [ 17.151] (II) event4 - Wireless hotkeys: device removed [ 17.183] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event4" [ 17.183] (II) XINPUT: Adding extended input device "Wireless hotkeys" (type: KEYBOARD, id 12) [ 17.183] (**) Option "xkb_layout" "us" [ 17.189] (II) event4 - Wireless hotkeys: is tagged by udev as: Keyboard [ 17.189] (II) event4 - Wireless hotkeys: device is a keyboard [ 17.193] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7) [ 17.193] (**) HP WMI hotkeys: Applying InputClass "devname" [ 17.193] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 17.193] (**) HP WMI hotkeys: Applying InputClass "system-keyboard" [ 17.193] (II) Using input driver 'libinput' for 'HP WMI hotkeys' [ 17.193] (**) HP WMI hotkeys: always reports core events [ 17.193] (**) Option "Device" "/dev/input/event7" [ 17.198] (II) event7 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 17.198] (II) event7 - HP WMI hotkeys: device is a keyboard [ 17.199] (II) event7 - HP WMI hotkeys: device removed [ 17.230] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7" [ 17.230] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13) [ 17.230] (**) Option "xkb_layout" "us" [ 17.236] (II) event7 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 17.236] (II) event7 - HP WMI hotkeys: device is a keyboard [ 43.199] (II) event2 - Power Button: device removed [ 43.210] (II) event8 - Video Bus: device removed [ 43.240] (II) event1 - Power Button: device removed [ 43.257] (II) event0 - Lid Switch: device removed [ 43.274] (II) event3 - AT Translated Set 2 keyboard: device removed [ 43.290] (II) event6 - ETPS/2 Elantech Touchpad: device removed [ 43.324] (II) event4 - Wireless hotkeys: device removed [ 43.357] (II) event7 - HP WMI hotkeys: device removed [ 43.390] (II) AIGLX: Suspending AIGLX clients for VT switch [ 26773.727] (II) config/udev: removing device Power Button [ 26773.790] (II) UnloadModule: "libinput" [ 26773.793] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 26773.793] (**) Power Button: Applying InputClass "devname" [ 26773.793] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 26773.838] (**) Power Button: Applying InputClass "system-keyboard" [ 26773.838] (II) Using input driver 'libinput' for 'Power Button' [ 26773.838] (**) Power Button: always reports core events [ 26773.839] (**) Option "Device" "/dev/input/event2" [ 26773.879] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 26773.883] (II) event2 - Power Button: device is a keyboard [ 26773.885] (II) event2 - Power Button: device removed [ 26773.929] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 26773.930] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 26773.930] (**) Option "xkb_layout" "us" [ 26773.931] (II) config/udev: removing device Video Bus [ 26773.931] (II) UnloadModule: "libinput" [ 26773.940] (II) config/udev: Adding input device Video Bus (/dev/input/event8) [ 26773.940] (**) Video Bus: Applying InputClass "devname" [ 26773.940] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 26773.940] (**) Video Bus: Applying InputClass "system-keyboard" [ 26773.940] (II) Using input driver 'libinput' for 'Video Bus' [ 26773.940] (**) Video Bus: always reports core events [ 26773.940] (**) Option "Device" "/dev/input/event8" [ 26773.947] (II) event8 - Video Bus: is tagged by udev as: Keyboard [ 26773.948] (II) event8 - Video Bus: device is a keyboard [ 26773.951] (II) event8 - Video Bus: device removed [ 26774.050] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event8" [ 26774.050] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 26774.051] (**) Option "xkb_layout" "us" [ 26774.167] (II) config/udev: removing device Power Button [ 26774.168] (II) UnloadModule: "libinput" [ 26774.169] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 26774.169] (**) Power Button: Applying InputClass "devname" [ 26774.169] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 26774.169] (**) Power Button: Applying InputClass "system-keyboard" [ 26774.169] (II) Using input driver 'libinput' for 'Power Button' [ 26774.169] (**) Power Button: always reports core events [ 26774.170] (**) Option "Device" "/dev/input/event1" [ 26774.221] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 26774.222] (II) event1 - Power Button: device is a keyboard [ 26774.222] (II) event1 - Power Button: device removed [ 26774.327] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 26774.327] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 