[ 7.624] (--) Log file renamed from "/var/log/Xorg.pid-439.log" to "/var/log/Xorg.0.log" [ 7.625] X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 [ 7.625] Current Operating System: Linux XXX 6.7.4-arch1-1 #1 SMP PREEMPT_DYNAMIC Mon, 05 Feb 2024 22:07:49 +0000 x86_64 [ 7.625] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=HASH_B84-7735-5A33-EA0D-4B7AFED746B6 zswap.enabled=0 rootflags=subvol=@ rw rootfstype=btrfs [ 7.625] [ 7.625] Current version of pixman: 0.43.2 [ 7.625] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 7.625] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 7.625] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 12 03:25:41 2024 [ 7.626] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 7.626] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 7.626] (==) No Layout section. Using the first Screen section. [ 7.626] (==) No screen section available. Using defaults. [ 7.626] (**) |-->Screen "Default Screen Section" (0) [ 7.626] (**) | |-->Monitor "<default monitor>" [ 7.627] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 7.627] (==) Automatically adding devices [ 7.627] (==) Automatically enabling devices [ 7.627] (==) Automatically adding GPU devices [ 7.627] (==) Automatically binding GPU devices [ 7.627] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 7.627] (WW) The directory "/usr/share/fonts/misc" does not exist. [ 7.627] Entry deleted from font path. [ 7.627] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF". [ 7.627] Entry deleted from font path. [ 7.627] (Run 'mkfontdir' on "/usr/share/fonts/TTF"). [ 7.627] (WW) The directory "/usr/share/fonts/OTF" does not exist. [ 7.627] Entry deleted from font path. [ 7.627] (WW) The directory "/usr/share/fonts/Type1" does not exist. [ 7.627] Entry deleted from font path. [ 7.627] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 7.627] Entry deleted from font path. [ 7.627] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 7.627] Entry deleted from font path. [ 7.627] (==) FontPath set to: [ 7.627] (==) ModulePath set to "/usr/lib/xorg/modules" [ 7.627] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 7.627] (II) Module ABI versions: [ 7.627] X.Org ANSI C Emulation: 0.4 [ 7.627] X.Org Video Driver: 25.2 [ 7.627] X.Org XInput driver : 24.4 [ 7.627] X.Org Server Extension : 10.0 [ 7.628] (++) using VT number 2 [ 7.628] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 7.628] (II) xfree86: Adding drm device (/dev/dri/card1) [ 7.628] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1 [ 7.709] (--) PCI:*(0@0:2:0) 8086:3ea0:103c:8538 rev 2, Mem @ 0xf0000000/16777216, 0xe0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072 [ 7.710] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 7.710] (II) LoadModule: "glx" [ 7.710] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 7.724] (II) Module glx: vendor="X.Org Foundation" [ 7.725] compiled for 1.21.1.11, module version = 1.0.0 [ 7.725] ABI class: X.Org Server Extension, version 10.0 [ 7.725] (==) Matched intel as autoconfigured driver 0 [ 7.725] (==) Matched modesetting as autoconfigured driver 1 [ 7.725] (==) Matched fbdev as autoconfigured driver 2 [ 7.725] (==) Matched vesa as autoconfigured driver 3 [ 7.725] (==) Assigned the driver to the xf86ConfigLayout [ 7.725] (II) LoadModule: "intel" [ 7.725] (WW) Warning, couldn't open module intel [ 7.725] (EE) Failed to load module "intel" (module does not exist, 0) [ 7.725] (II) LoadModule: "modesetting" [ 7.725] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 7.730] (II) Module modesetting: vendor="X.Org Foundation" [ 7.731] compiled for 1.21.1.11, module version = 1.21.1 [ 7.731] Module class: X.Org Video Driver [ 7.731] ABI class: X.Org Video Driver, version 25.2 [ 7.731] (II) LoadModule: "fbdev" [ 7.731] (WW) Warning, couldn't open module fbdev [ 7.731] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 7.731] (II) LoadModule: "vesa" [ 7.731] (WW) Warning, couldn't open module vesa [ 7.731] (EE) Failed to load module "vesa" (module does not exist, 0) [ 7.731] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 7.753] (II) modeset(0): using drv /dev/dri/card1 [ 7.753] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 7.753] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 7.753] (==) modeset(0): RGB weight 888 [ 7.753] (==) modeset(0): Default visual is TrueColor [ 7.754] (II) Loading sub module "glamoregl" [ 7.754] (II) LoadModule: "glamoregl" [ 7.754] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 7.769] (II) Module glamoregl: vendor="X.Org Foundation" [ 7.769] compiled for 1.21.1.11, module version = 1.0.1 [ 7.769] ABI class: X.Org ANSI C Emulation, version 0.4 [ 7.982] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics 620 (WHL GT2) [ 7.982] (II) modeset(0): glamor initialized [ 7.982] (==) modeset(0): VariableRefresh: disabled [ 7.982] (==) modeset(0): AsyncFlipSecondaries: disabled [ 7.984] (II) modeset(0): Output eDP-1 has no monitor section [ 7.993] (II) modeset(0): Output HDMI-1 has no