[ 9.885] (--) Log file renamed from "/var/log/Xorg.pid-1630.log" to "/var/log/Xorg.0.log" [ 9.885] X.Org X Server 1.21.1.16 X Protocol Version 11, Revision 0 [ 9.885] Current Operating System: Linux XXX 6.14.0-27-generic #27-Ubuntu SMP PREEMPT_DYNAMIC Tue Jul 22 17:01:58 UTC 2025 x86_64 [ 9.885] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.14.0-27-generic root=UUID=HASH_962-1C2F-2D6E-34C3-7FED1B399C36 ro quiet splash vt.handoff=7 [ 9.885] xorg-server 2:21.1.16-1ubuntu1.1 (For technical support please see http://www.ubuntu.com/support) [ 9.885] Current version of pixman: 0.44.0 [ 9.885] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 9.885] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 9.885] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 3 00:50:34 2025 [ 9.886] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 9.886] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 9.887] (==) No Layout section. Using the first Screen section. [ 9.887] (==) No screen section available. Using defaults. [ 9.887] (**) |-->Screen "Default Screen Section" (0) [ 9.887] (**) | |-->Monitor "<default monitor>" [ 9.887] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 9.887] (**) Allowing byte-swapped clients [ 9.887] (==) Automatically adding devices [ 9.887] (==) Automatically enabling devices [ 9.887] (==) Automatically adding GPU devices [ 9.887] (==) Automatically binding GPU devices [ 9.887] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 9.887] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 9.887] Entry deleted from font path. [ 9.887] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 9.887] Entry deleted from font path. [ 9.887] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 9.887] Entry deleted from font path. [ 9.888] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 9.888] Entry deleted from font path. [ 9.888] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 9.888] Entry deleted from font path. [ 9.888] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 9.888] (==) ModulePath set to "/usr/lib/xorg/modules" [ 9.888] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 9.888] (II) Loader magic: 0x5f77e647b020 [ 9.888] (II) Module ABI versions: [ 9.888] X.Org ANSI C Emulation: 0.4 [ 9.888] X.Org Video Driver: 25.2 [ 9.888] X.Org XInput driver : 24.4 [ 9.888] X.Org Server Extension : 10.0 [ 9.888] (++) using VT number 2 [ 9.888] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 9.889] (II) xfree86: Adding drm device (/dev/dri/card1) [ 9.889] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1 [ 9.896] (--) PCI:*(0@0:2:0) 8086:a7a1:17aa:3805 rev 4, Mem @ 0x601c000000/16777216, 0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072 [ 9.896] (II) LoadModule: "glx" [ 9.897] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 9.901] (II) Module glx: vendor="X.Org Foundation" [ 9.901] compiled for 1.21.1.16, module version = 1.0.0 [ 9.901] ABI class: X.Org Server Extension, version 10.0 [ 9.901] (==) Matched modesetting as autoconfigured driver 0 [ 9.901] (==) Matched fbdev as autoconfigured driver 1 [ 9.901] (==) Matched vesa as autoconfigured driver 2 [ 9.901] (==) Assigned the driver to the xf86ConfigLayout [ 9.901] (II) LoadModule: "modesetting" [ 9.901] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 9.901] (II) Module modesetting: vendor="X.Org Foundation" [ 9.901] compiled for 1.21.1.16, module version = 1.21.1 [ 9.901] Module class: X.Org Video Driver [ 9.901] ABI class: X.Org Video Driver, version 25.2 [ 9.901] (II) LoadModule: "fbdev" [ 9.901] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 9.901] (II) Module fbdev: vendor="X.Org Foundation" [ 9.901] compiled for 1.21.1.11, module version = 0.5.0 [ 9.901] Module class: X.Org Video Driver [ 9.901] ABI class: X.Org Video Driver, version 25.2 [ 9.901] (II) LoadModule: "vesa" [ 9.901] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 9.902] (II) Module vesa: vendor="X.Org Foundation" [ 9.902] compiled for 1.21.1.11, module version = 2.6.0 [ 9.902] Module class: X.Org Video Driver [ 9.902] ABI class: X.Org Video Driver, version 25.2 [ 9.902] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 9.902] (II) FBDEV: driver for framebuffer: fbdev [ 9.902] (II) VESA: driver for VESA chipsets: vesa [ 9.912] (II) modeset(0): using drv /dev/dri/card1 [ 9.912] (WW) Falling back to old probe method for fbdev [ 9.912] (II) Loading sub module "fbdevhw" [ 9.912] (II) LoadModule: "fbdevhw" [ 9.912] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 9.912] (II) Module fbdevhw: vendor="X.Org Foundation" [ 9.912] compiled for 1.21.1.16, module version = 0.0.2 [ 9.912] ABI class: X.Org Video Driver, version 25.2 [ 9.912] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 9.912] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 9.912] (==) modeset(0): RGB weight 888 [ 9.912] (==) modeset(0): Default visual is TrueColor [ 9.912] (II) Loading sub module "glamoregl" [ 9.912] (II) LoadModule: "glamoregl" [ 9.912] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 9.915] (II) Module glamoregl: vendor="X.Org Foundation" [ 9.915] compiled for 1.21.1.16, module version = 1.0.1 [ 9.915] ABI class: X.Org ANSI C Emulation, version 0.4 [ 10.000] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Iris(R) Xe Graphics (RPL-U) [ 10.000] (II) modeset(0): glamor initialized [ 10.000] (==) modeset(0): VariableRefresh: disabled [ 10.000] (==) modeset(0): AsyncFlipSecondaries: disabled [ 10.002] (II) modeset(0): Output eDP-1 has no monitor section [ 10.007] (II) modeset(0): Output HDMI-1 has no monitor section [ 10.007] (II) modeset(0): Output DP-1 has no monitor section [ 10.007] (II) modeset(0): Output DP-2 has no monitor section [ 10.007] (II) modeset(0): Output DP-3 has no monitor section [ 10.007] (II) modeset(0): Output DP-4 has no monitor section [ 10.010] (II) modeset(0): EDID for output eDP-1 [ 10.010] (II) modeset(0): Manufacturer: BOE Model: a31 Serial#: ... [ 10.010] (II) modeset(0): Year: 2021 Week: 15 [ 10.010] (II) modeset(0): EDID Version: 1.4 [ 10.010] (II) modeset(0): Digital Display Input [ 10.010] (II) modeset(0): 8 bits per channel [ 10.010] (II) modeset(0): Digital interface is DisplayPort [ 10.010] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 22 [ 10.010] (II) modeset(0): Gamma: 2.20 [ 10.010] (II) modeset(0): No DPMS capabilities specified [ 10.010] (II) modeset(0): Supported color encodings: RGB 4:4:4 [ 10.010] (II) modeset(0): Default color space is primary color space [ 10.010] (II) modeset(0): First detailed timing is preferred mode [ 10.010] (II) modeset(0): Preferred mode is native pixel format and refresh rate [ 10.010] (II) modeset(0): Display is continuous-frequency [ 10.010] (II) modeset(0): redX: 0.586 redY: 0.366 greenX: 0.345 greenY: 0.573 [ 10.010] (II) modeset(0): blueX: 0.161 blueY: 0.126 whiteX: 0.313 whiteY: 0.329 [ 10.010] (II) modeset(0): Manufacturer's mask: 0 [ 10.010] (II) modeset(0): Supported detailed timing: [ 10.010] (II) modeset(0): clock: 161.8 MHz Image Size: 345 x 215 mm [ 10.010] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2140 h_border: 0 [ 10.010] (II) modeset(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1260 v_border: 0 [ 10.010] (II) modeset(0): Ranges: V min: 40 V max: 60 Hz, H min: 76 H max: 76 kHz, PixClock max 165 MHz [ 10.010] (II) modeset(0): BOE CQ [ 10.010] (II) modeset(0): NV160WUM-N43 [ 10.010] (II) modeset(0): Number of EDID sections to follow: 1 [ 10.010] (II) modeset(0): EDID (in hex): [ 10.010] (II) modeset(0): 00ffffffffffff0009e5310a00000000 [ 10.010] (II) modeset(0): 0f1f0104a5221678073755965d589229 [ 10.010] (II) modeset(0): 20505400000001010101010101010101 [ 10.010] (II) modeset(0): 010101010101333f80dc70b03c403020 [ 10.010] (II) modeset(0): 360059d71000001a000000fd00283c4c [ 10.010] (II) modeset(0): 4c10010a202020202020000000fe0042 [ 10.010] (II) modeset(0): 4f452043510a202020202020000000fe [ 10.010] (II) modeset(0): 004e5631363057554d2d4e34330a0159 [ 10.010] (II) modeset(0): 02030000681a00000101283c00000000 [ 10.010] (II) modeset(0): 00000000000000000000000000000000 [ 10.010] (II) modeset(0): 00000000000000000000000000000000 [ 10.010] (II) modeset(0): 00000000000000000000000000000000 [ 10.010] (II) modeset(0): 00000000000000000000000000000000 [ 10.010] (II) modeset(0): 00000000000000000000000000000000 [ 10.010] (II) modeset(0): 00000000000000000000000000000000 [ 10.010] (II) modeset(0): 000000000000000000000000000015fe [ 10.010] (II) modeset(0): Printing probed modes for output eDP-1 [ 10.010] (II) modeset(0): Modeline "1920x1200"x60.0 161.79 1920 1968 2000 2140 1200 1203 1209 1260 +hsync -vsync (75.6 kHz eP) [ 10.010] (II) modeset(0): Modeline "1920x1200"x60.0 154.13 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.1 kHz d) [ 10.010] (II) modeset(0): Modeline "1920x1080"x60.0 138.66 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz d) [ 10.010] (II) modeset(0): Modeline "1600x1200"x60.0 162.01 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d) [ 10.010] (II) modeset(0): Modeline "1680x1050"x60.0 119.24 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.8 kHz d) [ 10.010] (II) modeset(0): Modeline "1400x1050"x60.0 122.05 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d) [ 10.010] (II) modeset(0): Modeline "1600x900"x60.0 97.79 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.6 kHz d) [ 10.010] (II) modeset(0): Modeline "1280x1024"x60.0 107.97 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d) [ 10.010] (II) modeset(0): Modeline "1400x900"x60.0 86.68 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.6 kHz d) [ 10.010] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d) [ 10.010] (II) modeset(0): Modeline "1440x810"x60.0 151.94 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (100.0 kHz d) [ 10.010] (II) modeset(0): Modeline "1368x768"x60.0 72.43 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.4 kHz d) [ 10.010] (II) modeset(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.4 kHz d) [ 10.010] (II) modeset(0): Modeline "1280x720"x60.0 64.02 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.5 kHz d) [ 10.010] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 10.010] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d) [ 10.010] (II) modeset(0): Modeline "928x696"x60.0 109.06 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.3 kHz d) [ 10.010] (II) modeset(0): Modeline "896x672"x60.0 102.38 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.6 kHz d) [ 10.010] (II) modeset(0): Modeline "1024x576"x60.0 42.13 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.6 kHz d) [ 10.010] (II) modeset(0): Modeline "960x600"x60.