26774.327] (**) Option "xkb_layout" "us" [ 26774.458] (II) config/udev: removing device Lid Switch [ 26774.458] (II) UnloadModule: "libinput" [ 26774.460] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 26774.460] (**) Lid Switch: Applying InputClass "devname" [ 26774.460] (II) Using input driver 'libinput' for 'Lid Switch' [ 26774.460] (**) Lid Switch: always reports core events [ 26774.460] (**) Option "Device" "/dev/input/event0" [ 26774.527] (II) event0 - Lid Switch: is tagged by udev as: Switch [ 26774.588] (II) event0 - Lid Switch: device is a switch device [ 26774.589] (II) event0 - Lid Switch: device removed [ 26774.635] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0/event0" [ 26774.635] (II) XINPUT: Adding extended input device "Lid Switch" (type: KEYBOARD, id 9) [ 26774.845] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10) [ 26774.845] (**) HDA Intel PCH Headphone: Applying InputClass "devname" [ 26774.845] (II) Using input driver 'libinput' for 'HDA Intel PCH Headphone' [ 26774.845] (**) HDA Intel PCH Headphone: always reports core events [ 26774.845] (**) Option "Device" "/dev/input/event10" [ 26774.890] (II) event10 - HDA Intel PCH Headphone: is tagged by udev as: Switch [ 26775.047] (II) event10 - not using input device '/dev/input/event10'. [ 26775.048] (EE) libinput: HDA Intel PCH Headphone: Failed to create a device for /dev/input/event10 [ 26775.048] (EE) PreInit returned 2 for "HDA Intel PCH Headphone" [ 26775.048] (II) UnloadModule: "libinput" [ 26775.061] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9) [ 26775.061] (**) HDA Intel PCH Mic: Applying InputClass "devname" [ 26775.061] (II) Using input driver 'libinput' for 'HDA Intel PCH Mic' [ 26775.061] (**) HDA Intel PCH Mic: always reports core events [ 26775.061] (**) Option "Device" "/dev/input/event9" [ 26775.172] (II) event9 - HDA Intel PCH Mic: is tagged by udev as: Switch [ 26775.544] (II) event9 - not using input device '/dev/input/event9'. [ 26775.544] (EE) libinput: HDA Intel PCH Mic: Failed to create a device for /dev/input/event9 [ 26775.545] (EE) PreInit returned 2 for "HDA Intel PCH Mic" [ 26775.545] (II) UnloadModule: "libinput" [ 26775.546] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11) [ 26775.546] (**) HDA Intel PCH HDMI/DP,pcm=3: Applying InputClass "devname" [ 26775.546] (II) Using input driver 'libinput' for 'HDA Intel PCH HDMI/DP,pcm=3' [ 26775.546] (**) HDA Intel PCH HDMI/DP,pcm=3: always reports core events [ 26775.546] (**) Option "Device" "/dev/input/event11" [ 26775.618] (II) event11 - HDA Intel PCH HDMI/DP,pcm=3: is tagged by udev as: Switch [ 26775.830] (II) event11 - not using input device '/dev/input/event11'. [ 26775.830] (EE) libinput: HDA Intel PCH HDMI/DP,pcm=3: Failed to create a device for /dev/input/event11 [ 26775.830] (EE) PreInit returned 2 for "HDA Intel PCH HDMI/DP,pcm=3" [ 26775.830] (II) UnloadModule: "libinput" [ 26775.832] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0) [ 26775.832] (**) ETPS/2 Elantech Touchpad: Applying InputClass "devname" [ 26775.832] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad' [ 26775.832] (**) ETPS/2 Elantech Touchpad: always reports core events [ 26775.832] (**) Option "Device" "/dev/input/mouse0" [ 26776.034] (II) mouse0 - not using input device '/dev/input/mouse0'. [ 26776.034] (EE) libinput: ETPS/2 Elantech Touchpad: Failed to create a device for /dev/input/mouse0 [ 26776.034] (EE) PreInit returned 2 for "ETPS/2 Elantech Touchpad" [ 26776.034] (II) UnloadModule: "libinput" [ 26776.035] (II) config/udev: removing device AT Translated Set 2 keyboard [ 26776.036] (II) UnloadModule: "libinput" [ 26776.050] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 26776.050] (**) AT Translated Set 2 keyboard: Applying InputClass "devname" [ 26776.050] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 26776.050] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 26776.050] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 26776.050] (**) AT Translated Set 2 keyboard: always reports core events [ 26776.050] (**) Option "Device" "/dev/input/event3" [ 26776.053] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 26776.084] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 26776.085] (II) event3 - AT Translated Set 2 keyboard: device removed [ 26776.131] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 26776.131] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 26776.131] (**) Option "xkb_layout" "us" [ 