monitor section [ 7.993] (II) modeset(0): Output DP-1 has no monitor section [ 8.061] (II) modeset(0): Output HDMI-2 has no monitor section [ 8.064] (II) modeset(0): EDID for output eDP-1 [ 8.064] (II) modeset(0): Manufacturer: BOE Model: 76e Serial#: ... [ 8.064] (II) modeset(0): Year: 2017 Week: 1 [ 8.064] (II) modeset(0): EDID Version: 1.4 [ 8.064] (II) modeset(0): Digital Display Input [ 8.064] (II) modeset(0): 6 bits per channel [ 8.064] (II) modeset(0): Digital interface is DisplayPort [ 8.064] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 8.064] (II) modeset(0): Gamma: 2.20 [ 8.064] (II) modeset(0): No DPMS capabilities specified [ 8.064] (II) modeset(0): Supported color encodings: RGB 4:4:4 [ 8.064] (II) modeset(0): First detailed timing is preferred mode [ 8.064] (II) modeset(0): Preferred mode is native pixel format and refresh rate [ 8.064] (II) modeset(0): redX: 0.574 redY: 0.342 greenX: 0.345 greenY: 0.574 [ 8.064] (II) modeset(0): blueX: 0.160 blueY: 0.132 whiteX: 0.312 whiteY: 0.328 [ 8.064] (II) modeset(0): Manufacturer's mask: 0 [ 8.064] (II) modeset(0): Supported detailed timing: [ 8.064] (II) modeset(0): clock: 76.3 MHz Image Size: 344 x 194 mm [ 8.064] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1592 h_border: 0 [ 8.064] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 798 v_border: 0 [ 8.064] (II) modeset(0): Supported detailed timing: [ 8.064] (II) modeset(0): clock: 76.3 MHz Image Size: 344 x 194 mm [ 8.064] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 2303 h_border: 0 [ 8.064] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 828 v_border: 0 [ 8.064] (II) modeset(0): Unknown vendor-specific block 2 [ 8.064] (II) modeset(0): EDID (in hex): [ 8.064] (II) modeset(0): 00ffffffffffff0009e56e0700000000 [ 8.064] (II) modeset(0): 011b0104952213780224309357589329 [ 8.064] (II) modeset(0): 21505400000001010101010101010101 [ 8.065] (II) modeset(0): 010101010101ce1d56e250001e303020 [ 8.065] (II) modeset(0): 360058c21000001ace1d56a953003c30 [ 8.065] (II) modeset(0): 3020360058c21000001a000000000000 [ 8.065] (II) modeset(0): 00000000000000000000000000000002 [ 8.065] (II) modeset(0): 00113fea0b3c6e0d0e196e0000000086 [ 8.065] (II) modeset(0): Printing probed modes for output eDP-1 [ 8.065] (II) modeset(0): Modeline "1366x768"x60.1 76.30 1366 1414 1446 1592 768 771 777 798 +hsync -vsync (47.9 kHz eP) [ 8.065] (II) modeset(0): Modeline "1366x768"x40.0 76.30 1366 1414 1446 2303 768 771 777 828 +hsync -vsync (33.1 kHz e) [ 8.065] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d) [ 8.065] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d) [ 8.065] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d) [ 8.065] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d) [ 8.065] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d) [ 8.065] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 8.065] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d) [ 8.065] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d) [ 8.065] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d) [ 8.065] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d) [ 8.065] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d) [ 8.065] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d) [ 8.065] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d) [ 8.065] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d) [ 8.065] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d) [ 8.065] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d) [ 8.065] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d) [ 8.065] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d) [ 8.065] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d) [ 8.066] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) [ 8.066] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 8.066] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 8.066] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d) [ 8.066] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d) [ 8.066] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d) [ 8.066] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d) [ 8.066] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) [ 8.066] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d) [ 8.066] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d) [ 8.066] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) [ 8.066] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d) [ 8.066] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d) [ 8.066] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) [ 8.066] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 8.066] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d) [ 8.066] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d) [ 8.066] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d) [ 8.066] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d) [ 8.066] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d) [ 8.066] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d) [ 