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d) [ 10.010] (II) modeset(0): Modeline "960x540"x60.0 37.36 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.4 kHz d) [ 10.010] (II) modeset(0): Modeline "800x600"x60.0 38.40 800 824 896 1024 600 601 603 625 +hsync +vsync (37.5 kHz d) [ 10.010] (II) modeset(0): Modeline "840x525"x60.0 59.62 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.8 kHz d) [ 10.010] (II) modeset(0): Modeline "864x486"x60.0 30.72 864 912 944 1024 486 489 494 500 +hsync -vsync (30.0 kHz d) [ 10.010] (II) modeset(0): Modeline "700x525"x60.0 61.03 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) [ 10.010] (II) modeset(0): Modeline "800x450"x60.0 48.89 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.6 kHz d) [ 10.010] (II) modeset(0): Modeline "640x512"x60.0 53.98 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) [ 10.010] (II) modeset(0): Modeline "700x450"x60.0 43.34 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.6 kHz d) [ 10.010] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 10.010] (II) modeset(0): Modeline "720x405"x60.0 22.12 720 768 800 880 405 408 413 419 +hsync -vsync (25.1 kHz d) [ 10.010] (II) modeset(0): Modeline "684x384"x60.0 36.21 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d) [ 10.010] (II) modeset(0): Modeline "640x360"x60.0 17.95 640 688 720 800 360 363 368 374 +hsync -vsync (22.4 kHz d) [ 10.010] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 10.010] (II) modeset(0): Modeline "512x288"x60.0 21.03 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d) [ 10.010] (II) modeset(0): Modeline "480x270"x60.0 18.68 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.4 kHz d) [ 10.010] (II) modeset(0): Modeline "400x300"x60.0 19.17 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (37.4 kHz d) [ 10.010] (II) modeset(0): Modeline "432x243"x60.0 15.36 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (30.0 kHz d) [ 10.010] (II) modeset(0): Modeline "320x240"x60.0 12.58 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.4 kHz d) [ 10.010] (II) modeset(0): Modeline "360x202"x60.0 11.04 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (25.1 kHz d) [ 10.010] (II) modeset(0): Modeline "320x180"x60.0 8.98 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.4 kHz d) [ 10.015] (II) modeset(0): EDID for output HDMI-1 [ 10.015] (II) modeset(0): EDID for output DP-1 [ 10.015] (II) modeset(0): EDID for output DP-2 [ 10.015] (II) modeset(0): EDID for output DP-3 [ 10.015] (II) modeset(0): EDID for output DP-4 [ 10.015] (II) modeset(0): Output eDP-1 connected [ 10.015] (II) modeset(0): Output HDMI-1 disconnected [ 10.015] (II) modeset(0): Output DP-1 disconnected [ 10.015] (II) modeset(0): Output DP-2 disconnected [ 10.015] (II) modeset(0): Output DP-3 disconnected [ 10.015] (II) modeset(0): Output DP-4 disconnected [ 10.015] (II) modeset(0): Using exact sizes for initial modes [ 10.015] (II) modeset(0): Output eDP-1 using initial mode 1920x1200 +0+0 [ 10.015] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 10.015] (==) modeset(0): DPI set to (96, 96) [ 10.015] (II) Loading sub module "fb" [ 10.015] (II) LoadModule: "fb" [ 10.015] (II) Module "fb" already built-in [ 10.015] (II) UnloadModule: "fbdev" [ 10.015] (II) Unloading fbdev [ 10.015] (II) UnloadSubModule: "fbdevhw" [ 10.015] (II) Unloading fbdevhw [ 10.015] (II) UnloadModule: "vesa" [ 10.015] (II) Unloading vesa [ 10.033] (==) modeset(0): Backing store enabled [ 10.033] (==) modeset(0): Silken mouse enabled [ 10.112] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 10.113] (==) modeset(0): DPMS enabled [ 10.113] (II) modeset(0): [DRI2] Setup complete [ 10.113] (II) modeset(0): [DRI2] DRI driver: iris [ 10.113] (II) modeset(0): [DRI2] VDPAU driver: va_gl [ 10.113] (II) Initializing extension Generic Event Extension [ 10.113] (II) Initializing extension SHAPE [ 10.113] (II) Initializing extension MIT-SHM [ 10.114] (II) Initializing extension XInputExtension [ 10.114] (II) Initializing extension XTEST [ 10.114] (II) Initializing extension BIG-REQUESTS [ 10.114] (II) Initializing extension SYNC [ 10.114] (II) Initializing extension XKEYBOARD [ 10.114] (II) Initializing extension XC-MISC [ 10.114] (II) Initializing extension SECURITY [ 10.114] (II) Initializing extension XFIXES [ 10.114] (II) Initializing extension RENDER [ 10.114] (II) Initializing extension RANDR [ 10.114] (II) Initializing extension COMPOSITE [ 10.114] (II) Initializing extension DAMAGE [ 10.114] (II) Initializing extension MIT-SCREEN-SAVER [ 10.114] (II) Initializing extension DOUBLE-BUFFER [ 10.114] (II) Initializing extension RECORD [ 10.114] (II) Initializing extension DPMS [ 10.114] (II) Initializing extension Present [ 10.115] (II) Initializing extension DRI3 [ 10.115] (II) Initializing extension X-Resource [ 10.115] (II) Initializing extension XVideo [ 10.115] (II) Initializing extension XVideo-MotionCompensation [ 10.115] (II) Initializing extension SELinux [ 10.115] (II) SELinux: Disabled on system [ 10.115] (II) Initializing extension GLX [ 10.119] (II) AIGLX: Loaded and initialized iris [ 10.119] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 10.119] (II) Initializing extension XFree86-VidModeExtension [ 10.119] (II) Initializing extension XFree86-DGA [ 10.119] (II) Initializing extension XFree86-DRI [ 10.119] (II) Initializing extension DRI2 [ 10.120] (II) modeset(0): Damage tracking initialized [ 10.120] (II) modeset(0): Setting screen physical size to 508 x 317 [ 10.149] (II) config/udev: Adding input device Video Bus (/dev/input/event9) [ 10.149] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 10.149] (**) Video Bus: Applying InputClass "system-keyboard" [ 10.149] (II) LoadModule: "libinput" [ 10.149] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 10.151] (II) Module libinput: vendor="X.Org Foundation" [ 10.151] compiled for 1.21.1.15, module version = 1.5.0 [ 10.151] Module class: X.Org XInput Driver [ 10.151] ABI class: X.Org XInput driver, version 24.4 [ 10.151] (II) Using input driver 'libinput' for 'Video Bus' [ 10.151] (**) Video Bus: always reports core events [ 10.151] (**) Option "Device" "/dev/input/event9" [ 10.157] (II) event9 - Video Bus: is tagged by udev as: Keyboard [ 10.157] (II) event9 - Video Bus: device is a keyboard [ 10.157] (II) event9 - Video Bus: device removed [ 10.171] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input25/event9" [ 10.171] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6) [ 10.171] (**) Option "xkb_model" "pc105" [ 10.171] (**) Option "xkb_layout" "us" [ 10.171] (WW) Option "xkb_variant" requires a string value [ 10.171] (II) event9 - Video Bus: is tagged by udev as: Keyboard [ 10.171] (II) event9 - Video Bus: device is a keyboard [ 10.171] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 10.171] (II) No input driver specified, ignoring this device. [ 10.171] (II) This device may have been added with another device file. [ 10.172] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 10.172] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 10.172] (**) Power Button: Applying InputClass "system-keyboard" [ 10.172] (II) Using input driver 'libinput' for 'Power Button' [ 10.172] (**) Power Button: always reports core events [ 10.172] (**) Option "Device" "/dev/input/event1" [ 10.172] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 10.172] (II) event1 - Power Button: device is a keyboard [ 10.172] (II) event1 - Power Button: device removed [ 10.185] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 10.185] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 10.185] (**) Option "xkb_model" "pc105" [ 10.185] (**) Option "xkb_layout" "us" [ 10.185] (WW) Option "xkb_variant" requires a string value [ 10.185] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 10.185] (II) event1 - Power Button: device is a keyboard [ 10.186] (II) config/udev: Adding input device YICHIP JLab GO Keys (/dev/input/event3) [ 10.186] (**) YICHIP JLab GO Keys: Applying InputClass "libinput keyboard catchall" [ 10.186] (**) YICHIP JLab GO Keys: Applying InputClass "system-keyboard" [ 10.186] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys' [ 10.186] (**) YICHIP JLab GO Keys: always reports core events [ 10.186] (**) Option "Device" "/dev/input/event3" [ 10.186] (II) event3 - YICHIP JLab GO Keys: is tagged by udev as: Keyboard [ 10.186] (II) event3 - YICHIP JLab GO Keys: device is a keyboard [ 10.186] (II) event3 - YICHIP JLab GO Keys: device removed [ 10.202] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:145F:02FC.0003/input/input11/event3" [ 10.202] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys" (type: KEYBOARD, id 8) [ 10.202] (**) Option "xkb_model" "pc105" [ 10.202] (**) Option "xkb_layout" "us" [ 10.202] (WW) Option "xkb_variant" requires a string value [ 10.202] (II) event3 - YICHIP JLab GO Keys: is tagged by udev as: Keyboard [ 10.202] (II) event3 - YICHIP JLab GO Keys: device is a keyboard [ 10.203] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/event4) [ 10.203] (**) YICHIP JLab GO Keys Mouse: Applying InputClass "libinput pointer catchall" [ 10.203] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Mouse' [ 10.203] (**) YICHIP JLab GO Keys Mouse: always reports core events [ 10.203] (**) Option "Device" "/dev/input/event4" [ 10.203] (II) event4 - YICHIP JLab GO Keys Mouse: is tagged by udev as: Mouse [ 10.203] (II) event4 - YICHIP JLab GO Keys Mouse: device is a pointer [ 10.203] (II) event4 - YICHIP JLab GO Keys Mouse: device removed [ 