26776.133] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 26776.133] (**) PC Speaker: Applying InputClass "devname" [ 26776.133] (II) Using input driver 'libinput' for 'PC Speaker' [ 26776.133] (**) PC Speaker: always reports core events [ 26776.133] (**) Option "Device" "/dev/input/event5" [ 26776.141] (II) event5 - PC Speaker: not tagged as supported input device [ 26776.235] (II) event5 - not using input device '/dev/input/event5'. [ 26776.236] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event5 [ 26776.236] (EE) PreInit returned 2 for "PC Speaker" [ 26776.236] (II) UnloadModule: "libinput" [ 26776.250] (II) config/udev: removing device ETPS/2 Elantech Touchpad [ 26776.250] (II) UnloadModule: "libinput" [ 26776.252] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6) [ 26776.252] (**) ETPS/2 Elantech Touchpad: Applying InputClass "devname" [ 26776.252] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall" [ 26776.252] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad' [ 26776.252] (**) ETPS/2 Elantech Touchpad: always reports core events [ 26776.252] (**) Option "Device" "/dev/input/event6" [ 26776.272] (II) event6 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad [ 26776.288] (II) event6 - ETPS/2 Elantech Touchpad: device is a touchpad [ 26776.288] (II) event6 - ETPS/2 Elantech Touchpad: device removed [ 26776.334] (**) Option "Tapping" "on" [ 26776.334] (II) libinput: ETPS/2 Elantech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 26776.334] (II) libinput: ETPS/2 Elantech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 26776.334] (II) libinput: ETPS/2 Elantech Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 26776.338] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event6" [ 26776.338] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11) [ 26776.342] (**) Option "AccelerationScheme" "none" [ 26776.343] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0 [ 26776.343] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000 [ 26776.343] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4 [ 26776.349] (II) config/udev: removing device Wireless hotkeys [ 26776.350] (II) UnloadModule: "libinput" [ 26776.355] (II) config/udev: Adding input device Wireless hotkeys (/dev/input/event4) [ 26776.355] (**) Wireless hotkeys: Applying InputClass "devname" [ 26776.355] (**) Wireless hotkeys: Applying InputClass "libinput keyboard catchall" [ 26776.355] (**) Wireless hotkeys: Applying InputClass "system-keyboard" [ 26776.355] (II) Using input driver 'libinput' for 'Wireless hotkeys' [ 26776.355] (**) Wireless hotkeys: always reports core events [ 26776.355] (**) Option "Device" "/dev/input/event4" [ 26776.360] (II) event4 - Wireless hotkeys: is tagged by udev as: Keyboard [ 26776.361] (II) event4 - Wireless hotkeys: device is a keyboard [ 26776.361] (II) event4 - Wireless hotkeys: device removed [ 26776.417] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event4" [ 26776.417] (II) XINPUT: Adding extended input device "Wireless hotkeys" (type: KEYBOARD, id 12) [ 26776.417] (**) Option "xkb_layout" "us" [ 26776.418] (II) config/udev: removing device HP WMI hotkeys [ 26776.419] (II) UnloadModule: "libinput" [ 26776.419] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7) [ 26776.420] (**) HP WMI hotkeys: Applying InputClass "devname" [ 26776.420] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 26776.420] (**) HP WMI hotkeys: Applying InputClass "system-keyboard" [ 26776.420] (II) Using input driver 'libinput' for 'HP WMI hotkeys' [ 26776.420] (**) HP WMI hotkeys: always reports core events [ 26776.420] (**) Option "Device" "/dev/input/event7" [ 26776.425] (II) event7 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 26776.426] (II) event7 - HP WMI hotkeys: device is a keyboard [ 26776.426] (II) event7 - HP WMI hotkeys: device removed [ 26776.444] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7" [ 26776.448] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13) [ 26776.448] (**) Option "xkb_layout" "us" [ 30834.547] (II) UnloadModule: "libinput" [ 30834.554] (II) UnloadModule: "libinput" [ 30834.554] (II) UnloadModule: "libinput" [ 30834.554] (II) UnloadModule: "libinput" [ 30834.554] (II) UnloadModule: "libinput" [ 30834.554] (II) UnloadModule: "libinput" [ 30834.554] (II) UnloadModule: "libinput" [ 30834.559] (II) UnloadModule: "libinput" [ 30834.663] (II) Server terminated successfully (0). Closing log file.


Hardware for Linux and BSD

GitHub