8.066] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d) [ 8.066] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d) [ 8.066] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d) [ 8.066] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d) [ 8.066] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 8.066] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d) [ 8.066] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d) [ 8.066] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d) [ 8.066] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d) [ 8.066] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) [ 8.066] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) [ 8.066] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d) [ 8.066] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d) [ 8.066] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) [ 8.066] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d) [ 8.066] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d) [ 8.066] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d) [ 8.066] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d) [ 8.075] (II) modeset(0): EDID for output HDMI-1 [ 8.075] (II) modeset(0): EDID for output DP-1 [ 8.142] (II) modeset(0): EDID for output HDMI-2 [ 8.142] (II) modeset(0): Output eDP-1 connected [ 8.142] (II) modeset(0): Output HDMI-1 disconnected [ 8.142] (II) modeset(0): Output DP-1 disconnected [ 8.142] (II) modeset(0): Output HDMI-2 disconnected [ 8.142] (II) modeset(0): Using exact sizes for initial modes [ 8.142] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0 [ 8.142] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 8.142] (==) modeset(0): DPI set to (96, 96) [ 8.142] (II) Loading sub module "fb" [ 8.142] (II) LoadModule: "fb" [ 8.142] (II) Module "fb" already built-in [ 8.214] (==) modeset(0): Backing store enabled [ 8.214] (==) modeset(0): Silken mouse enabled [ 8.287] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 8.287] (==) modeset(0): DPMS enabled [ 8.287] (II) modeset(0): [DRI2] Setup complete [ 8.287] (II) modeset(0): [DRI2] DRI driver: iris [ 8.287] (II) modeset(0): [DRI2] VDPAU driver: va_gl [ 8.287] (II) Initializing extension Generic Event Extension [ 8.287] (II) Initializing extension SHAPE [ 8.288] (II) Initializing extension MIT-SHM [ 8.288] (II) Initializing extension XInputExtension [ 8.288] (II) Initializing extension XTEST [ 8.288] (II) Initializing extension BIG-REQUESTS [ 8.289] (II) Initializing extension SYNC [ 8.289] (II) Initializing extension XKEYBOARD [ 8.289] (II) Initializing extension XC-MISC [ 8.289] (II) Initializing extension SECURITY [ 8.290] (II) Initializing extension XFIXES [ 8.290] (II) Initializing extension RENDER [ 8.290] (II) Initializing extension RANDR [ 8.291] (II) Initializing extension COMPOSITE [ 8.291] (II) Initializing extension DAMAGE [ 8.291] (II) Initializing extension MIT-SCREEN-SAVER [ 8.292] (II) Initializing extension DOUBLE-BUFFER [ 8.292] (II) Initializing extension RECORD [ 8.292] (II) Initializing extension DPMS [ 8.292] (II) Initializing extension Present [ 8.293] (II) Initializing extension DRI3 [ 8.293] (II) Initializing extension X-Resource [ 8.293] (II) Initializing extension XVideo [ 8.293] (II) Initializing extension XVideo-MotionCompensation [ 8.293] (II) Initializing extension GLX [ 8.312] (II) AIGLX: Loaded and initialized iris [ 8.312] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 8.312] (II) Initializing extension XFree86-VidModeExtension [ 8.313] (II) Initializing extension XFree86-DGA [ 8.313] (II) Initializing extension XFree86-DRI [ 8.313] (II) Initializing extension DRI2 [ 8.314] (II) modeset(0): Damage tracking initialized [ 8.314] (II) modeset(0): Setting screen physical size to 361 x 203 [ 8.398] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 8.398] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 8.398] (**) Power Button: Applying InputClass "system-keyboard" [ 8.398] (II) LoadModule: "libinput" [ 8.398] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 8.402] (II) Module libinput: vendor="X.Org Foundation" [ 8.403] compiled for 1.21.1.8, module version = 1.4.0 [ 8.403] Module class: X.Org XInput Driver [ 8.403] ABI class: X.Org XInput driver, version 24.4 [ 8.403] (II) Using input driver 'libinput' for 'Power Button' [ 8.403] (**) Power Button: always reports core events [ 8.403] (**) Option "Device" "/dev/input/event2" [ 8.407] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 8.407] (II) event2 - Power Button: device is a keyboard [ 8.408] (II) event2 - Power Button: device removed [ 8.433] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 8.433] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 8.433] (**) Option "xkb_model" "pc105+inet" [ 8.433] (**) Option "xkb_layout" "us" [ 8.433] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.486] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 8.486] (II) event2 - Power Button: device is a keyboard [ 8.487] (II) config/udev: Adding