10.230] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.230] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.230] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.230] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0004/input/input12/event4" [ 10.230] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Mouse" (type: MOUSE, id 9) [ 10.230] (**) Option "AccelerationScheme" "none" [ 10.230] (**) YICHIP JLab GO Keys Mouse: (accel) selected scheme none/0 [ 10.230] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration factor: 2.000 [ 10.230] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration threshold: 4 [ 10.230] (II) event4 - YICHIP JLab GO Keys Mouse: is tagged by udev as: Mouse [ 10.230] (II) event4 - YICHIP JLab GO Keys Mouse: device is a pointer [ 10.231] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/mouse0) [ 10.231] (II) No input driver specified, ignoring this device. [ 10.231] (II) This device may have been added with another device file. [ 10.231] (II) config/udev: Adding input device YICHIP JLab GO Keys System Control (/dev/input/event10) [ 10.231] (**) YICHIP JLab GO Keys System Control: Applying InputClass "libinput keyboard catchall" [ 10.231] (**) YICHIP JLab GO Keys System Control: Applying InputClass "system-keyboard" [ 10.231] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys System Control' [ 10.231] (**) YICHIP JLab GO Keys System Control: always reports core events [ 10.231] (**) Option "Device" "/dev/input/event10" [ 10.231] (II) event10 - YICHIP JLab GO Keys System Control: is tagged by udev as: Keyboard [ 10.232] (II) event10 - YICHIP JLab GO Keys System Control: device is a keyboard [ 10.232] (II) event10 - YICHIP JLab GO Keys System Control: device removed [ 10.248] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0004/input/input13/event10" [ 10.248] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys System Control" (type: KEYBOARD, id 10) [ 10.248] (**) Option "xkb_model" "pc105" [ 10.248] (**) Option "xkb_layout" "us" [ 10.248] (WW) Option "xkb_variant" requires a string value [ 10.248] (II) event10 - YICHIP JLab GO Keys System Control: is tagged by udev as: Keyboard [ 10.248] (II) event10 - YICHIP JLab GO Keys System Control: device is a keyboard [ 10.249] (II) config/udev: Adding input device YICHIP JLab GO Keys Consumer Control (/dev/input/event11) [ 10.249] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 10.249] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 10.249] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 10.249] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 10.249] (**) Option "Device" "/dev/input/event11" [ 10.249] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 10.249] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 10.249] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 10.267] (II) libinput: YICHIP JLab GO Keys Consumer Control: needs a virtual subdevice [ 10.267] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0004/input/input14/event11" [ 10.267] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: MOUSE, id 11) [ 10.267] (**) Option "AccelerationScheme" "none" [ 10.267] (**) YICHIP JLab GO Keys Consumer Control: (accel) selected scheme none/0 [ 10.267] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration factor: 2.000 [ 10.267] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration threshold: 4 [ 10.267] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 10.267] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 10.268] (II) config/udev: Adding input device SYNACF00:00 06CB:CF00 Mouse (/dev/input/event12) [ 10.268] (**) SYNACF00:00 06CB:CF00 Mouse: Applying InputClass "libinput pointer catchall" [ 10.268] (II) Using input driver 'libinput' for 'SYNACF00:00 06CB:CF00 Mouse' [ 10.268] (**) SYNACF00:00 06CB:CF00 Mouse: always reports core events [ 10.268] (**) Option "Device" "/dev/input/event12" [ 10.268] (II) event12 - SYNACF00:00 06CB:CF00 Mouse: is tagged by udev as: Mouse Pointingstick [ 10.268] (II) event12 - SYNACF00:00 06CB:CF00 Mouse: device is a pointer [ 10.268] (II) event12 - SYNACF00:00 06CB:CF00 Mouse: device removed [ 10.291] (II) libinput: SYNACF00:00 06CB:CF00 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.291] (II) libinput: SYNACF00:00 06CB:CF00 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.291] (II) libinput: SYNACF00:00 06CB:CF00 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.291] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-SYNACF00:00/0018:06CB:CF00.0001/input/input17/event12" [ 10.291] (II) XINPUT: Adding extended input device "SYNACF00:00 06CB:CF00 Mouse" (type: MOUSE, id 12) [ 10.291] (**) Option "AccelerationScheme" "none" [ 10.291] (**) SYNACF00:00 06CB:CF00 Mouse: (accel) selected scheme none/0 [ 10.291] (**) SYNACF00:00 06CB:CF00 Mouse: (accel) acceleration factor: 2.000 [ 10.291] (**) SYNACF00:00 06CB:CF00 Mouse: (accel) acceleration threshold: 4 [ 10.291] (II) event12 - SYNACF00:00 06CB:CF00 Mouse: is tagged by udev as: Mouse Pointingstick [ 10.291] (II) event12 - SYNACF00:00 06CB:CF00 Mouse: device is a pointer [ 10.292] (II) config/udev: Adding input device SYNACF00:00 06CB:CF00 Mouse (/dev/input/mouse1) [ 10.292] (II) No input driver specified, ignoring this device. [ 10.292] (II) This device may have been added with another device file. [ 10.292] (II) config/udev: Adding input device SYNACF00:00 06CB:CF00 Touchpad (/dev/input/event13) [ 10.292] (**) SYNACF00:00 06CB:CF00 Touchpad: Applying InputClass "libinput touchpad catchall" [ 10.292] (II) Using input driver 'libinput' for 'SYNACF00:00 06CB:CF00 Touchpad' [ 10.292] (**) SYNACF00:00 06CB:CF00 Touchpad: always reports core events [ 10.292] (**) Option "Device" "/dev/input/event13" [ 10.292] (II) event13 - SYNACF00:00 06CB:CF00 Touchpad: is tagged by udev as: Touchpad [ 10.293] (II) event13 - SYNACF00:00 06CB:CF00 Touchpad: device is a touchpad [ 10.293] (II) event13 - SYNACF00:00 06CB:CF00 Touchpad: device removed [ 10.319] (II) libinput: SYNACF00:00 06CB:CF00 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.319] (II) libinput: SYNACF00:00 06CB:CF00 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.319] (II) libinput: SYNACF00:00 06CB:CF00 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.319] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-SYNACF00:00/0018:06CB:CF00.0001/input/input18/event13" [ 10.319] (II) XINPUT: Adding extended input device "SYNACF00:00 06CB:CF00 Touchpad" (type: TOUCHPAD, id 13) [ 10.319] (**) Option "AccelerationScheme" "none" [ 10.319] (**) SYNACF00:00 06CB:CF00 Touchpad: (accel) selected scheme none/0 [ 10.319] (**) SYNACF00:00 06CB:CF00 Touchpad: (accel) acceleration factor: 2.000 [ 10.319] (**) SYNACF00:00 06CB:CF00 Touchpad: (accel) acceleration threshold: 4 [ 10.320] (II) event13 - SYNACF00:00 06CB:CF00 Touchpad: is tagged by udev as: Touchpad [ 10.321] (II) event13 - SYNACF00:00 06CB:CF00 Touchpad: device is a touchpad [ 10.321] (II) config/udev: Adding input device SYNACF00:00 06CB:CF00 Touchpad (/dev/input/mouse6) [ 10.321] (II) No input driver specified, ignoring this device. [ 10.321] (II) This device may have been added with another device file. [ 10.321] (II) config/udev: Adding input device Wacom HID 5365 Pen (/dev/input/event5) [ 10.321] (**) Wacom HID 5365 Pen: Applying InputClass "libinput tablet catchall" [ 10.321] (**) Wacom HID 5365 Pen: Applying InputClass "Wacom USB tablet class" [ 10.321] (**) Wacom HID 5365 Pen: Applying InputClass "Wacom tablet class" [ 10.321] (II) LoadModule: "wacom" [ 10.321] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so [ 10.323] (II) Module wacom: vendor="X.Org Foundation" [ 10.323] compiled for 1.21.1.11, module version = 1.2.0 [ 10.323] Module class: X.Org XInput Driver [ 10.323] ABI class: X.Org XInput driver, version 24.4 [ 10.323] (II) Build version: 1.2.0 [ 10.323] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire, Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8, Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8, Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660, CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L, CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12, Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800, PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931, DTU2231, DTU1631, DTH1152, DTH1152, DTK2451, DTH2452, DTH2452, Wacom One Pen Display 13, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9, Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint, Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M, Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M, Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2, Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer), Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, Cintiq 27QHDT, Cintiq 27QHDT, Mobilestudio Pro 13, MobileStudio Pro 16, MobileStudio Pro 13, MobileStudio Pro 16, Cintiq 13 FHD Pro, Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq 13 FHD Pro, Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq Pro 24, Mobilestudio Pro 13, MobileStudio Pro 16, MobileStudio Pro 13, MobileStudio Pro 16, MobileStudio Pro 16, MobileStudio Pro 16, TabletPC 0x90, TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus 0x9F, TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6, TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100, TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116, TabletPC 0x12C, TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000, TabletPC 0x5002, usb:172f:0024, usb:172f:0025, usb:172f:0026, usb:172f:0027, usb:172f:0028, usb:172f:0030, usb:172f:0031, usb:172f:0032, usb:172f:0033, usb:172f:0034, usb:172f:0035, usb:172f:0036, usb:172f:0037, usb:172f:0038, usb:172f:0039, usb:172f:0051, usb:172f:0052, usb:172f:0053, usb:172f:0054, usb:172f:0055, usb:172f:0056, usb:172f:0057, usb:172f:0058, usb:172f:0500, usb:172f:0501, usb:172f:0502, usb:172f:0503, usb:1b96:0001, usb:17ef:6004 [ 10.324] (II) Using input driver 'wacom' for 'Wacom HID 5365 Pen' [ 10.324] (**) Wacom HID 5365 Pen: always reports core events [ 10.324] (**) Option "Device" "/dev/input/event5" [ 10.324] (II) wacom: Wacom HID 5365 Pen: type not specified, assuming 'stylus'. [ 10.324] (II) wacom: Wacom HID 5365 Pen: other types will be automatically added. [ 10.324] (--) wacom: Wacom HID 5365 Pen stylus: using pressure threshold of 851 for button 1 [ 10.324] (**) wacom: Wacom HID 5365 Pen stylus: panscroll is 0 [ 10.324] (**) wacom: Wacom HID 5365 Pen stylus: panscroll modified to 1300 [ 10.324] (--) wacom: Wacom HID 5365 Pen stylus: maxX=34468 maxY=21542 maxZ=4095 resX=100000 resY=100000 tilt=enabled [ 10.324] (II) wacom: Wacom HID 5365 Pen stylus: hotplugging dependent devices. [ 10.324] (II) wacom: Wacom HID 5365 Pen stylus: hotplugging completed. [ 10.347] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-WACF22005365:00/0018:056A:5365.0002/input/input20/event5" [ 10.347] (II) XINPUT: Adding extended input device "Wacom HID 5365 Pen stylus" (type: STYLUS, id 14) [ 10.347] (**) Wacom HID 5365 Pen stylus: (accel) keeping acceleration scheme 1 [ 10.347] (**) Wacom HID 5365 Pen stylus: (accel) acceleration profile 0 [ 10.347] (**) Wacom HID 5365 Pen stylus: (accel) acceleration factor: 2.000 [ 10.347] (**) Wacom HID 5365 Pen stylus: (accel) acceleration threshold: 4 [ 10.347] (II) config/udev: Adding input device Wacom HID 5365 Pen (/dev/input/mouse2) [ 10.347] (II) No input driver specified, ignoring this device. [ 10.347] (II) This device may have been added with another device file. [ 10.347] (II) config/udev: Adding input device Wacom HID 5365 Finger (/dev/input/event6) [ 10.347] (**) Wacom HID 5365 Finger: Applying InputClass "libinput touchscreen catchall" [ 10.347] (**) Wacom HID 5365 Finger: Applying InputClass "Wacom USB touchscreen class" [ 10.347] (**) Wacom HID 5365 Finger: Applying InputClass "Wacom touchscreen class" [ 10.347] (II) Using input driver 'wacom' for 'Wacom HID 5365 Finger' [ 10.347] (**) Wacom HID 5365 Finger: always reports core events [ 10.347] (**) Option "Device" "/dev/input/event6" [ 10.347] (II) wacom: Wacom HID 5365 Finger: type not specified, assuming 'touch'. [ 10.347] (II) wacom: Wacom HID 5365 Finger: other types will be automatically added. [ 10.347] (**) wacom: Wacom HID 5365 Finger touch: panscroll is 0 [ 10.347] (**) wacom: Wacom HID 5365 Finger touch: panscroll modified to 13 [ 10.347] (--) wacom: Wacom HID 5365 Finger touch: maxX=13788 maxY=8616 maxZ=0 resX=40000 resY=40000 [ 10.347] (II) wacom: Wacom HID 5365 Finger touch: hotplugging dependent devices. [ 10.347] (II) wacom: Wacom HID 5365 Finger touch: hotplugging completed. [ 10.367] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-WACF22005365:00/0018:056A:5365.0002/input/input21/event6" [ 10.367] (II) XINPUT: Adding extended input device "Wacom HID 5365 Finger touch" (type: TOUCH, id 15) [ 10.367] (**) Wacom HID 5365 Finger touch: (accel) keeping acceleration scheme 1 [ 10.367] (**) Wacom HID 5365 Finger touch: (accel) acceleration profile 0 [ 10.367] (**) Wacom HID 5365 Finger touch: (accel) acceleration factor: 2.000 [ 10.367] (**) Wacom HID 5365 Finger touch: (accel) acceleration threshold: 4 [ 10.367] (II) config/udev: Adding input device Wacom HID 5365 Finger (/dev/input/mouse3) [ 10.367] (II) No input driver specified, ignoring this device. [ 10.367] (II) This device may have been added with another device file. [ 10.367] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event7) [ 10.367] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall" [ 10.367] (**) Ideapad extra buttons: Applying InputClass "system-keyboard" [ 10.367] (II) Using input driver 'libinput' for 'Ideapad extra buttons' [ 10.367] (**) Ideapad extra buttons: always reports core events [ 10.367] (**) Option "Device" "/dev/input/event7" [ 10.368] (II) event7 - Ideapad extra buttons: is tagged by udev as: Keyboard [ 10.368] (II) event7 - Ideapad extra buttons: device is a keyboard [ 10.368] (II) event7 - Ideapad extra buttons: device removed [ 10.388] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input23/event7" [ 10.388] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 16) [ 10.388] (**) Option "xkb_model" "pc105" [ 10.388] (**) Option "xkb_layout" "us" [ 10.388] (WW) Option "xkb_variant" requires a string value [ 10.388] (II) event7 - Ideapad extra buttons: is tagged by udev as: Keyboard [ 10.388] (II) event7 - Ideapad extra buttons: device is a keyboard [ 10.388] (II) config/udev: Adding input device sof-hda-dsp Mic (/dev/input/event14) [ 10.388] (II) No input driver specified, ignoring this device. [ 10.388] (II) This device may have been added with another device file. [ 10.389] (II) config/udev: Adding input device sof-hda-dsp Headphone (/dev/input/event15) [ 10.389] (**) sof-hda-dsp Headphone: Applying InputClass "libinput keyboard catchall" [ 10.389] (**) sof-hda-dsp Headphone: Applying InputClass "system-keyboard" [ 10.389] (II) Using input driver 'libinput' for 'sof-hda-dsp Headphone' [ 10.389] (**) sof-hda-dsp Headphone: always reports core events [ 10.389] (**) Option "Device" "/dev/input/event15" [ 10.389] (II) event15 - sof-hda-dsp Headphone: is tagged by udev as: Keyboard Switch [ 10.389] (II) event15 - sof-hda-dsp Headphone: device is a keyboard [ 10.389] (II) event15 - sof-hda-dsp Headphone: device removed [ 10.412] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input27/event15" [ 10.412] (II) XINPUT: Adding extended input device "sof-hda-dsp Headphone" (type: KEYBOARD, id 17) [ 10.412] (**) Option "xkb_model" "pc105" [ 10.412] (**) Option "xkb_layout" "us" [ 10.412] (WW) Option "xkb_variant" requires a string value [ 10.412] (II) event15 - sof-hda-dsp Headphone: is tagged by udev as: Keyboard Switch [ 10.412] (II) event15 - sof-hda-dsp Headphone: device is a keyboard [ 10.412] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=3 (/dev/input/event16) [ 10.412] (II) No input driver specified, ignoring this device. [ 10.412] (II) This device may have been added with another device file. [ 10.413] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=4 (/dev/input/event17) [ 10.413] (II) No input driver specified, ignoring this device. [ 10.413] (II) This device may have been added with another device file. [ 10.413] (II) config/udev: Adding input device sof-hda-dsp HDMI/DP,pcm=5 (/dev/input/event18) [ 10.413] (II) No input driver specified, ignoring this device. [ 10.413] (II) This device may have been added with another device file. [ 10.413] (II) config/udev: Adding input device Lenovo Yoga Tablet Mode Control switch (/dev/input/event8) [ 10.413] (II) No input driver specified, ignoring this device. [ 10.413] (II) This device may have been added with another device file. [ 10.413] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2) [ 10.413] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 10.413] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 10.413] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 10.413] (**) AT Translated Set 2 keyboard: always reports core events [ 10.413] (**) Option "Device" "/dev/input/event2" [ 10.413] (II) event2 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 10.413] (II) event2 - AT Translated Set 2 keyboard: device is a keyboard [ 10.414] (II) event2 - AT Translated Set 2 keyboard: device removed [ 10.430] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2" [ 10.430] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18) [ 10.430] (**) Option "xkb_model" "pc105" [ 10.430] (**) Option "xkb_layout" "us" [ 10.430] (WW) Option "xkb_variant" requires a string value [ 10.430] (II) event2 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 10.430] (II) event2 - AT Translated Set 2 keyboard: device is a keyboard [ 10.433] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 10.433] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 10.433] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 10.433] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 10.433] (**) Option "Device" "/dev/input/event11" [ 10.433] (II) libinput: YICHIP JLab GO Keys Consumer Control: is a virtual subdevice [ 10.433] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0004/input/input14/event11" [ 10.433] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: KEYBOARD, id 19) [ 10.433] (**) Option "xkb_model" "pc105" [ 10.433] (**) Option "xkb_layout" "us" [ 10.433] (WW) Option "xkb_variant" requires a string value [ 10.433] (**) Wacom HID 5365 Pen eraser: Applying InputClass "libinput tablet catchall" [ 10.433] (**) Wacom HID 5365 Pen eraser: Applying InputClass "Wacom USB tablet class" [ 10.433] (**) Wacom HID 5365 Pen eraser: Applying InputClass "Wacom tablet class" [ 10.433] (II) Using input driver 'wacom' for 'Wacom HID 5365 Pen eraser' [ 10.433] (**) Wacom HID 5365 Pen eraser: always reports core events [ 10.433] (**) Option "Device" "/dev/input/event5" [ 10.433] (**) Option "Type" "eraser" [ 10.433] (**) wacom: Wacom HID 5365 Pen eraser: panscroll is 1300 [ 10.433] (**) wacom: Wacom HID 5365 Pen eraser: panscroll modified to 1300 [ 10.433] (--) wacom: Wacom HID 5365 Pen eraser: maxX=34468 maxY=21542 maxZ=4095 resX=100000 resY=100000 tilt=enabled [ 10.