input device Video Bus (/dev/input/event11) [ 8.487] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 8.487] (**) Video Bus: Applying InputClass "system-keyboard" [ 8.487] (II) Using input driver 'libinput' for 'Video Bus' [ 8.487] (**) Video Bus: always reports core events [ 8.487] (**) Option "Device" "/dev/input/event11" [ 8.488] (II) event11 - Video Bus: is tagged by udev as: Keyboard [ 8.488] (II) event11 - Video Bus: device is a keyboard [ 8.488] (II) event11 - Video Bus: device removed [ 8.543] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input22/event11" [ 8.543] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 8.543] (**) Option "xkb_model" "pc105+inet" [ 8.543] (**) Option "xkb_layout" "us" [ 8.543] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.546] (II) event11 - Video Bus: is tagged by udev as: Keyboard [ 8.546] (II) event11 - Video Bus: device is a keyboard [ 8.547] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 8.548] (II) No input driver specified, ignoring this device. [ 8.548] (II) This device may have been added with another device file. [ 8.549] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 8.549] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 8.549] (**) Sleep Button: Applying InputClass "system-keyboard" [ 8.549] (II) Using input driver 'libinput' for 'Sleep Button' [ 8.549] (**) Sleep Button: always reports core events [ 8.549] (**) Option "Device" "/dev/input/event0" [ 8.551] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 8.551] (II) event0 - Sleep Button: device is a keyboard [ 8.551] (II) event0 - Sleep Button: device removed [ 8.567] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 8.567] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 8.567] (**) Option "xkb_model" "pc105+inet" [ 8.567] (**) Option "xkb_layout" "us" [ 8.567] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.569] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 8.570] (II) event0 - Sleep Button: device is a keyboard [ 8.573] (II) config/udev: Adding input device SYNA3081:00 06CB:826F Mouse (/dev/input/event7) [ 8.573] (**) SYNA3081:00 06CB:826F Mouse: Applying InputClass "libinput pointer catchall" [ 8.573] (II) Using input driver 'libinput' for 'SYNA3081:00 06CB:826F Mouse' [ 8.573] (**) SYNA3081:00 06CB:826F Mouse: always reports core events [ 8.573] (**) Option "Device" "/dev/input/event7" [ 8.576] (II) event7 - SYNA3081:00 06CB:826F Mouse: is tagged by udev as: Mouse Pointingstick [ 8.577] (II) event7 - SYNA3081:00 06CB:826F Mouse: device is a pointer [ 8.578] (II) event7 - SYNA3081:00 06CB:826F Mouse: device removed [ 8.617] (II) libinput: SYNA3081:00 06CB:826F Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.617] (II) libinput: SYNA3081:00 06CB:826F Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.617] (II) libinput: SYNA3081:00 06CB:826F Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.617] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA3081:00/0018:06CB:826F.0001/input/input18/event7" [ 8.617] (II) XINPUT: Adding extended input device "SYNA3081:00 06CB:826F Mouse" (type: MOUSE, id 9) [ 8.617] (**) Option "AccelerationScheme" "none" [ 8.617] (**) SYNA3081:00 06CB:826F Mouse: (accel) selected scheme none/0 [ 8.617] (**) SYNA3081:00 06CB:826F Mouse: (accel) acceleration factor: 2.000 [ 8.617] (**) SYNA3081:00 06CB:826F Mouse: (accel) acceleration threshold: 4 [ 8.621] (II) event7 - SYNA3081:00 06CB:826F Mouse: is tagged by udev as: Mouse Pointingstick [ 8.622] (II) event7 - SYNA3081:00 06CB:826F Mouse: device is a pointer [ 8.624] (II) config/udev: Adding input device SYNA3081:00 06CB:826F Mouse (/dev/input/mouse0) [ 8.624] (II) No input driver specified, ignoring this device. [ 8.624] (II) This device may have been added with another device file. [ 8.626] (II) config/udev: Adding input device SYNA3081:00 06CB:826F Touchpad (/dev/input/event8) [ 8.626] (**) SYNA3081:00 06CB:826F Touchpad: Applying InputClass "libinput touchpad catchall" [ 8.626] (II) Using input driver 'libinput' for 'SYNA3081:00 06CB:826F Touchpad' [ 8.626] (**) SYNA3081:00 06CB:826F Touchpad: always reports core events [ 8.626] (**) Option "Device" "/dev/input/event8" [ 8.629] (II) event8 - SYNA3081:00 06CB:826F Touchpad: is tagged by udev as: Touchpad [ 8.635] (II) event8 - SYNA3081:00 06CB:826F Touchpad: device is a touchpad [ 8.635] (II) event8 - SYNA3081:00 06CB:826F Touchpad: device removed [ 8.680] (II) libinput: SYNA3081:00 06CB:826F Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.680] (II) libinput: SYNA3081:00 06CB:826F Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.680] (II) libinput: SYNA3081:00 06CB:826F Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.681] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA3081:00/0018:06CB:826F.0001/input/input19/event8" [ 8.681] (II) XINPUT: Adding extended input device "SYNA3081:00 06CB:826F Touchpad" (type: TOUCHPAD, id 10) [ 8.686] (**) Option "AccelerationScheme" "none" [ 8.686] (**) SYNA3081:00 06CB:826F Touchpad: (accel) selected scheme none/0 [ 8.686] (**) SYNA3081:00 06CB:826F Touchpad: (accel) acceleration factor: 2.000 [ 8.686] (**) SYNA3081:00 06CB:826F Touchpad: (accel) acceleration threshold: 4 [ 8.689] (II) event8 - SYNA3081:00 06CB:826F Touchpad: is tagged by udev as: Touchpad [ 8.695] (II) event8 - SYNA3081:00 06CB:826F Touchpad: device is a touchpad [ 8.698] (II) config/udev: Adding input device SYNA3081:00 06CB:826F Touchpad (/dev/input/mouse1) [ 8.698] (II) No input driver specified, ignoring this device. [ 8.698] (II) This device may have been added with another device file. [ 8.699] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 8.699] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 8.699] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 8.699] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 8.699] (**) AT Translated Set 2 keyboard: always reports core events [ 8.699] (**) Option "Device" "/dev/input/event3" [ 8.702] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 8.702] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 8.704] (II) event3 - AT Translated Set 2 keyboard: device removed [ 8.730] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 8.730] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11) [ 8.730] (**) Option "xkb_model" "pc105+inet" [ 8.730] (**) Option "xkb_layout" "us" [ 8.730] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.733] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 8.733] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 8.737] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10) [ 8.737] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall" [ 8.737] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad' [ 8.737] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 8.737] (**) Option "Device" "/dev/input/event10" [ 8.739] (II) event10 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 8.741] (II) event10 - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm [ 8.745] (II) event10 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 8.746] (II) event10 - SynPS/2 Synaptics TouchPad: device removed [ 8.783] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.783] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.783] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8.784] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input12/event10" [ 8.785] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12) [ 8.789] (**) Option "AccelerationScheme" "none" [ 8.789] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0 [ 8.789] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 8.789] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 8.791] (II) event10 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 8.793] (II) event10 - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm [ 8.797] (II) event10 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 8.799] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2) [ 8.799] (II) No input driver specified, ignoring this device. [ 8.799] (II) This device may have been added with another device file. [ 8.801] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event6) [ 8.801] (II) No input driver specified, ignoring this device. [ 8.801] (II) This device may have been added with another device file. [ 8.802] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0) [ 8.802] (II) No input driver specified, ignoring this device. [ 8.802] (II) This device may have been added with another device file. [ 8.803] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 8.803] (II) No input driver specified, ignoring this device. [ 8.803] (II) This device may have been added with another device file. [ 8.809] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9) [ 8.809] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 8.809] (**) HP WMI hotkeys: Applying InputClass "system-keyboard" [ 8.809] (II) Using input driver 'libinput' for 'HP WMI hotkeys' [ 8.809] (**) HP WMI hotkeys: always reports core events [ 8.809] (**) Option "Device" "/dev/input/event9" [ 8.811] (II) event9 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 8.811] (II) event9 - HP WMI hotkeys: device is a keyboard [ 8.811] (II) event9 - HP WMI hotkeys: device removed [ 8.837] (**) Option "config_info" "udev:/sys/devices/virtual/input/input17/event9" [ 8.837] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13) [ 8.837] (**) Option "xkb_model" "pc105+inet" [ 8.837] (**) Option "xkb_layout" "us" [ 8.837] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.839] (II) event9 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 8.839] (II) event9 - HP WMI hotkeys: device is a keyboard [ 8.840] (II) config/udev: Adding input device Wireless hotkeys (/dev/input/event4) [ 8.841] (**) Wireless hotkeys: Applying InputClass "libinput keyboard catchall" [ 8.841] (**) Wireless hotkeys: Applying InputClass "system-keyboard" [ 8.841] (II) Using input driver 'libinput' for 'Wireless hotkeys' [ 8.841] (**) Wireless hotkeys: always reports core events [ 8.841] (**) Option "Device" "/dev/input/event4" [ 8.842] (II) event4 - Wireless hotkeys: is tagged by udev as: Keyboard [ 8.842] (II) event4 - Wireless hotkeys: device is a keyboard [ 8.843] (II) event4 - Wireless hotkeys: device removed [ 8.880] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event4" [ 8.880] (II) XINPUT: Adding extended input device "Wireless hotkeys" (type: KEYBOARD, id 14) [ 8.880] (**) Option "xkb_model" "pc105+inet" [ 8.880] (**) Option "xkb_layout" "us" [ 8.880] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8.882] (II) event4 - Wireless hotkeys: is tagged by udev as: Keyboard [ 8.882] (II) event4 - Wireless hotkeys: device is a keyboard [ 36.241] (II) event2 - Power Button: device removed [ 36.273] (II) event11 - Video Bus: device removed [ 36.337] (II) event0 - Sleep Button: device removed [ 36.353] (II) event7 - SYNA3081:00 06CB:826F Mouse: device removed [ 36.387] (II) event8 - SYNA3081:00 06CB:826F Touchpad: device removed [ 36.420] (II) event3 - AT Translated Set 2 keyboard: device removed [ 36.437] (II) event10 - SynPS/2 Synaptics TouchPad: device removed [ 36.480] (II) event9 - HP WMI hotkeys: device removed [ 36.497] (II) event4 - Wireless hotkeys: device removed [ 36.530] (II) AIGLX: Suspending AIGLX clients for VT switch [ 3496.003] (II) config/udev: removing device Power Button [ 3496.003] (II) UnloadModule: "libinput" [ 3496.004] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 3496.004] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 3496.004] (**) Power Button: Applying InputClass "system-keyboard" [ 3496.004] (II) Using input driver 'libinput' for 'Power Button' [ 3496.004] (**) Power Button: always reports core events [ 3496.004] (**) Option "Device" "/dev/input/event2" [ 3496.005] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 3496.005] (II) event2 - Power Button: device is a keyboard [ 3496.006] (II) event2 - Power Button: device removed [ 3496.031] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 3496.031] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 3496.031] (**) Option "xkb_model" "pc105+inet" [ 3496.031] (**) Option "xkb_layout" "us" [ 3496.031] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 3496.032] (II) config/udev: removing device Video Bus [ 3496.032] (II) UnloadModule: "libinput" [ 3496.033] (II) config/udev: Adding input device Video Bus (/dev/input/event11) [ 3496.033] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 3496.033] (**) Video Bus: Applying InputClass "system-keyboard" [ 3496.033] (II) Using input driver 'libinput' for 'Video Bus' [ 3496.033] (**) Video Bus: always reports core events [ 3496.033] (**) Option "Device" "/dev/input/event11" [ 3496.039] (II) event11 - Video Bus: is tagged by udev as: Keyboard [ 3496.039] (II) event11 - Video Bus: device is a keyboard [ 3496.039] (II) event11 - Video Bus: device removed [ 3496.066] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input22/event11" [ 3496.066] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 3496.066] (**) Option "xkb_model" "pc105+inet" [ 3496.066] (**) Option "xkb_layout" "us" [ 3496.066] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 3496.067] (II) config/udev: Adding input device SYNA3081:00 06CB:826F Touchpad (/dev/input/mouse1) [ 3496.067] (II) No input driver specified, ignoring this device. [ 3496.067] (II) This device may have been added with another device file. [ 3496.068] (II) config/udev: Adding input device SYNA3081:00 06CB:826F Mouse (/dev/input/mouse0) [ 3496.068] (II) No input driver specified, ignoring this device. [ 3496.068] (II) This device may have been added with another device file. [ 3496.069] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 3496.069] (II) No input driver specified, ignoring this device. [ 3496.069] (II) This device may have been added with another device file. [ 3496.069] (II) config/udev: removing device Sleep Button [ 3496.069] (II) UnloadModule: "libinput" [ 3496.069] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 3496.069] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 3496.069] (**) Sleep Button: Applying InputClass "system-keyboard" [ 3496.069] (II) Using input driver 'libinput' for 'Sleep Button' [ 3496.070] (**) Sleep Button: always reports core events [ 3496.070] (**) Option "Device" "/dev/input/event0" [ 3496.071] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 3496.071] (II) event0 - Sleep Button: device is a keyboard [ 3496.071] (II) event0 - Sleep Button: device removed [ 3496.106] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 3496.106] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 3496.106] (**) Option "xkb_model" "pc105+inet" [ 3496.107] (**) Option "xkb_layout" "us" [ 3496.107] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 3496.108] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2) [ 3496.108] (II) No input driver specified, ignoring this device. [ 3496.108] (II) This device may have been added with another device file. [ 3496.108] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0) [ 