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-WACF22005365:00/0018:056A:5365.0002/input/input20/event5" [ 10.456] (II) XINPUT: Adding extended input device "Wacom HID 5365 Pen eraser" (type: ERASER, id 20) [ 10.456] (**) Wacom HID 5365 Pen eraser: (accel) keeping acceleration scheme 1 [ 10.456] (**) Wacom HID 5365 Pen eraser: (accel) acceleration profile 0 [ 10.456] (**) Wacom HID 5365 Pen eraser: (accel) acceleration factor: 2.000 [ 10.456] (**) Wacom HID 5365 Pen eraser: (accel) acceleration threshold: 4 [ 10.545] (II) modeset(0): EDID vendor "BOE", prod id 2609 [ 10.545] (II) modeset(0): Using EDID range info for horizontal sync [ 10.545] (II) modeset(0): Using EDID range info for vertical refresh [ 10.545] (II) modeset(0): Printing DDC gathered Modelines: [ 10.545] (II) modeset(0): Modeline "1920x1200"x0.0 161.79 1920 1968 2000 2140 1200 1203 1209 1260 +hsync -vsync (75.6 kHz eP) [ 10.562] (II) modeset(0): EDID vendor "BOE", prod id 2609 [ 10.562] (II) modeset(0): Using hsync ranges from config file [ 10.562] (II) modeset(0): Using vrefresh ranges from config file [ 10.562] (II) modeset(0): Printing DDC gathered Modelines: [ 10.562] (II) modeset(0): Modeline "1920x1200"x0.0 161.79 1920 1968 2000 2140 1200 1203 1209 1260 +hsync -vsync (75.6 kHz eP) [ 10.578] (II) modeset(0): EDID vendor "BOE", prod id 2609 [ 10.578] (II) modeset(0): Using hsync ranges from config file [ 10.578] (II) modeset(0): Using vrefresh ranges from config file [ 10.578] (II) modeset(0): Printing DDC gathered Modelines: [ 10.578] (II) modeset(0): Modeline "1920x1200"x0.0 161.79 1920 1968 2000 2140 1200 1203 1209 1260 +hsync -vsync (75.6 kHz eP) [ 10.595] (II) modeset(0): EDID vendor "BOE", prod id 2609 [ 10.595] (II) modeset(0): Using hsync ranges from config file [ 10.595] (II) modeset(0): Using vrefresh ranges from config file [ 10.595] (II) modeset(0): Printing DDC gathered Modelines: [ 10.595] (II) modeset(0): Modeline "1920x1200"x0.0 161.79 1920 1968 2000 2140 1200 1203 1209 1260 +hsync -vsync (75.6 kHz eP) [ 15.272] (II) event9 - Video Bus: device removed [ 15.294] (II) event1 - Power Button: device removed [ 15.304] (II) event3 - YICHIP JLab GO Keys: device removed [ 15.311] (II) event4 - YICHIP JLab GO Keys Mouse: device removed [ 15.335] (II) event10 - YICHIP JLab GO Keys System Control: device removed [ 15.345] (II) event12 - SYNACF00:00 06CB:CF00 Mouse: device removed [ 15.361] (II) event13 - SYNACF00:00 06CB:CF00 Touchpad: device removed [ 15.380] (II) event7 - Ideapad extra buttons: device removed [ 15.396] (II) event15 - sof-hda-dsp Headphone: device removed [ 15.416] (II) event2 - AT Translated Set 2 keyboard: device removed [ 15.426] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 15.442] (II) AIGLX: Suspending AIGLX clients for VT switch [ 679.232] (II) config/udev: removing device YICHIP JLab GO Keys [ 679.232] (II) UnloadModule: "libinput" [ 679.283] (II) config/udev: removing device YICHIP JLab GO Keys Mouse [ 679.283] (II) UnloadModule: "libinput" [ 679.303] (II) config/udev: removing device YICHIP JLab GO Keys System Control [ 679.303] (II) UnloadModule: "libinput" [ 679.319] (II) config/udev: removing device YICHIP JLab GO Keys Consumer Control [ 679.319] (II) UnloadModule: "libinput" [ 679.319] (II) config/udev: removing device YICHIP JLab GO Keys Consumer Control [ 679.319] (II) UnloadModule: "libinput" [ 681.073] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/mouse0) [ 681.073] (II) No input driver specified, ignoring this device. [ 681.073] (II) This device may have been added with another device file. [ 681.096] (II) config/udev: Adding input device YICHIP JLab GO Keys (/dev/input/event3) [ 681.096] (**) YICHIP JLab GO Keys: Applying InputClass "libinput keyboard catchall" [ 681.096] (**) YICHIP JLab GO Keys: Applying InputClass "system-keyboard" [ 681.096] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys' [ 681.096] (**) YICHIP JLab GO Keys: always reports core events [ 681.096] (**) Option "Device" "/dev/input/event3" [ 681.097] (II) event3 - YICHIP JLab GO Keys: is tagged by udev as: Keyboard [ 681.097] (II) event3 - YICHIP JLab GO Keys: device is a keyboard [ 681.097] (II) event3 - YICHIP JLab GO Keys: device removed [ 681.105] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:145F:02FC.0007/input/input31/event3" [ 681.105] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys" (type: KEYBOARD, id 8) [ 681.105] (**) Option "xkb_model" "pc105" [ 681.105] (**) Option "xkb_layout" "us" [ 681.105] (WW) Option "xkb_variant" requires a string value [ 681.105] (II) config/udev: Adding input device YICHIP JLab GO Keys Consumer Control (/dev/input/event11) [ 681.105] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 681.105] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 681.105] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 681.105] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 681.105] (**) Option "Device" "/dev/input/event11" [ 681.107] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 681.107] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 681.107] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 681.117] (II) libinput: YICHIP JLab GO Keys Consumer Control: needs a virtual subdevice [ 681.117] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0008/input/input34/event11" [ 681.117] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: MOUSE, id 9) [ 681.117] (**) Option "AccelerationScheme" "none" [ 681.117] (**) YICHIP JLab GO Keys Consumer Control: (accel) selected scheme none/0 [ 681.117] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration factor: 2.000 [ 681.117] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration threshold: 4 [ 681.117] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 681.117] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 681.117] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 681.117] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 681.117] (**) Option "Device" "/dev/input/event11" [ 681.117] (II) libinput: YICHIP JLab GO Keys Consumer Control: is a virtual subdevice [ 681.117] (EE) libinput: YICHIP JLab GO Keys Consumer Control: Parent device not available [ 681.118] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 681.118] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 681.118] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 681.137] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0008/input/input34/event11" [ 681.137] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: KEYBOARD, id 10) [ 681.137] (**) Option "xkb_model" "pc105" [ 681.137] (**) Option "xkb_layout" "us" [ 681.137] (WW) Option "xkb_variant" requires a string value [ 681.137] (II) config/udev: Adding input device YICHIP JLab GO Keys System Control (/dev/input/event10) [ 681.137] (**) YICHIP JLab GO Keys System Control: Applying InputClass "libinput keyboard catchall" [ 681.137] (**) YICHIP JLab GO Keys System Control: Applying InputClass "system-keyboard" [ 681.137] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys System Control' [ 681.137] (**) YICHIP JLab GO Keys System Control: always reports core events [ 681.137] (**) Option "Device" "/dev/input/event10" [ 681.138] (II) event10 - YICHIP JLab GO Keys System Control: is tagged by udev as: Keyboard [ 681.138] (II) event10 - YICHIP JLab GO Keys System Control: device is a keyboard [ 681.138] (II) event10 - YICHIP JLab GO Keys System Control: device removed [ 681.157] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0008/input/input33/event10" [ 681.157] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys System Control" (type: KEYBOARD, id 11) [ 681.157] (**) Option "xkb_model" "pc105" [ 681.157] (**) Option "xkb_layout" "us" [ 681.157] (WW) Option "xkb_variant" requires a string value [ 681.157] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/event4) [ 681.157] (**) YICHIP JLab GO Keys Mouse: Applying InputClass "libinput pointer catchall" [ 681.157] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Mouse' [ 681.157] (**) YICHIP JLab GO Keys Mouse: always reports core events [ 681.157] (**) Option "Device" "/dev/input/event4" [ 681.158] (II) event4 - YICHIP JLab GO Keys Mouse: is tagged by udev as: Mouse [ 681.158] (II) event4 - YICHIP JLab GO Keys Mouse: device is a pointer [ 681.158] (II) event4 - YICHIP JLab GO Keys Mouse: device removed [ 681.178] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 681.178] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 681.178] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 681.178] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0008/input/input32/event4" [ 681.178] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Mouse" (type: MOUSE, id 19) [ 681.178] (**) Option "AccelerationScheme" "none" [ 681.178] (**) YICHIP JLab GO Keys Mouse: (accel) selected scheme none/0 [ 681.178] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration factor: 2.000 [ 681.178] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration threshold: 4 [ 953.416] (II) config/udev: removing device YICHIP JLab GO Keys [ 953.416] (II) UnloadModule: "libinput" [ 953.497] (II) config/udev: removing device YICHIP JLab GO Keys Mouse [ 953.497] (II) UnloadModule: "libinput" [ 953.518] (II) config/udev: removing device YICHIP JLab GO Keys System Control [ 953.518] (II) UnloadModule: "libinput" [ 953.536] (II) config/udev: removing device YICHIP JLab GO Keys Consumer Control [ 953.536] (II) UnloadModule: "libinput" [ 953.536] (II) config/udev: removing device YICHIP JLab GO Keys Consumer Control [ 953.536] (II) UnloadModule: "libinput" [ 958.051] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/mouse0) [ 958.052] (II) No input driver specified, ignoring this device. [ 958.052] (II) This device may have been added with another device file. [ 958.069] (II) config/udev: Adding input device YICHIP JLab GO Keys (/dev/input/event3) [ 958.069] (**) YICHIP JLab GO Keys: Applying InputClass "libinput keyboard catchall" [ 958.069] (**) YICHIP JLab GO Keys: Applying InputClass "system-keyboard" [ 958.069] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys' [ 958.069] (**) YICHIP JLab GO Keys: always reports core events [ 958.069] (**) Option "Device" "/dev/input/event3" [ 958.070] (II) event3 - YICHIP JLab GO Keys: is tagged by udev as: Keyboard [ 958.070] (II) event3 - YICHIP JLab GO Keys: device is a keyboard [ 958.070] (II) event3 - YICHIP JLab GO Keys: device removed [ 958.080] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:145F:02FC.0009/input/input37/event3" [ 958.080] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys" (type: KEYBOARD, id 8) [ 958.080] (**) Option "xkb_model" "pc105" [ 958.080] (**) Option "xkb_layout" "us" [ 958.080] (WW) Option "xkb_variant" requires a string value [ 958.080] (II) config/udev: Adding input device YICHIP JLab GO Keys Consumer Control (/dev/input/event11) [ 958.080] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 958.080] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 958.080] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 958.080] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 958.080] (**) Option "Device" "/dev/input/event11" [ 958.081] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 958.081] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 958.081] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 958.099] (II) libinput: YICHIP JLab GO Keys Consumer Control: needs a virtual subdevice [ 958.099] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.000A/input/input40/event11" [ 958.099] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: MOUSE, id 9) [ 958.099] (**) Option "AccelerationScheme" "none" [ 958.099] (**) YICHIP JLab GO Keys Consumer Control: (accel) selected scheme none/0 [ 958.099] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration factor: 2.000 [ 958.099] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration threshold: 4 [ 958.099] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 958.099] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 958.099] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 958.099] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 958.099] (**) Option "Device" "/dev/input/event11" [ 958.099] (II) libinput: YICHIP JLab GO Keys Consumer Control: is a virtual subdevice [ 958.099] (EE) libinput: YICHIP JLab GO Keys Consumer Control: Parent device not available [ 958.099] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 958.099] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 958.100] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 958.114] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.000A/input/input40/event11" [ 958.114] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: KEYBOARD, id 10) [ 958.114] (**) Option "xkb_model" "pc105" [ 958.114] (**) Option "xkb_layout" "us" [ 958.114] (WW) Option "xkb_variant" requires a string value [ 958.114] (II) config/udev: Adding input device YICHIP JLab GO Keys System Control (/dev/input/event10) [ 958.114] (**) YICHIP JLab GO Keys System Control: Applying InputClass "libinput keyboard catchall" [ 958.114] (**) YICHIP JLab GO Keys System Control: Applying InputClass "system-keyboard" [ 958.114] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys System Control' [ 958.114] (**) YICHIP JLab GO Keys System Control: always reports core events [ 958.114] (**) Option "Device" "/dev/input/event10" [ 958.115] (II) event10 - YICHIP JLab GO Keys System Control: is tagged by udev as: Keyboard [ 958.115] (II) event10 - YICHIP JLab GO Keys System Control: device is a keyboard [ 958.115] (II) event10 - YICHIP JLab GO Keys System Control: device removed [ 958.138] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.000A/input/input39/event10" [ 958.138] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys System Control" (type: KEYBOARD, id 11) [ 958.138] (**) Option "xkb_model" "pc105" [ 958.138] (**) Option "xkb_layout" "us" [ 958.138] (WW) Option "xkb_variant" requires a string value [ 958.138] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/event4) [ 958.138] (**) YICHIP JLab GO Keys Mouse: Applying InputClass "libinput pointer catchall" [ 958.138] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Mouse' [ 958.138] (**) YICHIP JLab GO Keys Mouse: always reports core events [ 958.138] (**) Option "Device" "/dev/input/event4" [ 958.138] (II) event4 - YICHIP JLab GO Keys Mouse: is tagged by udev as: Mouse [ 958.139] (II) event4 - YICHIP JLab GO Keys Mouse: device is a pointer [ 958.139] (II) event4 - YICHIP JLab GO Keys Mouse: device removed [ 958.163] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 958.163] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 958.163] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 958.163] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.000A/input/input38/event4" [ 958.163] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Mouse" (type: MOUSE, id 19) [ 958.163] (**) Option "AccelerationScheme" "none" [ 958.163] (**) YICHIP JLab GO Keys Mouse: (accel) selected scheme none/0 [ 958.163] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration factor: 2.000 [ 958.163] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration threshold: 4 [ 1359.700] (II) config/udev: removing device YICHIP JLab GO Keys [ 1359.700] (II) UnloadModule: "libinput" [ 1359.759] (II) config/udev: removing device YICHIP JLab GO Keys Mouse [ 1359.759] (II) UnloadModule: "libinput" [ 1359.784] (II) config/udev: removing device YICHIP JLab GO Keys System Control [ 1359.784] (II) UnloadModule: "libinput" [ 1359.802] (II) config/udev: removing device YICHIP JLab GO Keys Consumer Control [ 1359.802] (II) UnloadModule: "libinput" [ 1359.802] (II) config/udev: removing device YICHIP JLab GO Keys Consumer Control [ 1359.802] (II) UnloadModule: "libinput" [ 1365.204] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/mouse0) [ 1365.204] (II) No input driver specified, ignoring this device. [ 1365.204] (II) This device may have been added with another device file. [ 1365.231] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/event4) [ 1365.231] (**) YICHIP JLab GO Keys Mouse: Applying InputClass "libinput pointer catchall" [ 1365.231] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Mouse' [ 1365.231] (**) YICHIP JLab GO Keys Mouse: always reports core events [ 1365.231] (**) Option "Device" "/dev/input/event4" [ 1365.233] (II) event4 - YICHIP JLab GO Keys Mouse: is tagged by udev as: Mouse [ 1365.233] (II) event4 - YICHIP JLab GO Keys Mouse: device is a pointer [ 1365.233] (II) event4 - YICHIP JLab GO Keys Mouse: device removed [ 1365.244] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1365.244] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1365.244] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1365.244] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.000C/input/input44/event4" [ 1365.244] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Mouse" (type: MOUSE, id 8) [ 1365.244] (**) Option "AccelerationScheme" "none" [ 1365.244] (**) YICHIP JLab GO Keys Mouse: (accel) selected scheme none/0 [ 1365.244] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration factor: 2.000 [ 1365.244] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration threshold: 4 [ 1365.244] (II) config/udev: Adding input device YICHIP JLab GO Keys Consumer Control (/dev/input/event11) [ 1365.244] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 1365.244] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 1365.244] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 1365.244] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 1365.244] (**) Option "Device" "/dev/input/event11" [ 1365.245] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 1365.246] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 1365.246] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 1365.269] (II) libinput: YICHIP JLab GO Keys Consumer Control: needs a virtual subdevice [ 1365.269] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.000C/input/input46/event11" [ 1365.269] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: MOUSE, id 9) [ 1365.269] (**) Option "AccelerationScheme" "none" [ 1365.269] (**) YICHIP JLab GO Keys Consumer Control: (accel) selected scheme none/0 [ 1365.269] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration factor: 2.000 [ 1365.269] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration threshold: 4 [ 1365.269] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 1365.269] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 1365.269] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 1365.269] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 1365.269] (**) Option "Device" "/dev/input/event11" [ 1365.269] (II) libinput: YICHIP JLab GO Keys Consumer Control: is a virtual subdevice [ 1365.269] (EE) libinput: YICHIP JLab GO Keys Consumer Control: Parent device not available [ 1365.270] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 1365.270] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 1365.270] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 1365.290] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.000C/input/input46/event11" [ 1365.290] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: KEYBOARD, id 10) [ 1365.290] (**) Option "xkb_model" "pc105" [ 1365.290] (**) Option "xkb_layout" "us" [ 1365.290] (WW) Option "xkb_variant" requires a string value [ 1365.290] (II) config/udev: Adding input device YICHIP JLab GO Keys (/dev/input/event3) [ 1365.290] (**) YICHIP JLab GO Keys: Applying InputClass "libinput keyboard catchall" [ 1365.290] (**) YICHIP JLab GO Keys: Applying InputClass "system-keyboard" [ 1365.290] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys' [ 1365.290] (**) YICHIP JLab GO Keys: always reports core events [ 1365.290] (**) Option "Device" "/dev/input/event3" [ 1365.291] (II) event3 - YICHIP JLab GO Keys: is tagged by udev as: Keyboard [ 1365.291] (II) event3 - YICHIP JLab GO Keys: device is a keyboard [ 1365.291] (II) event3 - YICHIP JLab GO Keys: device removed [ 1365.307] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:145F:02FC.000B/input/input43/event3" [ 1365.307] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys" (type: KEYBOARD, id 11) [ 1365.307] (**) Option "xkb_model" "pc105" [ 1365.307] (**) Option "xkb_layout" "us" [ 1365.307] (WW) Option "xkb_variant" requires a string value [ 1365.307] (II) config/udev: Adding input device YICHIP JLab GO Keys System Control (/dev/input/event10) [ 1365.307] (**) YICHIP JLab GO Keys System Control: Applying InputClass "libinput keyboard catchall" [ 1365.307] (**) YICHIP JLab GO Keys System Control: Applying InputClass "system-keyboard" [ 1365.307] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys System Control' [ 1365.307] (**) YICHIP JLab GO Keys System Control: always reports core events [ 1365.307] (**) Option "Device" "/dev/input/event10" [ 1365.308] (II) event10 - YICHIP JLab GO Keys System Control: is tagged by udev as: Keyboard [ 1365.308] (II) event10 - YICHIP JLab GO Keys System Control: device is a keyboard [ 1365.308] (II) event10 - YICHIP JLab GO Keys System Control: device removed [ 1365.319] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.000C/input/input45/event10" [ 