3496.109] (II) No input driver specified, ignoring this device. [ 3496.109] (II) This device may have been added with another device file. [ 3496.109] (II) config/udev: removing device SYNA3081:00 06CB:826F Mouse [ 3496.109] (II) UnloadModule: "libinput" [ 3496.110] (II) config/udev: Adding input device SYNA3081:00 06CB:826F Mouse (/dev/input/event7) [ 3496.110] (**) SYNA3081:00 06CB:826F Mouse: Applying InputClass "libinput pointer catchall" [ 3496.110] (II) Using input driver 'libinput' for 'SYNA3081:00 06CB:826F Mouse' [ 3496.110] (**) SYNA3081:00 06CB:826F Mouse: always reports core events [ 3496.110] (**) Option "Device" "/dev/input/event7" [ 3496.112] (II) event7 - SYNA3081:00 06CB:826F Mouse: is tagged by udev as: Mouse Pointingstick [ 3496.118] (II) event7 - SYNA3081:00 06CB:826F Mouse: device is a pointer [ 3496.124] (II) event7 - SYNA3081:00 06CB:826F Mouse: device removed [ 3496.159] (II) libinput: SYNA3081:00 06CB:826F Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 3496.159] (II) libinput: SYNA3081:00 06CB:826F Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 3496.159] (II) libinput: SYNA3081:00 06CB:826F Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 3496.160] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA3081:00/0018:06CB:826F.0001/input/input18/event7" [ 3496.160] (II) XINPUT: Adding extended input device "SYNA3081:00 06CB:826F Mouse" (type: MOUSE, id 9) [ 3496.160] (**) Option "AccelerationScheme" "none" [ 3496.160] (**) SYNA3081:00 06CB:826F Mouse: (accel) selected scheme none/0 [ 3496.160] (**) SYNA3081:00 06CB:826F Mouse: (accel) acceleration factor: 2.000 [ 3496.160] (**) SYNA3081:00 06CB:826F Mouse: (accel) acceleration threshold: 4 [ 3496.160] (II) config/udev: removing device SYNA3081:00 06CB:826F Touchpad [ 3496.160] (II) UnloadModule: "libinput" [ 3496.161] (II) config/udev: Adding input device SYNA3081:00 06CB:826F Touchpad (/dev/input/event8) [ 3496.161] (**) SYNA3081:00 06CB:826F Touchpad: Applying InputClass "libinput touchpad catchall" [ 3496.161] (II) Using input driver 'libinput' for 'SYNA3081:00 06CB:826F Touchpad' [ 3496.161] (**) SYNA3081:00 06CB:826F Touchpad: always reports core events [ 3496.161] (**) Option "Device" "/dev/input/event8" [ 3496.162] (II) event8 - SYNA3081:00 06CB:826F Touchpad: is tagged by udev as: Touchpad [ 3496.164] (II) event8 - SYNA3081:00 06CB:826F Touchpad: device is a touchpad [ 3496.164] (II) event8 - SYNA3081:00 06CB:826F Touchpad: device removed [ 3496.219] (II) libinput: SYNA3081:00 06CB:826F Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 3496.219] (II) libinput: SYNA3081:00 06CB:826F Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 3496.219] (II) libinput: SYNA3081:00 06CB:826F Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 3496.220] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA3081:00/0018:06CB:826F.0001/input/input19/event8" [ 3496.220] (II) XINPUT: Adding extended input device "SYNA3081:00 06CB:826F Touchpad" (type: TOUCHPAD, id 10) [ 3496.223] (**) Option "AccelerationScheme" "none" [ 3496.223] (**) SYNA3081:00 06CB:826F Touchpad: (accel) selected scheme none/0 [ 3496.223] (**) SYNA3081:00 06CB:826F Touchpad: (accel) acceleration factor: 2.000 [ 3496.223] (**) SYNA3081:00 06CB:826F Touchpad: (accel) acceleration threshold: 4 [ 3496.225] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 3496.225] (II) No input driver specified, ignoring this device. [ 3496.225] (II) This device may have been added with another device file. [ 3496.225] (II) config/udev: removing device HP WMI hotkeys [ 3496.226] (II) UnloadModule: "libinput" [ 3496.226] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9) [ 3496.226] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 3496.226] (**) HP WMI hotkeys: Applying InputClass "system-keyboard" [ 3496.226] (II) Using input driver 'libinput' for 'HP WMI hotkeys' [ 3496.226] (**) HP WMI hotkeys: always reports core events [ 3496.226] (**) Option "Device" "/dev/input/event9" [ 3496.227] (II) event9 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 3496.227] (II) event9 - HP WMI hotkeys: device is a keyboard [ 3496.227] (II) event9 - HP WMI hotkeys: device removed [ 3496.270] (**) Option "config_info" "udev:/sys/devices/virtual/input/input17/event9" [ 3496.270] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13) [ 3496.270] (**) Option "xkb_model" "pc105+inet" [ 3496.270] (**) Option "xkb_layout" "us" [ 3496.270] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 3496.270] (II) config/udev: removing device Wireless hotkeys [ 3496.271] (II) UnloadModule: "libinput" [ 3496.271] (II) config/udev: Adding input device Wireless hotkeys (/dev/input/event4) [ 3496.271] (**) Wireless hotkeys: Applying InputClass "libinput keyboard catchall" [ 3496.271] (**) Wireless hotkeys: Applying InputClass "system-keyboard" [ 3496.271] (II) Using input driver 'libinput' for 'Wireless hotkeys' [ 3496.271] (**) Wireless hotkeys: always reports core events [ 3496.271] (**) Option "Device" "/dev/input/event4" [ 3496.273] (II) event4 - Wireless hotkeys: is tagged by udev as: Keyboard [ 3496.273] (II) event4 - Wireless hotkeys: device is a keyboard [ 3496.274] (II) event4 - Wireless hotkeys: device removed [ 3496.303] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event4" [ 3496.303] (II) XINPUT: Adding extended input device "Wireless hotkeys" (type: KEYBOARD, id 14) [ 3496.303] (**) Option "xkb_model" "pc105+inet" [ 3496.303] (**) Option "xkb_layout" "us" [ 3496.303] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 3496.304] (II) config/udev: removing device AT Translated Set 2 keyboard [ 3496.304] (II) UnloadModule: "libinput" [ 3496.305] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 3496.305] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 3496.305] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 3496.305] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 3496.305] (**) AT Translated Set 2 keyboard: always reports core events [ 3496.305] (**) Option "Device" "/dev/input/event3" [ 3496.308] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 3496.308] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 3496.309] (II) event3 - AT Translated Set 2 keyboard: device removed [ 3496.323] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 3496.323] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11) [ 3496.323] (**) Option "xkb_model" "pc105+inet" [ 3496.323] (**) Option "xkb_layout" "us" [ 3496.323] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 3496.324] (II) config/udev: removing device SynPS/2 Synaptics TouchPad [ 3496.324] (II) UnloadModule: "libinput" [ 3496.325] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10) [ 3496.325] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall" [ 3496.325] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad' [ 3496.325] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 3496.325] (**) Option "Device" "/dev/input/event10" [ 3496.327] (II) event10 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 3496.329] (II) event10 - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm [ 3496.333] (II) event10 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 3496.333] (II) event10 - SynPS/2 Synaptics TouchPad: device removed [ 3496.353] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 3496.353] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 3496.353] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 3496.354] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input12/event10" [ 3496.354] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12) [ 3496.358] (**) Option "AccelerationScheme" "none" [ 3496.358] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0 [ 3496.358] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 3496.358] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 3496.795] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event6) [ 3496.795] (II) No input driver specified, ignoring this device. [ 3496.795] (II) This device may have been added with another device file. [ 4220.847] (II) config/udev: removing device SynPS/2 Synaptics TouchPad [ 4220.847] (II) UnloadModule: "libinput" [ 4222.317] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2) [ 4222.317] (II) No input driver specified, ignoring this device. [ 4222.317] (II) This device may have been added with another device file. [ 4222.517] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10) [ 4222.517] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall" [ 4222.517] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad' [ 4222.517] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 4222.517] (**) Option "Device" "/dev/input/event10" [ 4222.521] (II) event10 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 4222.523] (II) event10 - SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm [ 4222.528] (II) event10 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 4222.528] (II) event10 - SynPS/2 Synaptics TouchPad: device removed [ 4222.553] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 4222.553] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 4222.553] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 4222.554] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input28/event10" [ 4222.554] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12) [ 4222.558] (**) Option "AccelerationScheme" "none" [ 4222.558] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0 [ 4222.558] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 4222.558] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 5707.869] (II) UnloadModule: "libinput" [ 5707.869] (II) UnloadModule: "libinput" [ 5707.869] (II) UnloadModule: "libinput" [ 5707.869] (II) UnloadModule: "libinput" [ 5707.869] (II) UnloadModule: "libinput" [ 5707.869] (II) UnloadModule: "libinput" [ 5707.869] (II) UnloadModule: "libinput" [ 5707.869] (II) UnloadModule: "libinput" [ 5707.870] (II) UnloadModule: "libinput" [ 5707.872] (II) Server terminated successfully (0). Closing log file.