1365.319] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys System Control" (type: KEYBOARD, id 19) [ 1365.319] (**) Option "xkb_model" "pc105" [ 1365.319] (**) Option "xkb_layout" "us" [ 1365.319] (WW) Option "xkb_variant" requires a string value [ 1752.179] (II) config/udev: removing device YICHIP JLab GO Keys [ 1752.179] (II) UnloadModule: "libinput" [ 1752.255] (II) config/udev: removing device YICHIP JLab GO Keys Mouse [ 1752.255] (II) UnloadModule: "libinput" [ 1752.284] (II) config/udev: removing device YICHIP JLab GO Keys System Control [ 1752.284] (II) UnloadModule: "libinput" [ 1752.313] (II) config/udev: removing device YICHIP JLab GO Keys Consumer Control [ 1752.313] (II) UnloadModule: "libinput" [ 1752.313] (II) config/udev: removing device YICHIP JLab GO Keys Consumer Control [ 1752.313] (II) UnloadModule: "libinput" [ 1755.104] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/mouse0) [ 1755.104] (II) No input driver specified, ignoring this device. [ 1755.104] (II) This device may have been added with another device file. [ 1755.141] (II) config/udev: Adding input device YICHIP JLab GO Keys System Control (/dev/input/event10) [ 1755.141] (**) YICHIP JLab GO Keys System Control: Applying InputClass "libinput keyboard catchall" [ 1755.141] (**) YICHIP JLab GO Keys System Control: Applying InputClass "system-keyboard" [ 1755.141] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys System Control' [ 1755.141] (**) YICHIP JLab GO Keys System Control: always reports core events [ 1755.141] (**) Option "Device" "/dev/input/event10" [ 1755.142] (II) event10 - YICHIP JLab GO Keys System Control: is tagged by udev as: Keyboard [ 1755.142] (II) event10 - YICHIP JLab GO Keys System Control: device is a keyboard [ 1755.142] (II) event10 - YICHIP JLab GO Keys System Control: device removed [ 1755.159] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.000E/input/input51/event10" [ 1755.159] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys System Control" (type: KEYBOARD, id 8) [ 1755.159] (**) Option "xkb_model" "pc105" [ 1755.159] (**) Option "xkb_layout" "us" [ 1755.159] (WW) Option "xkb_variant" requires a string value [ 1755.159] (II) config/udev: Adding input device YICHIP JLab GO Keys Consumer Control (/dev/input/event11) [ 1755.159] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 1755.159] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 1755.159] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 1755.159] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 1755.159] (**) Option "Device" "/dev/input/event11" [ 1755.160] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 1755.160] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 1755.160] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 1755.184] (II) libinput: YICHIP JLab GO Keys Consumer Control: needs a virtual subdevice [ 1755.184] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.000E/input/input52/event11" [ 1755.184] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: MOUSE, id 9) [ 1755.184] (**) Option "AccelerationScheme" "none" [ 1755.184] (**) YICHIP JLab GO Keys Consumer Control: (accel) selected scheme none/0 [ 1755.184] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration factor: 2.000 [ 1755.184] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration threshold: 4 [ 1755.184] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 1755.184] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 1755.184] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 1755.184] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 1755.184] (**) Option "Device" "/dev/input/event11" [ 1755.184] (II) libinput: YICHIP JLab GO Keys Consumer Control: is a virtual subdevice [ 1755.184] (EE) libinput: YICHIP JLab GO Keys Consumer Control: Parent device not available [ 1755.184] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 1755.184] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 1755.184] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 1755.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.000E/input/input52/event11" [ 1755.200] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: KEYBOARD, id 10) [ 1755.200] (**) Option "xkb_model" "pc105" [ 1755.200] (**) Option "xkb_layout" "us" [ 1755.200] (WW) Option "xkb_variant" requires a string value [ 1755.200] (II) config/udev: Adding input device YICHIP JLab GO Keys (/dev/input/event3) [ 1755.200] (**) YICHIP JLab GO Keys: Applying InputClass "libinput keyboard catchall" [ 1755.200] (**) YICHIP JLab GO Keys: Applying InputClass "system-keyboard" [ 1755.200] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys' [ 1755.200] (**) YICHIP JLab GO Keys: always reports core events [ 1755.200] (**) Option "Device" "/dev/input/event3" [ 1755.201] (II) event3 - YICHIP JLab GO Keys: is tagged by udev as: Keyboard [ 1755.201] (II) event3 - YICHIP JLab GO Keys: device is a keyboard [ 1755.201] (II) event3 - YICHIP JLab GO Keys: device removed [ 1755.226] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:145F:02FC.000D/input/input49/event3" [ 1755.226] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys" (type: KEYBOARD, id 11) [ 1755.226] (**) Option "xkb_model" "pc105" [ 1755.226] (**) Option "xkb_layout" "us" [ 1755.226] (WW) Option "xkb_variant" requires a string value [ 1755.226] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/event4) [ 1755.226] (**) YICHIP JLab GO Keys Mouse: Applying InputClass "libinput pointer catchall" [ 1755.226] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Mouse' [ 1755.226] (**) YICHIP JLab GO Keys Mouse: always reports core events [ 1755.226] (**) Option "Device" "/dev/input/event4" [ 1755.227] (II) event4 - YICHIP JLab GO Keys Mouse: is tagged by udev as: Mouse [ 1755.227] (II) event4 - YICHIP JLab GO Keys Mouse: device is a pointer [ 1755.227] (II) event4 - YICHIP JLab GO Keys Mouse: device removed [ 1755.249] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1755.249] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1755.249] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1755.249] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.000E/input/input50/event4" [ 1755.249] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Mouse" (type: MOUSE, id 19) [ 1755.251] (**) Option "AccelerationScheme" "none" [ 1755.251] (**) YICHIP JLab GO Keys Mouse: (accel) selected scheme none/0 [ 1755.251] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration factor: 2.000 [ 1755.251] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration threshold: 4 [ 2250.370] (II) config/udev: removing device YICHIP JLab GO Keys [ 2250.370] (II) UnloadModule: "libinput" [ 2250.443] (II) config/udev: removing device YICHIP JLab GO Keys Mouse [ 2250.443] (II) UnloadModule: "libinput" [ 2250.459] (II) config/udev: removing device YICHIP JLab GO Keys System Control [ 2250.460] (II) UnloadModule: "libinput" [ 2250.481] (II) config/udev: removing device YICHIP JLab GO Keys Consumer Control [ 2250.481] (II) UnloadModule: "libinput" [ 2250.481] (II) config/udev: removing device YICHIP JLab GO Keys Consumer Control [ 2250.481] (II) UnloadModule: "libinput" [ 2253.409] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/mouse0) [ 2253.409] (II) No input driver specified, ignoring this device. [ 2253.409] (II) This device may have been added with another device file. [ 2253.434] (II) config/udev: Adding input device YICHIP JLab GO Keys Consumer Control (/dev/input/event11) [ 2253.434] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 2253.434] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 2253.434] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 2253.434] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 2253.434] (**) Option "Device" "/dev/input/event11" [ 2253.434] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 2253.434] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 2253.434] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 2253.447] (II) libinput: YICHIP JLab GO Keys Consumer Control: needs a virtual subdevice [ 2253.447] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0010/input/input58/event11" [ 2253.447] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: MOUSE, id 8) [ 2253.447] (**) Option "AccelerationScheme" "none" [ 2253.447] (**) YICHIP JLab GO Keys Consumer Control: (accel) selected scheme none/0 [ 2253.447] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration factor: 2.000 [ 2253.447] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration threshold: 4 [ 2253.447] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 2253.447] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 2253.447] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 2253.447] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 2253.447] (**) Option "Device" "/dev/input/event11" [ 2253.447] (II) libinput: YICHIP JLab GO Keys Consumer Control: is a virtual subdevice [ 2253.447] (EE) libinput: YICHIP JLab GO Keys Consumer Control: Parent device not available [ 2253.448] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 2253.448] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 2253.448] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 2253.458] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0010/input/input58/event11" [ 2253.458] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: KEYBOARD, id 9) [ 2253.458] (**) Option "xkb_model" "pc105" [ 2253.458] (**) Option "xkb_layout" "us" [ 2253.458] (WW) Option "xkb_variant" requires a string value [ 2253.458] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/event4) [ 2253.458] (**) YICHIP JLab GO Keys Mouse: Applying InputClass "libinput pointer catchall" [ 2253.458] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Mouse' [ 2253.458] (**) YICHIP JLab GO Keys Mouse: always reports core events [ 2253.458] (**) Option "Device" "/dev/input/event4" [ 2253.459] (II) event4 - YICHIP JLab GO Keys Mouse: is tagged by udev as: Mouse [ 2253.459] (II) event4 - YICHIP JLab GO Keys Mouse: device is a pointer [ 2253.459] (II) event4 - YICHIP JLab GO Keys Mouse: device removed [ 2253.471] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2253.471] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2253.471] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2253.471] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0010/input/input56/event4" [ 2253.471] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Mouse" (type: MOUSE, id 10) [ 2253.471] (**) Option "AccelerationScheme" "none" [ 2253.471] (**) YICHIP JLab GO Keys Mouse: (accel) selected scheme none/0 [ 2253.471] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration factor: 2.000 [ 2253.471] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration threshold: 4 [ 2253.471] (II) config/udev: Adding input device YICHIP JLab GO Keys (/dev/input/event3) [ 2253.471] (**) YICHIP JLab GO Keys: Applying InputClass "libinput keyboard catchall" [ 2253.471] (**) YICHIP JLab GO Keys: Applying InputClass "system-keyboard" [ 2253.471] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys' [ 2253.471] (**) YICHIP JLab GO Keys: always reports core events [ 2253.471] (**) Option "Device" "/dev/input/event3" [ 2253.472] (II) event3 - YICHIP JLab GO Keys: is tagged by udev as: Keyboard [ 2253.472] (II) event3 - YICHIP JLab GO Keys: device is a keyboard [ 2253.472] (II) event3 - YICHIP JLab GO Keys: device removed [ 2253.488] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:145F:02FC.000F/input/input55/event3" [ 2253.488] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys" (type: KEYBOARD, id 11) [ 2253.488] (**) Option "xkb_model" "pc105" [ 2253.488] (**) Option "xkb_layout" "us" [ 2253.488] (WW) Option "xkb_variant" requires a string value [ 2253.488] (II) config/udev: Adding input device YICHIP JLab GO Keys System Control (/dev/input/event10) [ 2253.488] (**) YICHIP JLab GO Keys System Control: Applying InputClass "libinput keyboard catchall" [ 2253.488] (**) YICHIP JLab GO Keys System Control: Applying InputClass "system-keyboard" [ 2253.488] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys System Control' [ 2253.488] (**) YICHIP JLab GO Keys System Control: always reports core events [ 2253.488] (**) Option "Device" "/dev/input/event10" [ 2253.489] (II) event10 - YICHIP JLab GO Keys System Control: is tagged by udev as: Keyboard [ 2253.489] (II) event10 - YICHIP JLab GO Keys System Control: device is a keyboard [ 2253.489] (II) event10 - YICHIP JLab GO Keys System Control: device removed [ 2253.499] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0010/input/input57/event10" [ 2253.499] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys System Control" (type: KEYBOARD, id 19) [ 2253.499] (**) Option "xkb_model" "pc105" [ 2253.499] (**) Option "xkb_layout" "us" [ 2253.499] (WW) Option "xkb_variant" requires a string value [ 2691.584] (II) config/udev: removing device YICHIP JLab GO Keys [ 2691.584] (II) UnloadModule: "libinput" [ 2691.655] (II) config/udev: removing device YICHIP JLab GO Keys Mouse [ 2691.655] (II) UnloadModule: "libinput" [ 2691.673] (II) config/udev: removing device YICHIP JLab GO Keys System Control [ 2691.673] (II) UnloadModule: "libinput" [ 2691.694] (II) config/udev: removing device YICHIP JLab GO Keys Consumer Control [ 2691.694] (II) UnloadModule: "libinput" [ 2691.694] (II) config/udev: removing device YICHIP JLab GO Keys Consumer Control [ 2691.694] (II) UnloadModule: "libinput" [ 2694.244] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/mouse0) [ 2694.244] (II) No input driver specified, ignoring this device. [ 2694.244] (II) This device may have been added with another device file. [ 2694.268] (II) config/udev: Adding input device YICHIP JLab GO Keys Mouse (/dev/input/event4) [ 2694.268] (**) YICHIP JLab GO Keys Mouse: Applying InputClass "libinput pointer catchall" [ 2694.268] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Mouse' [ 2694.268] (**) YICHIP JLab GO Keys Mouse: always reports core events [ 2694.268] (**) Option "Device" "/dev/input/event4" [ 2694.269] (II) event4 - YICHIP JLab GO Keys Mouse: is tagged by udev as: Mouse [ 2694.269] (II) event4 - YICHIP JLab GO Keys Mouse: device is a pointer [ 2694.269] (II) event4 - YICHIP JLab GO Keys Mouse: device removed [ 2694.279] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2694.279] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2694.279] (II) libinput: YICHIP JLab GO Keys Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2694.279] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0012/input/input62/event4" [ 2694.279] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Mouse" (type: MOUSE, id 8) [ 2694.279] (**) Option "AccelerationScheme" "none" [ 2694.279] (**) YICHIP JLab GO Keys Mouse: (accel) selected scheme none/0 [ 2694.279] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration factor: 2.000 [ 2694.279] (**) YICHIP JLab GO Keys Mouse: (accel) acceleration threshold: 4 [ 2694.279] (II) config/udev: Adding input device YICHIP JLab GO Keys Consumer Control (/dev/input/event11) [ 2694.279] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 2694.279] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 2694.279] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 2694.279] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 2694.279] (**) Option "Device" "/dev/input/event11" [ 2694.280] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 2694.280] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 2694.281] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 2694.291] (II) libinput: YICHIP JLab GO Keys Consumer Control: needs a virtual subdevice [ 2694.291] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0012/input/input64/event11" [ 2694.291] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: MOUSE, id 9) [ 2694.291] (**) Option "AccelerationScheme" "none" [ 2694.291] (**) YICHIP JLab GO Keys Consumer Control: (accel) selected scheme none/0 [ 2694.291] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration factor: 2.000 [ 2694.291] (**) YICHIP JLab GO Keys Consumer Control: (accel) acceleration threshold: 4 [ 2694.291] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "libinput keyboard catchall" [ 2694.291] (**) YICHIP JLab GO Keys Consumer Control: Applying InputClass "system-keyboard" [ 2694.291] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys Consumer Control' [ 2694.291] (**) YICHIP JLab GO Keys Consumer Control: always reports core events [ 2694.291] (**) Option "Device" "/dev/input/event11" [ 2694.291] (II) libinput: YICHIP JLab GO Keys Consumer Control: is a virtual subdevice [ 2694.291] (EE) libinput: YICHIP JLab GO Keys Consumer Control: Parent device not available [ 2694.292] (II) event11 - YICHIP JLab GO Keys Consumer Control: is tagged by udev as: Keyboard [ 2694.292] (II) event11 - YICHIP JLab GO Keys Consumer Control: device is a keyboard [ 2694.292] (II) event11 - YICHIP JLab GO Keys Consumer Control: device removed [ 2694.313] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0012/input/input64/event11" [ 2694.313] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys Consumer Control" (type: KEYBOARD, id 10) [ 2694.313] (**) Option "xkb_model" "pc105" [ 2694.313] (**) Option "xkb_layout" "us" [ 2694.313] (WW) Option "xkb_variant" requires a string value [ 2694.313] (II) config/udev: Adding input device YICHIP JLab GO Keys (/dev/input/event3) [ 2694.313] (**) YICHIP JLab GO Keys: Applying InputClass "libinput keyboard catchall" [ 2694.313] (**) YICHIP JLab GO Keys: Applying InputClass "system-keyboard" [ 2694.313] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys' [ 2694.313] (**) YICHIP JLab GO Keys: always reports core events [ 2694.313] (**) Option "Device" "/dev/input/event3" [ 2694.314] (II) event3 - YICHIP JLab GO Keys: is tagged by udev as: Keyboard [ 2694.314] (II) event3 - YICHIP JLab GO Keys: device is a keyboard [ 2694.314] (II) event3 - YICHIP JLab GO Keys: device removed [ 2694.322] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:145F:02FC.0011/input/input61/event3" [ 2694.322] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys" (type: KEYBOARD, id 11) [ 2694.322] (**) Option "xkb_model" "pc105" [ 2694.322] (**) Option "xkb_layout" "us" [ 2694.322] (WW) Option "xkb_variant" requires a string value [ 2694.322] (II) config/udev: Adding input device YICHIP JLab GO Keys System Control (/dev/input/event10) [ 2694.322] (**) YICHIP JLab GO Keys System Control: Applying InputClass "libinput keyboard catchall" [ 2694.322] (**) YICHIP JLab GO Keys System Control: Applying InputClass "system-keyboard" [ 2694.322] (II) Using input driver 'libinput' for 'YICHIP JLab GO Keys System Control' [ 2694.322] (**) YICHIP JLab GO Keys System Control: always reports core events [ 2694.322] (**) Option "Device" "/dev/input/event10" [ 2694.323] (II) event10 - YICHIP JLab GO Keys System Control: is tagged by udev as: Keyboard [ 2694.323] (II) event10 - YICHIP JLab GO Keys System Control: device is a keyboard [ 2694.323] (II) event10 - YICHIP JLab GO Keys System Control: device removed [ 2694.339] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:145F:02FC.0012/input/input63/event10" [ 2694.339] (II) XINPUT: Adding extended input device "YICHIP JLab GO Keys System Control" (type: KEYBOARD, id 19) [ 2694.339] (**) Option "xkb_model" "pc105" [ 2694.339] (**) Option "xkb_layout" "us" [ 2694.339] (WW) Option "xkb_variant" requires a string value [ 2811.821] (II) UnloadModule: "wacom" [ 2811.821] (II) UnloadModule: "libinput" [ 2811.821] (II) UnloadModule: "libinput" [ 2811.821] (II) UnloadModule: "libinput" [ 2811.821] (II) UnloadModule: "wacom" [ 2811.821] (II) UnloadModule: "wacom" [ 2811.821] (II) UnloadModule: "libinput" [ 2811.821] (II) UnloadModule: "libinput" [ 2811.821] (II) UnloadModule: "libinput" [ 2811.821] (II) UnloadModule: "libinput" [ 2811.821] (II) UnloadModule: "libinput" [ 2811.821] (II) UnloadModule: "libinput" [ 2811.821] (II) UnloadModule: "libinput" [ 2811.821] (II) UnloadModule: "libinput" [ 2811.822] (II) UnloadModule: "libinput" [ 2811.823] (II) Server terminated successfully (0). Closing log file.